C-700 Hydrophilic PU foaming agent single-liquid high-pressure pouring material waterproofing and water-stopping agent (DPC700)

C-700 hydrophilic high-pressure infusion foaming agent is a single-liquid type water-foaming and water-stopping agent. It is used to stop cracks. It uses the principle of foaming and expansion with water (moisture) and is poured into the cracks of the building with a high-pressure infusion machine. , and achieve the function of water stop and reinforcement.

feature of product:

• Single liquid type is ready for use and can be mixed with any water (including seawater)
• The foaming expansion material is non-toxic and insoluble in water, will not cause water pollution, and has no secondary pollution.
• It reacts chemically when it comes into contact with water and foams and expands to form an elastic colloid. It has stretchability and compression resistance, so it is especially suitable for construction sites where there is concern about extrusion and expansion.
• Does not contain CFC and other foaming agents and will not pose a threat to the earth's ozone layer
• Suitable for use with high-pressure filling machines

Application scope:

• Water seepage, water stopping and structural reinforcement of cracks in various cement buildings such as buildings, bridges, tunnels, etc.
• Grouting columns for geological stability improvement of factory bases, building bases, general land, etc.
• Sealing moisture cracks in concrete elements
• Sealing damp joints
• Fissure injection for underground water flow under hydraulic pressure
• Underwater structure with large expansion ratio

Product specifications:

Precautions:

• Extremely sensitive to moisture, should be stored in a cool, well-ventilated and dry place. Do not expose to direct sunlight and keep away from sources of fire.
• Pay attention to air circulation at the construction site and wear protective equipment appropriately, such as masks, goggles, gloves, etc.
• Please store unused materials tightly in a dry and cool place indoors, and try to use them up within a short period of time to avoid affecting the quality of the materials.