產品分類 - 法國DIAGER帝爵

The DIAGER ultra-hard straight-shank cement drill bit imported from France has a high-strength alloy tip, which is impact-resistant and wear-resistant. It can be used on gypsum board, bricks, stones, hard rocks, and cement concrete. Suitable for use with an impact electric drill, making your construction faster and more flexible.

feature of product:

• DIAGER super-hard straight shank cement drill bit/drill tail adopts high-strength alloy blade alloy head, which is impact-resistant and has low wear rate.
• U-shaped groove design for rapid chip removal
• Suitable for use with cordless impact drills for fast and flexible construction
• Suitable for working on drywall, bricks, stone, hard stone, cement concrete
• DIAGER is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Suitable for drilling materials:

Origin:

• France

French original Diager four-groove cement drill bit (SDS-plus four-groove hammer drill bit), suitable for four-groove power-free hammer drilling, shock-resistant carbide head, hard and impact-resistant. The U-shaped groove design facilitates chip evacuation and allows for fast drilling speed.

feature of product:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact-resistant, low wear rate
• Four-groove cement drill tail, U-shaped groove design facilitates chip removal and fast drilling speed
• Diager SDS-plus four-flute hammer drill bit adopts shock-resistant carbide tip and is suitable for use with the force-free 4-flute hammer drill.
• Diager is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Exclusive agent ~ DIAGER special cement drill bit imported from France for waterproofing and four-groove cement drill bit for water- stopping . It is SDS PLUS cement drill tail. The upgraded U-shaped groove is suitable for substrates with high moisture content in waterproofing and water-stopping projects, such as high-humidity sand. Stone, remove chips freely . The cutter head is made of shock-resistant carbide material, which is hard and impact-resistant. When used with a force-free 4-channel hammer drill, the effect is first-class.

Product Features:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact resistance, low wear rate, four-groove cement drill tail, upgraded U-shaped groove, suitable for bases with high moisture content in waterproofing and water-stopping projects Material, high humidity sand and gravel, free chip removal, fast drilling speed
• SDS-plus four-groove waterproof drill bit, suitable for use with the power-free 4-groove hammer drill
• DIAGER four-groove waterproof drill bit is suitable for planting reinforcement and chemical anchor bolts. It is a professional drill tail for water-stop construction.
• Diager, a drill bit originally imported from France, is the largest factory in Europe, a professional manufacturer of drill bits, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Product specifications:

DIAGER four-groove cement drill bit (water drill) imported from France, suitable for four-groove power-free hammer drilling, super-hard tungsten steel bit, hard and impact-resistant. The alloy cutter head has a positioning bump design, which can be automatically positioned. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift. The angle of the alloy tip of the four-groove cement drill tail is increased to improve the drilling ability. When used in conjunction with the force-free 4-groove hammer drill, the effect is first-class.

feature of product:

• French DIAGER four-groove power-free hammer drill cement drill bit uses super-hard tungsten steel bit as the drill bit, which is hard material, resistant to impact, has low wear rate and long service life.
• New double large row groove design, rapid mud removal and faster drilling speed
• The angle of the alloy cutter head is increased, and the top angle is designed at 160 ^° to improve drilling capabilities and efficiency.
• The alloy cutter head has positioning bumps that can be positioned automatically. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift.
• Suitable for dry walls, gradually increasing pressure relief grooves to accelerate chip removal design, fast chip removal
• The four-groove cement drill tail is suitable for use with the four-groove power-free hammer drill.
• Depending on the drilling material, the drilling speed can be 30% faster. The ideal test conditions in the laboratory test that the 8x160 drill tail can drill at least 500 holes.
• DIAGER is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Suitable for drilling materials:

Product Features:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• When drilling, it is necessary to maintain a stable pressure and frequently remove the drill bit from the drill hole to remove debris. Use a slow speed to drill harder materials to extend the life of the drill bit.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Origin:

• France

The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Unit: mm

The DIAGER five-groove six-blade cement drill tail drill bit, originally imported from France, is suitable for five-groove force-free hammer drilling. It is a five-groove steel bar drill bit that can pass through steel bars. The five-groove hammer drill bit adopts super-hard tungsten steel cutter head, which is hard and impact-resistant. The alloy cutter head has a positioning convex point design, which can automatically position , and the shoveling effect is easier to crush concrete. The hole diameter is accurate and the position is not offset. 6 main cutting edges maintain simultaneous cutting in multiple directions, increase drilling speed, and ensure stable and balanced drilling force through automatic positioning.

Product Features:

• The French DIAGER five-groove six-blade cement drill tail drill bit is a drill bit that can drill through steel bars . It uses a super-hard alloy cutter head, which is hard in material, impact-resistant, has a low wear rate and a long service life.
• New grooves strengthen the axial drilling force and enhance the earthquake resistance
• 3 alloy blades, 6 main cutting edges, automatic center positioning, accurate positioning, easier to crush concrete
• The alloy cutter head has a positioning bump design, automatic positioning, circular drilling, and position does not shift
• Special heat treatment to absorb vibration, absorb shock waves and reduce recoil
• Maintain multi-directional cutting at the same time, increase drilling speed, and ensure stable and balanced drilling force through automatic positioning
• Suitable for use with the zero-effort five-groove hammer drill
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Product Features:

Suitable for drilling materials:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification to reduce the pressure on the drill bit.
• When drilling, it is necessary to maintain a stable pressure and remove the drill bit from the hole frequently to remove debris. Use a slow speed to drill harder materials to extend the life of the drill bit.
• Different drilling speeds are used depending on the model of the electric drill. Generally speaking, regardless of the drill bit specifications, the recommended drill speed is 300-400 revolutions per minute.
• Do not use too much force on the hammer drill when using it. Just use normal force to avoid hand fatigue.

Specifications:

Unit: mm

The five-groove, ten-blade cement drill tail drill bit originally imported from France by DIAGER is a five-groove steel bar drill bit that can cut through steel bars. The five-groove hammer drill bit adopts a super-hard alloy cutter head, which can cut through steel bars. It is suitable for use with a hammer drill, and the effect is excellent.

Product Features:

• French DIAGER five-groove ten-edge cement drill tail drill bit, super-hard alloy cutter head, hard material, impact resistance, low wear rate, long life
• Five-groove hammer drill bit, powerful chiseling effect, strong penetration
• The five-groove ten-edge cement drill tail drill bit can easily drill through steel bars below 20mm
• New rotary pressure-reducing groove design facilitates chip removal, patented large double groove design, drilling speed is 25% faster
• 4 precise guides and ten main cutting edges make it easier to crush concrete
• The drill bit can drill holes of various materials, eliminating the trouble of replacing the drill tail.
• Suitable for use with the force-free five-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER five-groove ten-edge cement drill tail drill bit, indestructible even when encountering steel bars
• DIAGER drill tail imported from France

Specifications:

Unit: mm