Sort by:
234 products
234 products
- Silicon special caulking injection gun, the best tool for home DIY
- Silicone gun, made of ABS nylon, light weight, good toughness, impact resistance
- Strengthened structure, easy to operate, can be constructed by yourself
- Silicone gun, skeleton type, light and easy to carry, with needle attached
- The silicone gun pushes a steady amount, making it easy to control the injection flow and saving silicone consumption.
Product specifications:
- 310ml
- Body ABS nylon material
Introduction to use:
- Make sure the surface to be followed by caulking is dry and clean
- Cut the front end of silicone glue
- Connect the catheter head, and then cut off the catheter head at a 45° angle according to the amount of output.
- Install the silicone onto the silicone gun
- You can put paper masking tape on both sides of the construction area (or tear off the tape without leaving any adhesive residue) to prevent the silicone from sticking to other places.
- Apply silicone to the construction site
- Professional double-liquid iron glue gun made in Taiwan (professional two-liquid glue glue gun, professional two-liquid glue glue syringe, professional double-liquid glue glue gun for glue glue)
- Two-liquid type iron professional glue implanting injection gun with long service life
- The labor-saving design of the spring mechanism of the reinforcement gun makes construction effortless.
- The reinforcement syringe strengthens the structure, is easy to operate, and can be constructed by yourself
- Special caulking injection gun for tendon implantation, with stable push volume and easy control of injection flow
Product specifications:
- Injectable capacity: 235ml
- Reinforcement glue mixing ratio: 1:10
Introduction to use:
- Put the reinforcement glue (injectable chemical adhesive) into the special reinforcement glue gun, slowly pull the trigger, and discharge the thinner glue from the mouth of the platinum bag and discard it.
- Insert the spiral mixing nozzle into the bottom of the hole. If the length is not enough, use a plastic tube to extend it.
- Pull the trigger, move the trigger hole once, and move the syringe back once to discharge the air in the hole.
- In order to make the hole full of glue after the steel bar is implanted and prevent the glue from flowing out, the hole should be filled with glue up to 80%. The steel bar should be planted immediately after the hole is filled with glue.
- Professional double-liquid iron glue gun made in Taiwan (professional two-liquid glue glue gun, professional two-liquid glue glue syringe, professional double-liquid glue glue gun for glue glue)
- Two-liquid type iron professional glue implanting injection gun with long service life
- The labor-saving design of the spring mechanism of the reinforcement gun makes construction effortless.
- The reinforcement syringe strengthens the structure, is easy to operate, and can be constructed by yourself
- Special caulking injection gun for tendon implantation, with stable push volume and easy control of injection flow
Product specifications:
- Injectable capacity: 345ml
- Reinforcement glue mixing ratio: 1:10
Introduction to use:
- Put the reinforcement glue (injectable chemical adhesive) into the special reinforcement glue gun, slowly pull the trigger, and discharge the thinner glue from the mouth of the platinum bag and discard it.
- Insert the spiral mixing nozzle into the bottom of the hole. If the length is not enough, use a plastic tube to extend it.
- Pull the trigger, move the trigger hole once, and move the syringe back once to discharge the air in the hole.
- In order to make the hole full of glue after the steel bar is implanted and prevent the glue from flowing out, the hole should be filled with glue up to 80%. The steel bar should be planted immediately after the hole is filled with glue.
Use with reinforcement glue:
Made in Taiwan Mungo 4300 reinforcement glue
- Made in Taiwan, a two-liquid iron glue gun (double-liquid glue gun, two-liquid glue syringe, and a special caulking injection gun for two-liquid glue)
- Two-liquid type iron-made reinforcement glue injection gun with long service life
- The labor-saving design of the spring mechanism of the reinforcement gun makes construction effortless.
- The reinforcement syringe strengthens the structure, is easy to operate, and can be constructed by yourself
- Special caulking injection gun for tendon implantation, with stable push volume and easy control of injection flow
Product specifications:
- Injectable capacity: 600ml
- Reinforcement glue mixing ratio: 1:1
Introduction to use:
- Put the reinforcement glue (injectable chemical adhesive) into the special reinforcement glue gun, slowly pull the trigger, and discharge the thinner glue from the mouth of the platinum bag and discard it.
- Insert the spiral mixing nozzle into the bottom of the hole. If the length is not enough, use a plastic tube to extend it.
- Pull the trigger, move the trigger hole once, and move the syringe back once to discharge the air in the hole.
- In order to make the hole full of glue after the steel bar is implanted and prevent the glue from flowing out, the hole should be filled with glue up to 80%. The steel bar should be planted immediately after the hole is filled with glue.
feature of product:
- Denmark imported iron professional silicone gun (iron professional silicone gun, iron professional glue gun, iron professional glue gun)
- Suitable for silicone and reinforcement glue, it is a special caulking injection gun, professional grade
- Strengthen the structure and make it easy to operate
- Silicone gun, the push volume is stable, the injection flow is easy to control, and the silicone consumption can be saved
- Special caulking injection gun for silicone gun. It is a dual-use type and can inject silicone and tendon implant glue.
Product specifications:
- Suitable for silicone and tendon implants Capacity: 380ml
Introduction to use:
- Make sure the surface to be followed by caulking is dry and clean
- Cut the silicone glue front end
- Connect the catheter head, and then cut off the catheter head at a 45° angle according to the amount of output.
- Install the silicone onto the silicone gun
- You can put paper masking tape on both sides of the construction area (or tear off the tape without leaving any adhesive residue) to prevent the silicone from sticking to other places.
- Apply silicone to the construction site
- Made in Taiwan, aluminum alloy round tube injection gun silicone gun (round tube silicone gun, aluminum alloy wax sausage type glue gun)
- Round tube injection gun silicone gun, aluminum alloy reinforced structure, easy to operate
- Wax sausage-type glue gun, with stable pushing volume and easy control of injection flow
- Suitable for bagged caulking adhesives, such as silicone, polychloride caulking agent, epoxy resin glue and other products
Product specifications:
- Product material: high strength aluminum alloy
- Applicable capacity: 600ml or 300ml wax sausage bag
This nail gun is used for special wallboard expansion screws for plaster boards, light partitions, and calcium silicate boards. It is suitable for situations where self-tapping screws and general expansion screws are not suitable . Construction and operation are very convenient and fast, and the workpiece will not be damaged.
feature of product:
- Taiwan-made wallboard nail puller (wallboard nail puller, hollow gecko puller, hollow expansion bolt nail puller)
- Manual rivet gun, only one side of the riveting work can be completed
- Construction and operation are very convenient and fast, and will not damage the workpiece
- Suitable for construction in parts that cannot be reached by hand or jacking iron
- Progressive auxetic, labor-saving and rapid auxetic fixation
- Suitable for various auxetic nail specifications M4, M5, M6
- Need to be used in conjunction with wallboard auxetic nails
- Put the rivet into the mouth of the wallboard nail gun, hold the handle of the rivet gun, put the rivet head into the rivet hole of the board and hold it tightly against the hole.
- Press the handle firmly with your hand, and the rivet head will expand outward due to the pulling force of the rivet stem, making the materials tightly joined together.
Material:
- TPR+PP material
Applicable specifications:
- M4 (6-32mm thickness gypsum board)
- M5 (10-24mm thickness gypsum board)
- M6 (1/4"-20mm thickness gypsum board)
Origin: Taiwan
- Manual rivet gun (rivet gun/rivet gun/rivet rivet pliers/riveter), can be used without adjustment 3/32", 1/8", 5/32", 3/16" (2.4mm, 3.2 mm, 4.0mm, 4.8mm) and other 4 specifications
- Replaceable nozzle connector, super easy to replace
- Manual rivet gun, internally controlled fixation, the rivets are in the proper position and will not shift
- Manual rivet gun suitable for stainless steel, iron, aluminum rivets
- Attached spring handle, easy to use, can be operated with one hand
- Comfortable grip, easy to operate
Product specifications:
- Suitable for 3/32", 1/8", 5/32", 3/16"
product material:
- Body: Aluminum
- Movable handle: Cr-MO chromium-molybdenum alloy steel
From $629.00
Unit price perDragon Hammer, dragon-shaped forged claw hammer, with excellent shock-absorbing design, the hand will not go numb after striking, and it will not slip when held for a long time, making it easy to apply force. The curved horn + curve design reconfigures the force application gravity and lightweight design to achieve the labor-saving effect of small force application and large output. The clearly identifiable soft sheath of the hammer head and the special shock-absorbing hole design block the transmission of knocking reaction force, achieve the purpose of shock absorption, and increase the comfort of use.
feature of product:
- One-piece molding: optimal weight distribution for controlled swing, durability and long service life
- Forged dragon shape: Provides multi-grip function, comfortable and safe, and does not slip when held for a long time, making it easy to apply force.
- Shock-absorbing head handle: It has excellent shock-absorbing function, effectively slowing down the resonance effect of percussion tuning forks, reducing the vibration force of percussion, and keeping hands from going numb.
- Handle curve: improves the accuracy of tapping. There is a comfortable anti-slip grip area on the top for easy tapping without slipping.
- Curved horns: efficient nail extraction, reducing the effort required for nail extraction, saving time and effort
- High-quality materials: High-quality carbon steel casting, dual-material grip design with soft and hard features, taking into account the needs of heavy and light knocks, increasing convenience of use
Material:
● Head: carbon steel
●Handle: Steel+PP+TPR
Origin:
Taiwan
Walnut claw hammer 16oz. The claw head is designed to remove iron nails. The walnut handle is curved and thickened in the middle. It is easy to hold and apply force. It is sturdy and durable. It is a good helper for carpentry and home repairs.
feature of product:
- Sheep's horn design allows for efficient nail extraction, reducing the effort required for nail extraction, saving time and effort.
- Walnut log handle, light weight, high hardness, not easy to break, comfortable and easy to hold
Specification:
● 16oz
● Total length: 329mm
Material:
● Head: carbon steel
●Handle: walnut
Origin:
Taiwan
6-piece woodworking carving knife set + Cut A5 anti-cut gloves (WD-CK00-06-CutA5)
$600.00
Unit price per6-piece woodworking carving knife set + Cut A5 anti-cut gloves (WD-CK00-06-CutA5)
$600.00
Unit price per
Exquisite carving craftsmanship requires the right tools, and in our carving knife set, each knife is carefully designed to enable you to easily carve out your own style and ideas, providing you with a partner to realize your creative dreams.
During the creative process, it is crucial to protect yourself, and Cut A5 anti-cut gloves provide you with safe protection so you can fully concentrate on your creation. Cut A5 anti-cut gloves not only provide excellent cut protection, but also have sensitive touch sensing functions and excellent resistance to cutting, tearing and abrasion.
▌Made in Taiwan 6-piece woodworking carving knife set▌
● The blade is sharp and smooth
● Japanese steel SK5 blade, strong and durable
● Suitable for sculpture, model making, handicrafts, and art courses
● Comes with whetstone (whetstone)
=======================
▌The best-selling Cut A5 anti-cut and anti-slip touch gloves in Japan and South Korea ANSI A5 grade▌
● Metal woven anti-cut gloves, more flexible hand protection ● Light and thin, sensitive touch sensor function, you can also slide your mobile phone while working ● Durable, high density, will not be punctured immediately, good protection ● Excellent cut resistance , Tear resistance and wear resistance
Product specifications:
4 types of cutters including oblique cutter, flat cutter, round cutter and V-shaped cutter
Material:
Blade: Japanese steel SK5
Handle: iron, wood
Origin:
Taiwan
ANSI A5 level and the highest level of EN388 cut resistance, Cut A5 anti-cut and anti-slip touch gloves , are like the rare treasure silk armor in martial arts novels, which cannot be damaged by swords and protect the hands from cuts.
The best- selling Cut A5 anti-cut and anti-slip touch gloves in Japan and South Korea comply with the highest protection level of European EN388 industrial gloves and ANSI A5 anti-cut gloves. They have anti-slip, wear-resistant and touch functions. They are the best for hand protection in gardening, warehousing and transportation. partner.
feature of product:
- Metal woven anti-cut gloves, lighter and thinner than the first generation, with more flexible hand protection
- Sensitive touch sensor function, you can slide your phone while working without taking off your gloves
- Resistant to water washing and oil stains, not easy to wrinkle or shrink after washing
- Durable, high density, will not be punctured immediately, good protection
- Comfortable and breathable, comfortable to wear
- Excellent resistance to cutting, tearing and abrasion
product material:
- Metal Fabric
- PolyethylenePolyethylene
- NylonNylon
- Nitrile rubber
Origin:
South Korea
- The blade is sharp and smooth
-
Japanese steel SK5 blade
- The ring is not easy to fall off
- No rust , sturdy and durable
- Suitable for engraving, trimming, model making, handicrafts, student art courses, DIY...etc.
- With whetstone (whetstone)
Product specifications:
4 types of cutters including oblique cutter, flat cutter, round cutter and V-shaped cutter
Material:
Blade: Japanese steel SK5
Handle: iron, wood
Origin:
Taiwan
- The red hot steel flat is ready for chisel cutting and repair. The blade is sharp and durable, and the carving is smooth.
- The chisel body is precisely connected to the handle, which is not easy to fall off and extends the use time.
- Comfortable to hold and more convenient to use
- Suitable for use with hammer
Material:
carbon steel, wood, iron
Origin:
Taiwan
- The blade is sharp and durable, and the carving is smooth
- The chisel body is precisely connected to the handle, which is not easy to fall off and extends the use time.
- Comfortable to hold and more convenient to use
- Suitable for use with hammer
Material:
carbon steel, wood, iron
Origin:
Taiwan
From $400.00
Unit price perProduct Features:
- Chisel and chisel, the blade is sharp and durable, and the carving is smooth
- The chisel body and the handle are precisely connected, not easy to fall off, and the use time is extended
- The chisel handle is round and thick, can be hammered or tapped, multi-purpose use
- White Fired Steel
- Comfortable grip, more convenient to use
- Suitable for hammer striking work
Material:
Carbon steel, wood, iron
Origin:
Taiwan
Woodworking DIY entry model
A small woodworking planer, also known as a planer, a planer, or a planer, is suitable for detailed work and is specially used to repair small parts of the plane. Made of natural wood, it has a compact appearance and a light texture. It is suitable for repairing small areas where large planers are difficult to handle.
feature of product:
- Suitable for detailed work
- Compact appearance and easy to carry
- Lightweight, reducing workload
- Medium carbon steel knife, wear-resistant and easy to use
- Made in Taiwan, exquisitely handcrafted
Product Usage:
Used for straightening, thinning, polishing, smoothing surfaces and detail work
Material:
Blade: carbon steel
Planing table: wood
Origin:
Taiwan
Woodworking DIY entry model
The woodworking planer knife, also known as the smooth planer, is used to plan the surface of the board to make it fine and shiny. Suitable for planing and smoothing large areas of wood surfaces. Equipped with a grip pole to make it easier to apply force during work.
feature of product:
- Suitable for planing wood above 1M
- Grip design makes applying force easier
- Medium carbon steel knife, wear-resistant and easy to use
- Made in Taiwan, exquisitely handcrafted
Product Usage:
Used for planing, thinning, polishing, smoothing large-area wood surfaces, etc., suitable for wood above 1M
Material:
Blade: carbon steel
Planing table: wood
Origin:
Taiwan
Woodworking DIY entry model
Woodworking long planes are commonly used to process the edges of panels and the finishing of longer beams to plan wooden boards to make the splicing between wooden boards tighter.
Equipped with a movable handle (movable hand), making it easier to apply force during work.
feature of product:
- Suitable for planing long wooden objects
- Movable handle design makes it easier to apply force and more convenient to store
- Medium carbon steel knife, wear-resistant and easy to use
- Made in Taiwan, exquisitely handcrafted
Product Usage:
Used for straightening, thinning, polishing, smoothing, etc. of long wooden objects
Material:
Blade: carbon steel
Planing table: wood
Origin:
Taiwan
The 2-in-1 nail puller and pry plate set is a nail puller and a pry plate. It is made of medium carbon steel and has two uses. It is durable and more convenient. It is suitable for carpentry and car interior door panel disassembly and assembly.
Woodworking nail puller function : one side curved design, can remove nails and be used as a crowbar
Pry board function : The flattened V-shaped end on the other side can cut into narrow angles and pry open objects.
feature of product:
- Made of medium carbon steel, sturdy and durable
- Black paint treatment, not easy to rust
- The head of the nail puller has a curved horn design, which is labor-saving, quick and convenient to use.
- The flat V-shaped design of the head of the pry plate can cut into narrow angles and pry open car interior door panels and other objects.
Material:
Carbon steel
Origin:
Taiwan
In the past, when driving nails, I held them with my hands and was always cautious, fearing that I would hit my hands. At the end of the hammering, I would hit the surface material as well, causing marks.
With the new nail holder, you don’t have to worry about hammering nails. It can fix 5 sizes of nails, including 1.5mm-2.5mm. You don’t have to worry about hammering nails anymore. When you want to hammer the nail tightly, use the other side to tap the side nail in a conical shape. It does not damage the surface material and can easily nail the nails.
feature of product:
- Nails can be easily attached
- Protect your fingers from knocking
- When you want to hammer a nail tight, use the hammering side.
- Only 10cm, can be carried anywhere
Material:
PP plastic
5.5M鋼捲尺附強磁尺頭|文公/魯班高挺立捲尺,雙煞車、安全緩衝、雙面刻度清晰
5.5M文公/魯班尺,體驗尺頭強磁設計的便利,一吸即量、穩固不滑動,輕鬆吸附鋼材等金屬表面。雙煞車鎖定與暫停裝置,有效固定尺帶、防止意外回縮。搭配高挺立雙面霧面尺帶,刻度清晰、防反光,精準測量不卡尺。內建緩衝裝置降低衝擊,外殼採用ABS複合材質搭配鐵芯,耐用耐摔。附腰掛與吊繩設計,攜帶方便,適合工地與日常使用。
產品特色:
■ 尺頭強磁設計:一吸即量,穩固不滑動,吸附金屬表面測量更輕鬆省力。
■ 煞車功能:雙煞車鎖定與暫停裝置,固定尺帶、防止回縮更安全。
■ 雙面尺帶:霧面防反光設計,刻度清晰,讀數快速不費力。
■ 緩衝裝置:內建減震系統,降低尺帶回收時的衝擊,保護使用者與工具。
■ 挺立度佳:高挺立尺帶,筆直不彎曲,提升測量穩定度與精準度。
■ 複合材質:ABS外殼結合強固鐵芯,堅固耐用,適合長時間操作。
■ 攜帶方便:附腰掛鉤與吊繩,隨身攜帶、隨手使用皆方便。
Designed for style-conscious designers and lovers of minimal aesthetics, this 5M steel tape measure combines a sleek form with timeless color palettes. Whether it's the clean sophistication of pure white or the energetic touch of orange-white, it delivers both function and style in one elegant tool.
Compact and lightweight, it's easy to carry and operate single-handedly. The smooth brake-lock mechanism ensures the tape stays in place during measurements—preventing accidental retraction and enhancing accuracy and control. From interior layout planning to industrial use, this tape measure is the perfect choice for professionals and home DIYers alike who value both performance and aesthetics.
Product Features:
■ Brake Lock Mechanism – Secures the tape in place to prevent accidental retraction.
■ Matte-Finish Tape – Reduces glare for clear visibility and easy reading of measurements.
■ Excellent Standout – High-rigidity tape maintains straightness and stability during use.
■ Durable Construction – ABS outer shell offers superior impact resistance.
■ Anti-Drop Design – Comes with a wrist strap for safety and convenient portability.
■ Classic Colors – Available in two styles: Minimalist White (cm only) / Energetic Orange (cm & inch dual scale)
Specifications:
■ Materials:Case – ABS / Tape – Steel
■ Dimensions:70 × 60 × 35 mm
■ Weight:200g
最新一代微鋸齒弧型刀刃,剪切力優異、省力銳利,無論是剪筋膜、皮革或金屬薄片都能輕鬆勝任。採用日本進口食品級不鏽鋼,適用於廚房、露營、居家、辦公等多用途剪切需求。附專屬護套,方便收納攜帶。
產品特色:
■ 日本進口420J2不鏽鋼:高耐磨、防鏽、抗腐蝕,HRC53±2硬度
■ 鋸齒弧形刀刃設計:防滑不偏移,剪切手感更銳利、省力
■ 鋼絲剪線口:可剪鋁線、銅線、鐵絲
■ 背部開箱刀設計:免開剪刀,輕鬆拆包裹
■ 鋸齒夾功能:可開瓶蓋、破堅果殼
■ 人體工學手把:雙材質射出成型,握感舒適穩定
■ 專屬護套設計:刀刃防護,攜帶安全便利
■ 用途廣泛:食材處理、金屬薄片、皮革、紙箱、塑膠包裝皆適用
產品規格:
■ 材質:刀刃-日本鋼材420J2 把手-PP+TPR
■ 尺寸:剪刀全長-206mm / 刃長-100mm / 護套長-100mm
專為電工設計的專業多功能剪刀,日本不鏽鋼打造,剪切力強,能應對80mm²電纜。附專屬護套,方便腰掛攜帶。集剪線、壓接、剝線等多種功能於一身,是現場作業的理想工具!
產品特色:
■ 日本進口不鏽鋼:採用高級4034不鏽鋼,硬度高達HRC58±2,耐磨防鏽
■ 人體工學手柄:雙材質PP+TPR握把,舒適好握,大手也好用,便於施力。
■ 鋒利微鋸齒刀面:切割時不滑移,剪口平整利落。
■ 切割槽設計:專剪大電纜,可達80mm²。
■ 壓接與剝線功能:具2種壓接設計及3種剝線孔(1.5 / 2.5 / 4mm²)。
■ 附專屬刀鞘:尼龍刀鞘背部皮帶扣設計,便於腰掛攜帶。
■ 多功能應用:可剪電線、電纜、銅鋁線,也能刮除線上髒污。
產品規格:
■ 材質:刀刃-4034日本不鏽鋼 把手-PP+TPR
■ 尺寸:剪刀全長-170mm / 刃長-50mm / 護套長-134mm
Showing 234/234
