2-in-1 wall detector + laser rangefinder, dual-use in one ~

Wall detector avoids wires and steel bars, so you don’t have to worry about drilling the wrong holes during decoration

Laser rangefinder function makes measuring dimensions more convenient

Warranty period: 6 months

綠光4D 16線雷射水平儀

取代傳統墨線，採用高亮度綠光雷射與智慧型自動調平技術，大幅提升工作效率，是安裝施工的理想利器，適用於磁磚鋪設、木作裝潢、電工佈線、門窗安裝等多種場景。

產品特色：

•  4D 16線高精準標線：水平/垂直全覆蓋，定位快速精準
•  綠光雷射：亮度高、射程遠，室內外均清晰可見
•  智慧自動調平：≤3°自動調整，超出範圍持續閃爍並嗶嗶聲提醒
•  多種安裝方式：支援腳架、升降台、牆貼等
•  一鍵鎖定斜線模式：支援斜面施工需求
•  亮度調節+遠端遙控：依環境調整光線，操作更便利
•  清晰4鍵介面：水平、垂直、斜線、亮度獨立控制，直覺易用
•  堅固便攜：附收納盒，攜帶安裝兩相宜
•  適用多種工程場域：地磚鋪設、室內裝修、電力/木工安裝等

警告：使用時，雷射光請勿直接對準眼睛或從反射面間接照射，否則可能會對眼睛造成永久傷害

• Four-stage voltage detectors made in Taiwan (four-stage voltage and current detectors, four-stage AC and DC voltage detectors, four-stage voltage testers, four-stage voltage detectors, four-stage electroscopes)
• The four-stage voltage detector can determine the voltage in the AC/DC circuit and is a common and convenient tool for checking whether low-voltage electrical equipment is leaking.
• Four-stage voltage detection instrument, each stage uses independent resistors, suitable for various regions
• When detecting AC alternating current, the neon tubes at the two electrode ends will light up.
• When detecting DC current, only one electrode of the neon tube will light up.
• When testing, one end needs to be connected to the live wire (positive pole) of the power socket, and the other end needs to be connected to the ground wire (negative pole), then the neon tube will light up.
• No batteries required
• The voltage tester is suitable for AC alternating current testing and DC direct current, and is suitable for home use.
• Voltage measurement range: 110V~460V
• Palm size, lightweight, easy to carry, the best tool for DIY and professional instruction
• Suitable for testing power sockets, switches, short circuit detection, fuses, two electrodes, main power supplies, and other equipment

FLIR E5 Pro is a professional series of infrared thermal imaging cameras equipped with FLIR Ignite cloud, with an infrared thermal imaging resolution of 160 x 120 pixels and an image refresh rate of 9 Hz.

The FLIR E5 Pro thermal camera works more efficiently than ever in building surveys, HVAC, automotive, and general electrical and mechanical inspections. Find and diagnose problems quickly with 160×120 thermal imaging resolution (19,200 pixels) and vivid thermal images powered by FLIR's patented MSX® (Multispectral Dynamic Imaging) enhancement technology. The E5 Pro thermal imaging camera is equipped with a 3.5-inch 640×480 touch screen, simplifying your workflow. You can edit and organize your photos, add detailed annotations, and upload directly to the FLIR Ignite cloud for easy access from any device. Share images with clients and create quick reports directly in FLIR Ignite, or advanced reports in FLIR Thermal Studio.

feature of product:

High efficiency inspection
Use FLIR Ignite cloud service to edit, store, organize and share images, add detailed annotations and easily access them from any device.

Find problems quickly
FLIR's patented MSX® (Multispectral Dynamic Imaging) enhancement provides highly detailed thermal images to help you quickly identify problem areas.

touchscreen
3.5-inch 640×480 pixel touch screen, one-touch level/span area adjustment function replaces manual adjustment to improve detection efficiency.

Share and report
Share footage instantly and create quick reports in FLIR Ignite on any device, or create advanced reports with FLIR Thermal Studio on your PC.

Applications:
- Industrial inspection of electrical and mechanical equipment
-Condition monitoring and preventive maintenance before equipment failure
- Building inspection to ensure energy efficiency

If you have any needs for Flir E6 Pro or E8 Pro infrared thermal imaging cameras, please feel free to contact us~

※Please note:

Thermal imaging cameras can only see the surface of objects and cannot see through walls .

Thermal imaging camera converts the thermal radiation of an object into a light signal for imaging. By observing the temperature difference on the surface of the object, it is displayed on the screen , providing signs invisible to the naked eye for the operator to make judgments. If the temperature difference is not too small, it cannot be clearly displayed. .

Except for thermal imaging cameras controlled by the military, which can see through, ordinary thermal imaging cameras cannot penetrate walls or objects.

Provide high-quality industrial endoscope pipeline cameras (pipeline inspection cameras, in-pipe cameras, in-pipe inspection cameras, in-pipe inspection endoscopes), which can be used for pipeline detection, pipeline obstruction detection and pipeline inspection. Special industrial endoscope pipeline detectors for pipelines can provide you with accurate and efficient solutions.

The built-in SD memory card of the tunnel endoscope camera can store photos and images, which can be viewed and browsed immediately after the shooting is completed, or transferred to a computer. The main unit is equipped with an AV terminal port, which can transmit endoscope images to the TV, which is very convenient to use.

The tube endoscope camera made in Taiwan has CE/FCC certification and is of reliable quality. The product is equipped with a 300,000-pixel (real pixels, not ordinary simulated pixels) 25mm lens coil, and the image is super clear. Contains an adjustable light source that allows you to see in the dark. It is suitable for pipeline inspection, gas pipes, oil pipelines, drainage pipes and factory piping inspection. It can understand pipeline cracks, scratches and rust damage of drainage pipes. and blockage conditions.

In order to save costs, some endoscope products use disposable dry batteries. Because endoscopes consume a lot of power, the subsequent result is that you have to spend money to buy batteries, which is not environmentally friendly and hurts your wallet. The pipeline inspection camera uses a non-keyed battery or a dry cell battery. It uses a replaceable rechargeable lithium battery, which can be recharged and charged and discharged more than 600 times. It is more environmentally friendly and economical than other general disposable batteries.

The tube endoscope camera has a 2-photo comparison function, allowing you to compare photos before and after repair, making it easier to discuss work with partners or explain to customers, allowing you to communicate with zero errors.

feature of product:

• Pipe endoscope cameras made in Taiwan (pipeline inspection cameras, in-pipe cameras, in-pipe inspection cameras, pipeline detectors, in-pipe inspection peepscopes, pipe-specific industrial endoscopes)
• Professional grade industrial endoscope, 3.5" TFT LCD screen, capable of dynamic photography/static photography storage, super easy to operate
• Using a 300,000-pixel high-resolution 25mm CMOS lens and high-quality optical lenses, the full-focus lens includes a super wide angle of 140 ^° , a normal lens of 73 ^° , a focal length of 5-60 cm, and a super clear field of view.
• Equipped with camera and video functions, the system is equipped with a 4GB SD memory card, allowing you to browse and view stored photos and videos at any time
• Highly sensitive 12 powerful white LEDs, the brightness can be adjusted, and the dark corners can be clearly displayed
• 2x digital zoom, multiple languages ​​available
• Gooseneck design at the front of the lens makes it easier to turn corners
• Can be output to TV and computer for viewing
• Use high-capacity lithium battery with long life
• IP67 dustproof and waterproof coefficient
• Snake tube length selection: 5M ~ 50M
• The fiberglass pipe material is a coiled pipe, which has strong support, sufficient uprightness, and no ductility. The push and pull force of the coiled pipe can be increased between the pipes (there are also coiled pipes made of other materials to choose from)
• The product includes a reel and a high-grade aluminum portable box, which is convenient for storage and has good product protection.
• Suitable for pipeline inspection and maintenance of pipelines, sewage pipes, air ducts, gas pipes, oil pipelines, and drainage pipes

Product specifications:

※Pipeline inspection cameras are custom-made. If you need other lengths, please call or email us.

High quality images and performance
Capture high-quality thermal images, easily identify targets and identify problems using FLIR MSX, VividIR and 160 × 120 (19,200 pixels) thermal resolution.

Improve the way you work
FLIR ONE Edge Pro features FLIR Ignite cloud services, compatibility with FLIR Thermal Studio, and step-by-step guidance for FLIR-specific applications to help you increase efficiency and expand your thermal imaging inspection program.

professional tools
With up to 2.5 hours of battery life and fast charging, FLIR ONE Edge Pro is always ready when you need it. This rugged camera has an IP54 rating and has passed a 2 meter drop test.

Innovative dual-lens industrial endoscope inspection tool for a variety of industrial applications. The PST-D601 dual-lens pipeline inspection endoscope has excellent image quality and inspection capabilities, providing precise visual inspection in small spaces. Endoscopes are suitable for industrial pipeline inspection and automobile maintenance and other fields. They can help you perform inspection and repair work quickly and accurately to meet the needs of industrial inspection.

feature of product:

• Dual lens, 640x 480 resolution, easy to switch between front camera and side camera, one-click switching.
• The lens diameter is 6mm. There are 6 white LED lights built into the front lens and 1 white LED light built into the side lens. The brightness intensity can be adjusted.
• The focal length of the front lens is 15-100mm; the focal length of the side lens is 3-50mm, making it easy to inspect at very close range.
• Photo pixels: 1600 x 1200, close to 2 million pixels.
• Uses sturdy and scratch-resistant sapphire glass lenses.
• 4x zoom control.
• Multi-language support.
• IP67 waterproof, oil-proof and dust-proof camera lens.
• 3.5-inch LCD monitor provides clear QVGA resolution viewing.
• Powered by 18650 lithium-ion battery (2600mAh), it can run continuously for about 5 hours.
• Ergonomic design, easy to operate. The main unit is covered with a soft cover, and the stand supports the monitor upright, making it easy to observe the monitor.

• Ultra-thin AC hook meter (current hook meter/hook meter/hook meter), using the average rectification method to measure the fundamental waveform component
• -25°C ~ 60°C operating temperature range
• Connect the CT6280 sensitive sensor to measure up to 4199A thick or paired wires
• 1000A average value, fixture diameter: 33mm
• Weighing 100g, the body is only 16mm thick, light and easy to carry
• Lightweight and thin body design, smoother operation in narrow spaces
• HIOKI Japan original company goods

Related components:
Main unit x 1, test lead L9208 × 1, button-type lithium battery (CR2032) × 1, instruction manual × 1