Japan's original imported ICHINEN CHEMICALS CO., LTD. NX512 dry chain oil, water-resistant extreme pressure chain lubricant, is a white extreme pressure penetrating lubricating grease (with white solid lubricant), which has superior Water resistance and adhesion, lubrication and anti-rust effects are excellent.

feature of product:

• NX512 dry chain oil has penetrating properties and can penetrate into details
• NX512 dry chain oil, strong anti-corrosion, does not affect O-rings
• Excellent adhesion, minimal spatter, and excellent performance
• Excellent water resistance, acid resistance and alkali resistance, it can maintain its performance even if water splashes on its surface
• Good penetration spreads oil into every detail
• Because it contains white solid lubricant, it has extremely strong lubricity and can withstand pressure, and has good silencing effect during friction.
• Operating temperature range -15℃ to 120℃
• It is also possible to spray upside down, making it easy to spray even in small areas

internal volume:

• 300ml

Instructions:

• Shake your chain well before spraying it.
• Due to the low viscosity when sprayed, after spraying on high-speed rotating chains such as bicycle chains, they should be left for about 20 minutes.
• Clean the chain first if possible.
• 30-60 minutes after spraying, the lubrication will dry and show performance.

※Notice:

NX512 dry chain oil is flammable, please keep away from fire sources or high temperatures.

JIP125 metal mold rust inhibitor is a liquid vaporized rust inhibitor, most suitable for rust protection of molds, precision machinery and various metals.

Product Features:

• Vaporizable, it can reach parts that cannot be directly sprayed by sprays, and can exert an anti-rust effect in subtle areas.
• After coating, an anti-rust film can be formed on the metal surface. The oxidized anti-rust molecules will absorb water molecules and convert them into anti-rust water, thereby preventing rust.
• Matched with metal molds, no cleaning required, effective after 2-3 sprays, shortening operation time
• It will not penetrate from the details of the metal mold and will not stain the finished product.
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

• Anti-rust agent, used for molds, various metal products and precision machinery (special for sealed anti-rust)
• Coating small metal parts with metal mold anti-rust agent and sealing them in plastic bags can prevent rust.

Performance/Characteristics:

• Completely sealed and rust-proof: 1-2 years
• Quasi-sealed rust prevention: half a year to 1 year
• Operating temperature range: below 80℃

capacity:

420ml

ICHINEN CHEMICALS CO., LTD. JIP130 ultra-durable rust-proof galvanized paint is a spray product made of single-liquid concentrated zinc and epoxy resin paint, which is anti-rust and super durable.

Concentrated galvanizing anti-rust agent anti-rust paint uses ultra-fine powdered metallic zinc to prevent iron corrosion in an electrically scientific and chemical manner. At the same time, a gradually stable insoluble protective film will be formed on the surface of the zinc powder, thereby increasing the anti-corrosion performance, even if the metal surface has been If there are scratches, you can also use this product to prevent rust and corrosion.

feature of product:

• Japan's ultra-durable anti-rust galvanized paint (concentrated galvanized anti-rust agent anti-rust paint, cold galvanized agent anti-rust spray paint)
• Super durable anti-rust galvanized paint, galvanized anti-rust paint, anti-rust and anti-corrosion
• Concentrated galvanizing anti-rust agent and anti-rust paint are easily adsorbed on the base metal
• Can be used to protect metal surfaces even if they are scratched or damaged
• Cold galvanizing agent anti-rust spray paint salt spray anti-rust test up to 500 hours, good anti-rust effect
• After the Japanese ultra-durable anti-rust galvanized coating is applied, any paint or coating can be applied. However, "phthalic acid" paint may cause delamination, so please do not use it.

Product specifications:

• Capacity 450g
• Color: silver gray

Performance/Characteristics::

• Metal powder in dry coating: 84% or more
• Soaked in tap water: more than 1 year
• Outdoor rust prevention: more than 2 years
• Drying time: Touch dry: About 5 minutes based on 20 degrees C / Curing and drying: 7 hours
• Salt spray anti-rust test: more than 500 hours (generally about 250 hours on the market)
• Film thickness: 15~25μm (this is the basis for one coating, and may vary depending on coating speed, distance, etc.)
• Coating area: 0.4~0.6m2 (calculated based on film thickness 30-40μm, there will be differences depending on the coating)

use:

• Cold galvanizing agent anti-rust spray paint is used for galvanizing repairs, primer anti-rust for welding parts, and anti-corrosion for steel pipes
• Suitable for oil drilling equipment, chemical industry, ship power equipment, car body manufacturing, storage tanks, bridges, harbor mechanical facilities, terminal equipment, railway equipment, buildings, vehicles, agricultural machinery, chemical instrumentation, etc.

Operating temperature range:

• Heat resistance ( short time ) : 180 ℃
• Heat resistance ( long time ) : below 150 ℃

ICHINEN CHEMICALS CO., LTD. JIP117 electronic parts cleaner, quick-drying type, has little effect on various resins and rubbers, and is super effective at degreasing and cleaning electronic parts.

feature of product:

• Japan's original JIP117 electronic parts cleaner can clean electronic parts wiring base plates.
• Electronic component cleaning agent can clean and remove carbon and grease from electronic contacts.
• Electronic parts cleaners are chemical cleaners with low toxicity.
• Electronic contact cleaner, quick-drying type, has minimal impact on various resins and rubbers.
• Suitable for cleaning electric lamps, electronic machinery, precision machinery, general machinery and parts .

use:

• Clean various machine wiring boards
• Clean the relay contacts of various machines and restore contact functions
• Clean pin jacks, volume connectors, etc.
• Degreasing and cleaning metal parts, etc.

Performance/Characteristics:

• Operating temperature range: normal temperature

Product specifications:

• Content volume: 420ml

Instructions:

• When spraying, keep the distance from the target object about 20 cm
• Before applying power, wipe the parts with a cloth to dry and make sure the air is dry
• Exhaust the solvent vapor and then turn on the electricity. It can also be used for contact cleaning. It has little effect on rubber and plastic, but please do not overdose.

※Notice:

JIP117 electronic parts cleaner is flammable, please do not use it when the power is on.

Do not use too much electronic parts cleaner on rubber, plastic, or painted surfaces.

This product cannot be used with certain materials, such as PS, PC and PPO.

Please stay away from fire sources or high temperature places.

Originally imported from Japan ICHINEN CHEMICALS Company, Lubricating 303 anti-rust lubricating penetrating agent (penetrating anti-rust lubricating oil/anti-rust lubricant) has anti-rust, lubrication, penetrating and other functions. The 2-purpose nozzle cover design has good rust resistance and permeability, and has low odor. It is no problem to spray upside down.

Product Features:

• Originally imported from Japan's ICHINEN CHEMICALS company, Lubricating 303 anti-rust lubricating penetrating agent has good rust resistance and permeability.
• Lubricating 303 anti-rust lubricating penetrating agent can quickly penetrate the corroded metal surface and exert a lubricating effect on the rusted metal bottom layer.
• Lubricating 303 anti-rust lubricating penetrating agent is sprayed on rusted bolts and nuts, which can penetrate immediately and operate easily.
• Low odor type to reduce unpleasant odors at work
• Unique dual-purpose cap design, no need to replace nozzles
• Penetrating anti-rust lubricant can be sprayed upside down, making it easy to spray even in small areas

Anti-rust and lubrication performance tests under different environments: 

Product Usage:

• Anti-rust, lubrication and penetration of automobiles, motorcycles, bicycles and mechanical parts

internal volume:

• 420ml

Cutting lubricant, also known as cutting oil, cutting fluid, or lubricant, is an auxiliary effect of lubrication during the cutting process. Japan's original JIP114 super cutting lubricant is an environmentally friendly super cutting oil cutting agent, super cutting lubricating spray, chlorine-free and inactive sulfur type, suitable for various materials from light cutting to difficult cutting.

Product Features:

• Environmentally friendly cutting agent that does not contain chlorine, phosphorus, active sulfur, or heavy metals
• Suitable for a variety of materials from light cutting to difficult cutting
• Contains no chlorine, so no need to worry about dioxin production
• Based on mineral oil and using non-reactive additives, there is no need to worry about corrosion of materials or tools.
• No odor caused by sulfur additives
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

Used for tapping, thread cutting, drilling, reaming, broaching and other difficult-to-cut materials such as stainless steel, aluminum, copper and titanium alloys to lubricate during the cutting process

Performance/Characteristics:

Fusion load: 2452N

Steel plate corrosion: 1a (100℃x1hr)

Kinematic viscosity (40℃): 44.7cSt

Operating temperature range: below 100℃

capacity:

420ml