310ml iron professional labor-saving reinforcement gun, silicone gun, silicone gun, made in Taiwan (DS00004)

• Made in Taiwan, the professional iron glue gun is made in Taiwan (the iron professional glue gun, the iron professional glue syringe, the iron professional silicone gun, the iron professional silicone gun, the iron professional silicone gun) Special caulking injection gun for glue gun)
• 26:1 labor-saving ratio, the mechanism design is labor-saving and easy to promote
• Iron professional type reinforcement glue and silicone special reinforcement gun
• Glue implant syringe, strengthened structure, easy to operate
• Glue planting gun/glue planting syringe, the push amount is stable, the injection flow is easy to control, and the amount of glue planting can be saved
• It has a good effect when used with our company's MIP300/PEA300 reinforcement glue. It can also be used with reinforcement glue from different brands.

Applicable: 300ml (including the following) glue or silicone

Introduction to use:

1. Make sure the surface to be followed by caulking is dry and clean
2. Cut the silicone glue front end
3. Connect the catheter head, and then cut off the catheter head at a 45° angle according to the output volume.
4. Install the silicone onto the silicone gun
5. You can put paper masking tape on both sides of the construction area (or tear off the tape without leaving any adhesive residue) to prevent the silicone from sticking to other places.
6. Apply silicone to the construction site

Applicable Products:

• PEA300 Reinforcement Adhesive Chemical Anchor Chemical Anka Adhesive