Made in Taiwan, this 3-piece 3.4mm replaceable universal cement drill bit set is suitable for high-tension screws and is suitable for a variety of materials including polished quartz tiles, metal plates, bricks, cement, gypsum boards and pottery. The unique drilling and locking function allows fast installation and fixing of screws while drilling holes.

Product Features :
- Suitable for high tension cement screws
- Drilling and locking, done in one go
- Must be used with a hexagonal screwdriver

Applicable:
Polished quartz tiles, metal sheets, bricks, cement, plasterboard, pottery

Specifications:
- Drill bit: Φ1/8” (3.4mm) x 55mm long
- Socket: 1/4" (6.35mm)

Origin:
Taiwan

Related Products:
👉 ABS032 Supplementary 3.4mm Replacement Universal Cement Drill Bit

The four-groove three-blade cement drill bit is specially designed for reinforced concrete. It has high-strength material and three-blade structure. It can penetrate quickly and efficiently, reduce tool wear and improve construction efficiency. The reinforced concrete drill tail is equipped with a tungsten steel alloy cutter head, which is tough and impact-resistant, and has no fear of steel bars. It is suitable for use with a force-free four-groove hammer drill to ensure excellent drilling results.

Product Features:

• Suitable for drilling steel bars in cement concrete
• Super-hard embedded tungsten steel cutter head, strong and wear-resistant, maximizes drilling speed and durability
• Rapid chip removal groove design effectively removes cement debris
• The alloy cutter head automatically positions, and the three main cutting edges easily crush concrete
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Must be used with the force-free four-groove hammer drill
• Four groove three blade cement drill tail, easily penetrate steel bars below 16mm

Taiwan-made 10-piece supplementary 3.4mm replacement universal cement drill bit is a universal cement drill bit replacement head designed specifically for high-tension screws. Suitable for polishing a variety of materials including quartz tiles, metal plates, bricks, cement, gypsum boards and pottery. The special drilling and locking function allows for quick installation and fixing of screws while drilling, effectively improving work efficiency and accuracy.

Product Features :
- Suitable for high tension cement screws
- The handle is one-piece, without shaking or resonance, and can drill holes accurately
- Impact resistant, not easy to bend or deform
- Wear-resistant, longer product life

Applicable:
Polished quartz tiles, metal sheets, bricks, cement, plasterboard, pottery

Specifications:
- Drill bit: Φ1/8” (3.4mm) x 55mm long

Product Material:
- Tungsten steel + alloy steel

Origin:
Taiwan

Related Products:
👉 E002-23032 3-piece 3.4mm replaceable universal cement drill bit set

The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Unit: mm

Made in Taiwan, this 3-piece 3.4mm replaceable universal cement drill bit set is suitable for high-tension screws and is suitable for a variety of materials including polished quartz tiles, metal plates, bricks, cement, gypsum boards and pottery. The unique drilling and locking function allows fast installation and fixing of screws while drilling holes.

Product Features :
- Suitable for high tension cement screws
- Drilling and locking, done in one go
- Must be used with a hexagonal screwdriver

Applicable:
Polished quartz tiles, metal sheets, bricks, cement, plasterboard, pottery

Specifications:
- Drill bit: Φ1/8” (3.4mm) x 55mm long
- Socket: 1/4" (6.35mm)

Origin:
Taiwan

Related Products:
👉 ABS032 Supplementary 3.4mm Replacement Universal Cement Drill Bit

DIAGER four-groove cement drill bit (water drill) imported from France, suitable for four-groove power-free hammer drilling, super-hard tungsten steel bit, hard and impact-resistant. The alloy cutter head has a positioning bump design, which can be automatically positioned. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift. The angle of the alloy tip of the four-groove cement drill tail is increased to improve the drilling ability. When used in conjunction with the force-free 4-groove hammer drill, the effect is first-class.

feature of product:

• French DIAGER four-groove power-free hammer drill cement drill bit uses super-hard tungsten steel bit as the drill bit, which is hard material, resistant to impact, has low wear rate and long service life.
• New double large row groove design, rapid mud removal and faster drilling speed
• The angle of the alloy cutter head is increased, and the top angle is designed at 160 ^° to improve drilling capabilities and efficiency.
• The alloy cutter head has positioning bumps that can be positioned automatically. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift.
• Suitable for dry walls, gradually increasing pressure relief grooves to accelerate chip removal design, fast chip removal
• The four-groove cement drill tail is suitable for use with the four-groove power-free hammer drill.
• Depending on the drilling material, the drilling speed can be 30% faster. The ideal test conditions in the laboratory test that the 8x160 drill tail can drill at least 500 holes.
• DIAGER is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Suitable for drilling materials:

Product Features:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• When drilling, it is necessary to maintain a stable pressure and frequently remove the drill bit from the drill hole to remove debris. Use a slow speed to drill harder materials to extend the life of the drill bit.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Origin:

• France

French original Diager four-groove cement drill bit (SDS-plus four-groove hammer drill bit), suitable for four-groove power-free hammer drilling, shock-resistant carbide head, hard and impact-resistant. The U-shaped groove design facilitates chip evacuation and allows for fast drilling speed.

feature of product:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact-resistant, low wear rate
• Four-groove cement drill tail, U-shaped groove design facilitates chip removal and fast drilling speed
• Diager SDS-plus four-flute hammer drill bit adopts shock-resistant carbide tip and is suitable for use with the force-free 4-flute hammer drill.
• Diager is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

• Straight shank drill bit set, metal, woodworking, cement drill bits, three uses, satisfied at one time
• Metal drill bit, made of HSS high-speed steel, precision ground and manufactured, long service life
• Cement drill bit, tungsten steel bit with high-strength alloy blade at the top of the bit
• Woodworking drill bit, made of medium carbon steel, center tip design, fast drilling speed
• Rapid chip removal and chip groove design
• ABS storage box makes it more convenient to store drill tails
• Suitable for use with electric drill

Made in Taiwan, this 3-piece 3.4mm replaceable universal cement drill bit set is suitable for high-tension screws and is suitable for a variety of materials including polished quartz tiles, metal plates, bricks, cement, gypsum boards and pottery. The unique drilling and locking function allows fast installation and fixing of screws while drilling holes.

Product Features :
- Suitable for high tension cement screws
- Drilling and locking, done in one go
- Must be used with a hexagonal screwdriver

Applicable:
Polished quartz tiles, metal sheets, bricks, cement, plasterboard, pottery

Specifications:
- Drill bit: Φ1/8” (3.4mm) x 55mm long
- Socket: 1/4" (6.35mm)

Origin:
Taiwan

Related Products:
👉 ABS032 Supplementary 3.4mm Replacement Universal Cement Drill Bit

Exclusive agent ~ DIAGER special cement drill bit imported from France for waterproofing and four-groove cement drill bit for water- stopping . It is SDS PLUS cement drill tail. The upgraded U-shaped groove is suitable for substrates with high moisture content in waterproofing and water-stopping projects, such as high-humidity sand. Stone, remove chips freely . The cutter head is made of shock-resistant carbide material, which is hard and impact-resistant. When used with a force-free 4-channel hammer drill, the effect is first-class.

Product Features:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact resistance, low wear rate, four-groove cement drill tail, upgraded U-shaped groove, suitable for bases with high moisture content in waterproofing and water-stopping projects Material, high humidity sand and gravel, free chip removal, fast drilling speed
• SDS-plus four-groove waterproof drill bit, suitable for use with the power-free 4-groove hammer drill
• DIAGER four-groove waterproof drill bit is suitable for planting reinforcement and chemical anchor bolts. It is a professional drill tail for water-stop construction.
• Diager, a drill bit originally imported from France, is the largest factory in Europe, a professional manufacturer of drill bits, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Product specifications: