Sort by:
13 products
13 products
產品特色:
- 精準光學物距比: 12:1 黃金比例(D:S),距離目標 36 公分即可精準測量直徑 3 公分的範圍。
- 專業可調發射率: 具備 0.1 ~ 1.0 發射率調整功能(預設 0.95),可針對不同材質(如木材、水、混凝土)精準校正,告別測量誤差。
- 雷射輔助瞄準: 內建雷射光點(可自由開關),幫助快速且準確地鎖定測量位置。
- 直覺式一鍵測量: 按下板機即可開機測量,放開後螢幕自動鎖定最後數值(HOLD 功能),方便讀取記錄。
- 智慧節能設計: 閒置超過 15 秒即自動關機,延長電池壽命。
- 雙溫標切換: 支援攝氏 (°C) 與華氏 (°F) 單位一鍵切換,滿足不同工作需求。
產品規格:
- 測量範圍: -50°C ~ 550°C
- 測量精準度:≥ 100°C 時,誤差為 ±2% / ≤ 100°C 時,誤差為 ±2°C
- 距離與測量點比 (D:S): 12:1
- 放射率 (Emissivity): 0.1 ~ 1.0 可調(預設值為 0.95)
- 電源供應: AAA (4號) 電池 x 2 顆
警告:
- 雷射安全: 本產品內建 Class II 雷射。嚴禁將雷射光直射眼睛,或透過任何反射面(如鏡子、光滑金屬)照射眼睛,以免造成視力損害。
- 嚴禁浸水: 機身僅可用微濕的布擦拭,絕對不可以將整台測溫槍浸泡在水中。
- 鏡頭清潔禁忌: 感測鏡頭極為精密,只能使用吹塵球吹去灰塵,或用微濕的棉花球輕輕擦拭,嚴禁使用任何化學溶劑。
備註:
- 金屬測量盲區: 光亮的金屬表面(如鋁、銅、不鏽鋼)反光率高,會影響紅外線測量準確性。
- 無法穿透玻璃: 紅外線無法穿透透明物體。若隔著玻璃測量,測得的數值將是「玻璃表面」的溫度,而非對面的物體。
- 環境干擾因素: 測量環境若有濃密的蒸氣、灰塵或煙霧,會遮蔽紅外線傳導,進而影響測量的準確度,請盡量避開此類環境。
- 低電量提示: 當螢幕顯示電量符號時,代表電池即將耗盡,請提前備妥並更換電池。
用更小的體積,完成更大的清潔效率!1400W手持高壓清洗機 強勁輸出搭配最高 105 Bar 高壓水柱,油汙、泥土、青苔、髒污瞬間沖散,讓清潔不再費力。 輕而小巧,收納省空間,對空間有限的家庭或戶外清洗的必備利器。
產品特色
- 強力水壓:額定 70 Bar、最高 105 Bar,快速沖刷頑強汙垢。
- 大流量清潔:每分鐘 6.5L 出水量,提升沖洗效率。
- 輕巧不笨重:主機僅 4KG(不含配件),單手久握也不疲勞,體積小,方便收納。
- 五公尺長度配置:電源線 5M、高壓水管 5M,移動自由、清洗範圍更廣。
- 耐用碳刷馬達:1400W 強勁輸出,動力穩定、效率高。
- 安全防水設計:IPX5 防護等級,戶外使用更安心。
- 耐候材質製造:PP/PVC 材質堅固耐用,不易老化。
適用場景超廣
車輛沖洗、庭院地面、外牆青苔、機車砂塵、工具設備、陽台排水溝,居家戶外皆適用,快速恢復乾淨清爽!
產品規格
- 材質:PP / PVC
- 工作電壓:110V / 60Hz
- 額定壓力:70 Bar
- 最大壓力:105 Bar
- 最大出水量:6.5 L/min
- 輸出功率:1400W
- 馬達型式:碳刷馬達
- 電源線長度:5M
- 高壓水管長度:5M
- 防護等級:IPX5
- 本體重量:4KG(不含配件)
請注意:請依使用須知操作,如因操作錯誤造成的產品故障,需負擔相關的檢修費
- Portable trolley tool bag, made of 1680D Oxford fabric, providing higher load-bearing capacity
- After load-bearing test, it can bear up to 25 kilograms.
- Large-capacity multi-compartment storage space to meet your storage needs
- Equipped with wear-resistant pulleys, anti-slip and shock-proof, greatly upgraded mobility
- Reinforced anti-wear bottom plate, not easy to be damaged on rough roads
- The internal copper product design of the sprinkler head enhances the service life
- Adjustable rotating head with 9-stage water discharge mode, wide range of use
- Labor-saving buckle structure, when the switch is buckled down, water can be discharged continuously to save labor.
- The handle is designed with thermoplastic rubber, which is comfortable and light to hold.
- With quick connector
Material:
Body: ABS+thermoplastic rubber
net weight:
200g
Origin:
Taiwan
高校、精準施工!高扭力起子頭結合磁圈設計與耐衝擊結構,讓您在鎖付螺絲時更穩定、更省力。無論是專業工地還是日常維修,大幅提升工作效率與工具壽命。
產品特性:
- 雙頭起子設計:可折磁圈,兩端皆可使用
- 中段硬度加強:耐用度高,壽命更長
- 特殊先端設計:提升鎖付精準度,搭配磁圈防止打滑
- 磁圈特色:防止螺絲掉落,安裝後磁力倍增
- 減震耐衝擊:起子搭配環狀扭力環,不易斷裂
- 安裝拆卸便利:可快速移除或安裝磁圈
產品規格:
- 盒裝:80 x 60 x 30mm / 140g(10入)
- 起子頭規格:PH2 x 65mm
- 硬度:HRC60~62
- 材質:S2
5W head-mounted LED headlight, 3-stage strong zoom LED headlight, lighting distance exceeds 200 meters. Rechargeable adjustable-angle headlight, the headlight has adjustable angle lighting to meet your different needs; you can freely change the direction of the light, and the lighting angle is wider in the dark. Long press the power switch for SOS warning function. Comes with 2 18650 lithium batteries and 4 hat brim hooks, suitable for camping, mining, pipeline inspection, fishing, mountain climbing, cycling or outdoor activities.
feature of product:
- 5W 3-stage strong zoom LED headlight, 3-stage lighting design, extremely bright → bright → LED light flashes, 5W lighting is super bright
- Long press the power switch, SOS warning function
- 3-stage strong zoom LED headlight, lighting distance exceeds 200 meters
- The head-mounted LED headlight comes with 2 18650 lithium batteries
- Rechargeable adjustable-angle headlight, the headlight has adjustable angle lighting to meet your different needs; you can freely change the direction of the light, and the lighting angle is wider in the dark.
- Head-mounted LED headlight, highly elastic headband, comfortable and suitable for any head shape
- Comes with 4 hat brim hooks to keep the headlight fixed and not slipping
- Suitable for camping, mining, pipeline inspection, fishing, mountain climbing, cycling or outdoor activities, etc.
Excellent design ~ 3-in-1 LED rechargeable flashlight assembly, compact body, multi-functional lamp head
An amazing life helper ~ 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light, with a maximum brightness of up to 1000 lumens, and equipped with 3 quick connection systems, allowing you to easily replace the lamp head for easy use Choose between flashlights, long foldable work lights and snake tube lights.
The 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light uses a 4000mAh lithium battery and supports USB-C charging, so you don’t have to worry about battery problems. Whether it is car repair, home lighting, camping or outdoor activities, this flashlight can perfectly meet the needs of various occasions.
Whether you need a flashlight with excellent lighting effects, a long foldable work light that can provide a wide range of lighting, or even a flexible snake light, this 3-in-1 multi-functional LED rechargeable flashlight set + folding work light +Snake tube lights can meet your needs.
This 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light has a unique design that combines lightweight portability and versatility. Whether indoors or outdoors, you can easily meet the lighting needs of various occasions. Let this kit become an indispensable assistant in your life, bringing you convenience and safety.
feature of product:
Aluminum alloy + strong magnetic base
The lightweight aerospace aluminum alloy body is equipped with one-touch buttons for simple and easy control. The strong magnetic design of the base of the fuselage makes it easy to adsorb on any metal surface.
Reversible and foldable work light
The COB lamp panel has a double-joint design and can be folded and flipped 360°. The lamp head can be flexibly rotated 360° to achieve multi-angle lighting .
zoom flashlight
Supports variable zoom function, the maximum brightness can reach 1000 lumens. You can easily adjust from a wide-angle floodlight to a narrow-focus beam for wide coverage or focused illumination of a specific area.
Double magnetic snake tube lamp
It adopts a flexible gooseneck design that can be bent around obstacles to facilitate access to narrow spaces for lighting. The head has a magnetic suction function, which makes it easy to absorb and pick up fallen small parts in narrow places.
Product Features:
- 3 quick connectors provide different adjustable LED light outputs
- The strong magnetic design of the base of the fuselage makes it easy to adsorb on any metal surface.
- Aerospace aluminum alloy body allows it to withstand wear and tear
- Up to 1000 lumens maximum brightness
- The lamp head of the snake tube lamp is magnetic, which can absorb and pick up small fallen parts in small spaces.
- Using 21700 battery 4000Ah lithium battery, Type-C charging mode
Instructions:
1. In the off state, long press for 2 seconds to turn on, short press to switch between high, medium and low modes, and long press for 2 seconds to turn off.
2. In any state, press twice to enter flashing mode, short press to exit.
3. In any state, press 3 times to enter SOS mode, press briefly to exit.
4. In the off state, press 5 times in a row to enter the tactical mode. Press and hold to light up. If you don’t press it, it will not light up. Press 5 times in a row to exit the tactical mode.
專為電工設計的專業多功能剪刀,日本不鏽鋼打造,剪切力強,能應對80mm²電纜。附專屬護套,方便腰掛攜帶。集剪線、壓接、剝線等多種功能於一身,是現場作業的理想工具!
產品特色:
■ 日本進口不鏽鋼:採用高級4034不鏽鋼,硬度高達HRC58±2,耐磨防鏽
■ 人體工學手柄:雙材質PP+TPR握把,舒適好握,大手也好用,便於施力。
■ 鋒利微鋸齒刀面:切割時不滑移,剪口平整利落。
■ 切割槽設計:專剪大電纜,可達80mm²。
■ 壓接與剝線功能:具2種壓接設計及3種剝線孔(1.5 / 2.5 / 4mm²)。
■ 附專屬刀鞘:尼龍刀鞘背部皮帶扣設計,便於腰掛攜帶。
■ 多功能應用:可剪電線、電纜、銅鋁線,也能刮除線上髒污。
產品規格:
■ 材質:刀刃-4034日本不鏽鋼 把手-PP+TPR
■ 尺寸:剪刀全長-170mm / 刃長-50mm / 護套長-134mm
50M Laser Distance Meter Infrared Electronic Scale Distance Meter (BI-LDM-050)
NT$1,350
Unit price per50M Laser Distance Meter Infrared Electronic Scale Distance Meter (BI-LDM-050)
NT$1,350
Unit price per- 50M laser rangefinder, accurate measurement, wide range of applications
- Pocket size, easy to carry
- The laser rangefinder has an angle measurement function. When performing a groove measurement, just select a point to measure.
- Automatic power-off function, power display
- Laser distance meter can measure length, area, volume, hypotenuse, height, and Pythagorean measurement
- Infrared electronic ruler distance meter, switchable units: meters, feet, inches, bench feet, square meters
- 10 groups of memory storage
- Soft buttons, anti-slip and easy to hold
- IP54 dustproof and water-proof rating
Product specifications:
| Function | illustrate |
| Measuring range | 0.05-50M |
| Measurement accuracy | ±2mm |
| unit of measurement | m, in, ft, ft/in, feet, pings |
| Laser wavelength | 620-690nm |
| Laser level | second level |
| Laser power | ≤1mW |
| temperature range | 0℃~40℃ |
| Dust and water resistance | IP54 |
| size | 119x49.5x22mm |
| weight | 68g |
最新一代微鋸齒弧型刀刃,剪切力優異、省力銳利,無論是剪筋膜、皮革或金屬薄片都能輕鬆勝任。採用日本進口食品級不鏽鋼,適用於廚房、露營、居家、辦公等多用途剪切需求。附專屬護套,方便收納攜帶。
產品特色:
■ 日本進口420J2不鏽鋼:高耐磨、防鏽、抗腐蝕,HRC53±2硬度
■ 鋸齒弧形刀刃設計:防滑不偏移,剪切手感更銳利、省力
■ 鋼絲剪線口:可剪鋁線、銅線、鐵絲
■ 背部開箱刀設計:免開剪刀,輕鬆拆包裹
■ 鋸齒夾功能:可開瓶蓋、破堅果殼
■ 人體工學手把:雙材質射出成型,握感舒適穩定
■ 專屬護套設計:刀刃防護,攜帶安全便利
■ 用途廣泛:食材處理、金屬薄片、皮革、紙箱、塑膠包裝皆適用
產品規格:
■ 材質:刀刃-日本鋼材420J2 把手-PP+TPR
■ 尺寸:剪刀全長-206mm / 刃長-100mm / 護套長-100mm
Designed for style-conscious designers and lovers of minimal aesthetics, this 5M steel tape measure combines a sleek form with timeless color palettes. Whether it's the clean sophistication of pure white or the energetic touch of orange-white, it delivers both function and style in one elegant tool.
Compact and lightweight, it's easy to carry and operate single-handedly. The smooth brake-lock mechanism ensures the tape stays in place during measurements—preventing accidental retraction and enhancing accuracy and control. From interior layout planning to industrial use, this tape measure is the perfect choice for professionals and home DIYers alike who value both performance and aesthetics.
Product Features:
■ Brake Lock Mechanism – Secures the tape in place to prevent accidental retraction.
■ Matte-Finish Tape – Reduces glare for clear visibility and easy reading of measurements.
■ Excellent Standout – High-rigidity tape maintains straightness and stability during use.
■ Durable Construction – ABS outer shell offers superior impact resistance.
■ Anti-Drop Design – Comes with a wrist strap for safety and convenient portability.
■ Classic Colors – Available in two styles: Minimalist White (cm only) / Energetic Orange (cm & inch dual scale)
Specifications:
■ Materials:Case – ABS / Tape – Steel
■ Dimensions:70 × 60 × 35 mm
■ Weight:200g
The 3/4" tapered burr scraper is specially designed for trimming copper tubes, aluminum tubes, and thin iron tubes. It has a hexagonal shaft design and can be directly operated with an electric drill or screwdriver, which is efficient and convenient. The pointed conical blade is sharp and durable, meeting industrial-grade cutting requirements and quickly removing burrs. The processed surface is smooth and delicate, reducing the roughness and ensuring the stable quality of the finished product. It is suitable for all kinds of trimming operations and improves processing efficiency.
Product Features:
✔ Applicable to 2-6mm copper tubes, aluminum tubes, and thin iron tubes (1-19mm)
✔ Hexagonal shaft design, can be directly used with electric drill to improve work efficiency ✔ Conical blade, in line with industrial-grade cutting requirements, cutting precision and sharpness ✔ High surface smoothness, reducing burrs and ensuring the quality of finished products ✔ Double groove hexagonal shaft design to ensure more stable fixation and stability
Product specifications: 3/4" (1~19mm)
Product material: HSS high speed steel
Origin: Taiwan
The 3rd generation upgraded aluminum alloy ratchet manual and electric dual-purpose copper tube expander combines manual and electric functions to provide an efficient and labor-saving tube expanding experience. Made of lightweight and durable aluminum alloy, it is suitable for all types of copper tube expansion operations and is an ideal choice for professional workers. Its unique design includes a magnet and a physical tenon structure, with accurate double-sided positioning to ensure stable operation. The spring design allows for quick replacement of the clamping row, while the automatic tripping mechanism can produce an idling effect to prevent scratching of the tube, making the bell mouth smoother and more beautiful.
Product Features:
- Lightweight aluminum alloy body, with special eccentric key design, to achieve labor-saving, fast and accurate 45° bell-mouth expansion effect
- Equipped with an automatic tripping mechanism, the spring will automatically pop open, producing an idling effect, effectively preventing scratches on the tube and making the bell mouth smoother and more beautiful
- Applicable specifications: 1/4", 3/8", 1/2", 5/8", 3/4"
- Made of aerospace grade aluminum alloy, durable and lightweight, suitable for various professional needs
