The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Unit: mm

• Ultra-thin AC hook meter (current hook meter/hook meter/hook meter), using the average rectification method to measure the fundamental waveform component
• -25°C ~ 60°C operating temperature range
• Connect the CT6280 sensitive sensor to measure up to 4199A thick or paired wires
• 1000A average value, fixture diameter: 33mm
• Weighing 100g, the body is only 16mm thick, light and easy to carry
• Lightweight and thin body design, smoother operation in narrow spaces
• HIOKI Japan original company goods

Related components:
Main unit x 1, test lead L9208 × 1, button-type lithium battery (CR2032) × 1, instruction manual × 1

• 50M laser rangefinder, accurate measurement, wide range of applications
• Pocket size, easy to carry
• The laser rangefinder has an angle measurement function. When performing a groove measurement, just select a point to measure.
• Automatic power-off function, power display
• Laser distance meter can measure length, area, volume, hypotenuse, height, and Pythagorean measurement
• Infrared electronic ruler distance meter, switchable units: meters, feet, inches, bench feet, square meters
• 10 groups of memory storage
• Soft buttons, anti-slip and easy to hold
• IP54 dustproof and water-proof rating

Product specifications:

2-in-1 wall detector + laser rangefinder, dual-use in one ~

Wall detector avoids wires and steel bars, so you don’t have to worry about drilling the wrong holes during decoration

Laser rangefinder function makes measuring dimensions more convenient

Warranty period: 6 months

綠光4D 16線雷射水平儀

取代傳統墨線，採用高亮度綠光雷射與智慧型自動調平技術，大幅提升工作效率，是安裝施工的理想利器，適用於磁磚鋪設、木作裝潢、電工佈線、門窗安裝等多種場景。

產品特色：

•  4D 16線高精準標線：水平/垂直全覆蓋，定位快速精準
•  綠光雷射：亮度高、射程遠，室內外均清晰可見
•  智慧自動調平：≤3°自動調整，超出範圍持續閃爍並嗶嗶聲提醒
•  多種安裝方式：支援腳架、升降台、牆貼等
•  一鍵鎖定斜線模式：支援斜面施工需求
•  亮度調節+遠端遙控：依環境調整光線，操作更便利
•  清晰4鍵介面：水平、垂直、斜線、亮度獨立控制，直覺易用
•  堅固便攜：附收納盒，攜帶安裝兩相宜
•  適用多種工程場域：地磚鋪設、室內裝修、電力/木工安裝等

警告：使用時，雷射光請勿直接對準眼睛或從反射面間接照射，否則可能會對眼睛造成永久傷害

取代傳統墨線的測量利器。結合高亮度綠光、LED 雙氣泡與鋁合金機身，為泥作、木工與居家修繕提供精準定位。

產品特色

• 高亮綠光十字線： 搭載高能見度綠光模組，提供 ±2mm / 5M 精準度，穿透力勝過紅光，大幅提升定位效率。

• 鋁合金防撞機身： 全機採高強度鋁合金搭配專屬灰橘配色，捨棄易損塑料，兼具防撞耐磨與專業質感。

• LED 發光雙氣泡： 內建水平/垂直氣泡儀，配備 LED 背光設計，在昏暗工地或夾層施工依然清晰判讀。

• 強磁吸附與靈活擴充： 背面大面積磁碟可快速吸附於輕鋼架或金屬表面；底部配備螺紋孔支援標準腳架，徹底解放雙手。

• 彈性規格任選： 依作業需求，自由選擇「單機款」或「附腳架款」。

產品規格

• 雷射光源： 綠光十字線 (Output <1mW)

• 機身材質： 鋁合金

• 機身配色： 科技灰 + 百利世橘

• 精準度： ±2mm / 5M

• 水平儀器： 水平氣泡 + 垂直氣泡 (具備 LED 發光功能)

• 固定方式： 背面大面積磁碟 / 底部腳架螺紋孔

• 電池規格： 2 顆 AAA (4號) 電池 (※本商品不含電池，需自備)

規格

• 【單機款】： 綠光十字線雷射水平儀主機 x 1

• 【附腳架款】： 綠光十字線雷射水平儀主機 x 1、專屬腳架 x 1

安全警告與售後保固

•  安全警告： 本產品為高亮度專業雷射儀器，請勿將雷射光直接對準眼睛，或從反射面間接照射，以防視力受損。

•  安心保固： 提供原廠 6 個月保固服務 (僅限非人為損壞之內部機件故障)。

*可提供 JIS認證書 及 性能測試成績書

高速鎖定機構：0.24 秒守住安全

• 當安全繩在墜落瞬間被急速拉出時，內部捲軸能於 0.24 秒內瞬間鎖定，即時阻止繩索繼續滑動，防止墜落發生。
• 符合日本 JIS T8165:2018 標準，並以 130kg 墜落體測試驗證通過。

 吸震緩衝設計，減輕衝擊負荷

搭載 緊湊輕量型減震器（Shock Absorber），能在承受衝擊時有效分散力道，降低最大衝擊荷重與人體受力波動，讓防墜過程更平穩、安全。

產品特性：

• 承重高達 130kg
• 0.24 秒高速鎖定
• 專利吸震結構
• 超輕量纖維繩帶
• JIS 認證安全測試

產品規格：

D 型鋁合金連接器：

• 使用 輕質鋁合金登山扣 (ASC 型)

• 自動閉合式安全環，提升連接穩定性

• 旋轉鎖扣設計，靈活操作不卡

吸震帶：

• 外層材質：Type 1 尼龍保護外罩

• 背帶寬度：18.5 mm

• 背帶厚度：1.35 mm

• 核心材質：超高分子量聚乙烯纖維

• 使用長度：約 1,550 mm / 收縮後長度：約 660 mm

• 緩衝包位移量：455 mm (優於標準要求的 1200mm 以下)

• Portable trolley tool bag, made of 1680D Oxford fabric, providing higher load-bearing capacity
• After load-bearing test, it can bear up to 25 kilograms.
• Large-capacity multi-compartment storage space to meet your storage needs
• Equipped with wear-resistant pulleys, anti-slip and shock-proof, greatly upgraded mobility
• Reinforced anti-wear bottom plate, not easy to be damaged on rough roads