Sort by:
16 products
16 products
- Made in Taiwan, chromium vanadium steel Japanese diagonal pliers (Japanese electrician wire strippers, Japanese diagonal pliers, Japanese diagonal electrician shears, Japanese nozzle shears, Japanese diagonal nose pliers, Japanese electrician scissors, Japanese Electrician wire cutters, Japanese style offset pliers)
- The whole body is made of CR-V chromium vanadium alloy steel with special heat treatment and surface anti-rust treatment.
- The blade is specially ground, sharp and durable
- Precision cutout design
- Non-slip grip for easy use
- Suitable for electricians, telecommunications, electronics, electrical appliances and automobile maintenance
Product specifications:
- FM902106: 6"
- Suitable for soft iron wire 1.2mm and copper wire 2.0mm or less
- Chrome vanadium steel electronic plastic diagonal pliers made in Taiwan
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Precision notch design, cutting wires instantly
- Comes with springs and can be cut out of plastic, a favorite among model makers
- Comply with JIS standards, precise manufacturing process and excellent quality
- Hardness as high as 54~62 degrees
- Suitable for model making and electronics, telecommunications, communications, and electrician maintenance
- Non-slip handle for easy use
Product specifications:
- FM900306: 6 inches
- Made in Taiwan, chrome vanadium steel electronic diagonal pliers (electrician's wire strippers, diagonal nose pliers, diagonal electrician's shears, nozzle shears, diagonal nose pliers, electrician's pliers, electrician's wire cutters, offset pliers)
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Easy cutting of fine and precise wires
- Hardness 54~62 degrees
- Precision cutout design, non-slip handle, easy to use
-
A good tool for electronics, telecommunications, communication, electrician repair and model making
Product specifications:
- FM900104: 4 inches
- FM900105: 5 inches
※4" is suitable for soft wires below 1.0mm
※Not suitable for cutting steel wires
- Made in Taiwan, chrome vanadium steel diagonal nose pliers for electricians (wire strippers for electricians, diagonal nose pliers for electricians, diagonal nose electrician shears for electricians, water cutters for electricians, diagonal nose pliers for electricians, electrician shears, wire cutters for electricians, Electrician's offset pliers)
- The whole body adopts special heat treatment of chromium vanadium alloy steel, which has higher hardness than carbon steel and is super durable.
- Attached spring, easier to use
- The blade is specially ground, sharp and durable
- Comfortable grip design
- Hardness 54~62 degrees
-
Applicable to electricians, telecommunications, communications, electronics, and automobile industries
Scope of application:
- Iron wire 2.0mm or less ※Not applicable to steel wire
Product specifications:
- 6"(150mm)
- Round electronic needle-nose pliers made in Taiwan (round needle-nose pliers, round needle-nose pliers, round long-nose pliers, round-nose pliers with teeth, round electrician's pliers, round electrician's wire cutters)
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Sawtooth design, easy to bite and easy to use
- Hardness as high as 54~62 degrees
- Non-slip handle for easy use
- Suitable for electronics, telecommunications, communication and electrician maintenance
Product specifications:
- FM900205: 5 inches
feature of product:
- Multifunctional electronic pliers, suitable for wire stripping, wire cutting and terminal crimping functions
- Multifunctional design, with diagonal pliers, wire strippers, wire cutters, crimping pliers, etc. One plier can be used as multiple pliers
- The cable hole design can be used for water and electricity connections, wire pulling and other fortifications.
- Additional opening lock ensures safe use
-
SK5 alloy steel material
Product specifications:
Product number | Specification | full length |
---|---|---|
FM800004 | 7" (170mm) | 170mm |
Product material: S K5 alloy steel
- Electronic needle nose pliers made in Taiwan
- The whole body adopts special heat treatment of chromium vanadium alloy steel
- The blade is specially ground, sharp and durable
- Clamping work of precision and small wires
- The front-end serrated design makes it easy to engage and use, and will not slip off.
- Hardness as high as 54~62 degrees
- Non-slip handle, easy to operate and use
- Widely used in electricians, electronic communication maintenance and operations
Product specifications:
- FM900245: 4.5 inches
- Electronic needle-nose pliers made in Taiwan (needle-nose pliers, needle-nose pliers, long-nose pliers, toothed pliers, electrician's pliers, electrician's wire cutters)
- The whole body adopts special heat treatment of chromium vanadium alloy steel
- The blade is specially ground, sharp and durable
- Clamping work of precision and small wires
- The front-end serrated design makes it easy to engage and use, and will not slip off.
- Hardness as high as 54~62 degrees
- Non-slip handle, easy to operate and use
-
Widely used in electricians, electronic communication maintenance and operations
Product specifications:
- FM903006: 6 inches 150mm
- Japanese-style needle-nose pliers made in Taiwan (needle-nose pliers, needle-nose pliers, long-nose pliers, toothed pliers, electrician's pliers, electrician's wire cutters)
- The whole body adopts special heat treatment of chromium vanadium alloy steel
- The blade is specially ground, sharp and durable
- Clamping work of precision and small wires
- The front-end serrated design makes it easy to engage and use, and will not slip off.
- Hardness as high as 54~62 degrees
- Non-slip handle, easy to operate and use
- Widely used in electricians, electronic communication maintenance and operations
Product specifications:
- FM903206: 6 inches 150mm
- Made in Taiwan, fine electronic needle nose pliers
- The slender tip is equipped with a cutting device. It is easy to cut precise and careful wires, and the operation in narrow places is smoother.
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Sawtooth design, easy to bite and easy to use
- Hardness as high as 54~62 degrees
- Non-slip handle for easy use
- Suitable for electronics, telecommunications, communication and electrician maintenance
Product specifications:
- FM900206: 6 inches
- 6-inch chrome vanadium steel plastic diagonal pliers, specially ground blade, ultra-thin blade, sharp and quick to trim burrs
- Suitable for PVC, PE, rubber, burr trimming
- 6-inch chrome vanadium steel plastic diagonal pliers, suitable for cutting burrs in plastic injection operations
- Diagonal nose pliers (electrician wire cutters) suitable for cutting off thin copper wire ends in electronics, communication electronics, and electricians.
- CR-V chromium vanadium alloy material manufacturing
- TPR anti-slip handle, extended grip, comfortable to hold and less effort
-
Plastic diagonal pliers Diagonal nose pliers Wire cutter Offset pliers
Product specifications/materials:
- Material: CR-V chromium vanadium alloy steel
- Size: 6"(150mm)
Notice:
- Please do not cut lead wire or steel wire above 1mm.
- Not suitable for cutting copper wires above 2mm
Origin:
- Taiwan
- 8-inch labor-saving wire pliers (vise, wire cutter, vise)
- Chrome molybdenum steel casting, can cut piano alloy steel wire
- The knife edge is treated with high frequency, making it tough and durable.
- The serrated blade is sharp and can cut steel wires
- Torque balance, labor-saving and easy
- Ergonomic PVC anti-slip handle wire cutters, easy to hold and won’t fall off
Product specifications:
- Size: 8"(200mm)
- Cutting capacity: iron wire 3.4mm / spring steel wire 2.1mm / electric wire 5.5mm
- 8-inch chrome vanadium steel plastic diagonal pliers, specially ground blade, ultra-thin blade, sharp and quick to trim burrs
- Suitable for PVC, PE, rubber, burr trimming
- 8-inch chrome vanadium steel plastic diagonal pliers, suitable for cutting burrs in plastic injection operations
- Diagonal nose pliers (electrician wire cutters) suitable for cutting off thin copper wire ends in electronics, communication electronics, and electricians.
- CR-V chromium vanadium alloy material manufacturing
-
TPR anti-slip handle, extended grip, comfortable to hold and less effort
Product specifications/materials:
- Material: CR-V chromium vanadium alloy steel
- Size: 8"(205mm)
Notice:
- The cutting edge is not suitable for cutting iron wire and steel wire.
Origin:
- Taiwan
- Multifunctional wire cable crimping pliers made in Taiwan
- Multi-function wire cable crimping pliers, with the functions of crimping pliers/wire cutters/cable cutters
- Electrician cuts off cable wire terminals and crimps them for use
- Strong bite function
- Cutting of cables below 38mm2
- The round hole inside the blade can be cut off:
- Soft iron wire below 2mm
- Lead wire below 3mm
- The handle is equipped with a crimping function, suitable for terminals below 5.5mm 2
- The handle is covered with TPR for a comfortable grip.
- Suitable for construction, water and electricity projects, electricians and DIY operations
Product specifications:
Specification | Material | Blade hardness |
9",(225mm) |
Cr-MO chromium molybdenum alloy steel |
HRC 54-62 o |
Notice:
It is strictly prohibited to cut steel and iron wire with the knife edge
- Labor-saving wire cutters made in Taiwan (labor-saving water nozzle pliers, labor-saving needle nose pliers, labor-saving iron cutting pliers, labor-saving steel bar cutting pliers, labor-saving wire cutting pliers)
- Chrome molybdenum steel casting, can cut piano alloy steel wire
- The knife edge is treated with high frequency, making it tough and durable.
- The serrated blade is sharp and can cut steel wires
- Torque balance, labor-saving and easy
- Ergonomic PVC anti-slip handle, easy to hold and won’t fall off
- Labor-saving wire cutter vise made in Taiwan (labor-saving water-nozzle pliers, labor-saving needle-nosed pliers, labor-saving iron cutting pliers, labor-saving steel bar cutting pliers, labor-saving wire cutting pliers)
- 9-inch labor-saving wire cutter with crimping vise. Crimping capacity: 1.25, 2.0, 5.5, 8.0mm
- Effortless pressing, the cutting edge of the wire pliers is treated with high frequency, tough and sharp
- Labor-saving wire cutters, increased torque and balance, labor-saving and easy
- Effortless pressing wire cutter cutting capabilities:
- Mild steel wire: 2.5mm
- Soft iron wire: 4.2mm
- Labor-saving wire pliers with pressure-sensitive vise, made of chromium-molybdenum steel, with ergonomic PVC anti-slip handles that are easy to hold and will not fall off
-
The vise is suitable for general construction such as electronics and communications
Product specifications:
Specification | Suppress ability | Blade hardness | Overall hardness | Origin |
---|---|---|---|---|
9",230mm | 1.25, 2.0, 5.5, 8.0mm | HRC 61-67 degrees | HRC 43-49 degrees | Taiwan |