JIP cutting oil

JIP189 chlorine-free screw cutting spray, environmentally friendly chlorine-free thread cutting lubricant, imported from Japan, environmentally friendly chlorine-free material, suitable for thread tapping cutting lubrication, no need to worry about corrosion of materials or tools.

feature of product:

• Environmentally friendly chlorine-free thread cutting lubricant that does not use chlorinated paraffin and other raw materials, so there is no need to worry about the production of dioxin
• Based on mineral oil and using non-reactive additives, there is no need to worry about corrosion of materials or tools.
• No odor caused by sulfur additives
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

Used for thread cutting, drilling, reaming, broaching of steel, various metals and non-metals, and lubrication during cutting

Performance/Characteristics:

Fusion load: 2120N

Steel plate corrosion: 1a (100℃x1hr)

Kinematic viscosity (40℃): 44.7cSt

Operating temperature range: below 100℃

capacity:

420ml

Cutting lubricant, also known as cutting oil, cutting fluid, or lubricant, is an auxiliary effect of lubrication during the cutting process. Japan's original JIP114 super cutting lubricant is an environmentally friendly super cutting oil cutting agent, super cutting lubricating spray, chlorine-free and inactive sulfur type, suitable for various materials from light cutting to difficult cutting.

Product Features:

• Environmentally friendly cutting agent that does not contain chlorine, phosphorus, active sulfur, or heavy metals
• Suitable for a variety of materials from light cutting to difficult cutting
• Contains no chlorine, so no need to worry about dioxin production
• Based on mineral oil and using non-reactive additives, there is no need to worry about corrosion of materials or tools.
• No odor caused by sulfur additives
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

Used for tapping, thread cutting, drilling, reaming, broaching and other difficult-to-cut materials such as stainless steel, aluminum, copper and titanium alloys to lubricate during the cutting process

Performance/Characteristics:

Fusion load: 2452N

Steel plate corrosion: 1a (100℃x1hr)

Kinematic viscosity (40℃): 44.7cSt

Operating temperature range: below 100℃

capacity:

420ml

Cutting lubricant, also known as cutting oil, cutting fluid, or lubricant, is an auxiliary effect of lubrication during the cutting process. Japan's original JIP111 stainless steel cutting lubricant can speed up the cutting speed and improve work efficiency for difficult-to-cut stainless steel and aluminum materials.

Product Features:

• JIP111 cutting lubricant for stainless steel, the role of chlorine-based extreme pressure additives can prevent welding
• Effective for difficult-to-cut materials, such as stainless steel, aluminum, etc.
• Speed ​​up cutting speed and improve work efficiency
• Reduce cutting edge wear and extend tool life
• Helps smooth chip removal and prevents burrs, curls, chips and bites
• Beautify the finished surface and improve dimensional accuracy
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

Used for tapping, thread cutting, drilling, reaming, broaching and other difficult-to-cut materials such as stainless steel, aluminum, copper and titanium alloys to lubricate during the cutting process

Performance/Characteristics:

Fusion load: 4903N

Steel plate corrosion: 1a (100℃x1hr)

Kinematic viscosity (40℃): 36cSt

Operating temperature range: below 100℃

capacity:

330ml