Sort by:
6 products
6 products
- Portable trolley tool bag, made of 1680D Oxford fabric, providing higher load-bearing capacity
- After load-bearing test, it can bear up to 25 kilograms.
- Large-capacity multi-compartment storage space to meet your storage needs
- Equipped with wear-resistant pulleys, anti-slip and shock-proof, greatly upgraded mobility
- Reinforced anti-wear bottom plate, not easy to be damaged on rough roads
MI800III high pressure injection machine is a professional machine mainly used for structural injection. It is light in weight and easy to carry. It has ultra-high pressure and does not require an air pressure source. It uses an electric drill to drive the piston to generate high-pressure power, and pressurizes the leak-stopping agent into the cracks to achieve a water-stopping effect. It is the best choice for professional waterproofing, leak-stopping and structural reinforcement constructors.
Product Features:
- Taiwan-made portable electric high-pressure grouting machine (high-pressure grouting machine, high-pressure grouting machine)
- Fast construction: It can be increased to 5000PSI working pressure within seconds, and the injection time is faster than other models.
- Easy to carry: The body weighs only 7.5 kg, making it easy to carry and move.
- Easy maintenance: No special training is required for maintenance, eliminating downtime due to machine repairs.
- Simple operation and effective in stopping leaks: The agent can be effectively injected into tiny cracks to effectively stop leaks.
- Economical and affordable: The machine body has few consumable parts and the unit price is cheap, which is great value for money and can reduce costs.
Scope of application:
- Sealing and sealing of cracks, expansion joints, construction joints and structural joints in various buildings and underground concrete projects.
- Drilling wall plugging and reinforcement in geological drilling projects.
- Grouting of reservoir dams in water conservancy and hydropower projects, plugging and preventing leakage in water transfer tunnel cracks, and preventing and reinforcing cracks in dam concrete.
- Water leakage in subways, tunnels, culverts, sewage treatment pools, concrete cracks, can be plugged with water.
- Water leakage in basements, underground garages, underground passages, and concrete cracks can be blocked with water.
- Cracks in roof concrete slabs, wall pipes, corners and water leaks can be sealed with water.
- Cracks in concrete structures, beams, columns and slabs can be cured by high-pressure injection of epoxy resin.
Specifications:
- Weight: 7.5 KG
- Maximum output pressure: 11000 PSI
- Restart: <7500 PSI
- High pressure pipe safety range: <14000 PSI
- Switch valve safety range: <18000 PSI
- Output flow: 0.74 liters/minute
- Power supply (Taiwan): 110V
Equipped with:
- body
- 5M high pressure hose
- Switch valve set (including butter head)
- Metabo SBE560 Electric Drill (minimum wattage: 560 watts)
How to do it:
one. Notes before use:
- The correct voltage for this machine is 110V, and 220V voltage cannot be used.
- Before use, check the lubricating oil filling hole. If the lubricating oil in the spindle chamber is insufficient, add the specified lubricating oil.
- Before operating the machine, check the axis and pull rod to make sure there is no obstruction before use.
- After each filling, it should be cleaned twice with a clean special detergent.
two. Machine cleaning steps:
- After the medicine is injected, inject the remaining medicine back into the barrel, and then pour in the special cleaning agent (about 600cc). First, inject all the medicine in the feeding tube, make sure there is no medicine in the feeding tube, pour in the special cleaning agent (about 600cc) again, and put the switch valve back into the funnel for circulation.
- The cleaning time is Repeat this action twice for 3 - 5 minutes. After cleaning, pour in 50cc of clean engine oil and turn on the switch to allow the oil to lubricate the shaft.
- If there is no engine oil on site, please remove the spring and steel ball, clean them and store them properly to avoid damage to the piston during next use.
Use with products:
- Water-stopping agent - Hydrophilic PU foaming water-stopping agent / Hydrophilic crack water-stopping injection agent C-700 (single agent)
- Water-stopping agent - Hydrophobic PU foaming water-stopping agent / Hydrophobic crack water-stopping injection agent C-800 (single agent)
- PU foam and epoxy resin cleaning agent
- The internal copper product design of the sprinkler head enhances the service life
- Adjustable rotating head with 9-stage water discharge mode, wide range of use
- Labor-saving buckle structure, when the switch is buckled down, water can be discharged continuously to save labor.
- The handle is designed with thermoplastic rubber, which is comfortable and light to hold.
- With quick connector
Material:
Body: ABS+thermoplastic rubber
net weight:
200g
Origin:
Taiwan
Product Features:
- Taiwan-made strong magnetic aluminum alloy professional-grade fluorescent bubble level (level, level ruler, leveler, level), sensitivity increased by 3 times
- Precise German high lumen fluorescent light bulb, never fades
- Accuracy 0.057°=1mm, more sensitive and accurate
- Aluminum alloy widened plate, more stable and accurate, suitable for horizontal correction construction in various industries
- With strong magnet, strong suction
- PP hanging hole on the side, easy to hang
- Suitable for level measurement in construction, electrical engineering, piping, electrical appliances, etc.
feature of product:
Anti-cutting ability complies with European EN388 industrial glove protection level 3 protection
The best-selling CUT3 wear-resistant and cut-resistant gloves from Japan and South Korea comply with the European EN388 level 3 standard for protective gloves in terms of mechanical hazards.
Highly elastic and resistant to pulling
Cut-resistant gloves are made of three major man-made fibers + nitrile rubber and polymer HPPE glass fiber. They are super elastic and can quickly return to their original length after being released, making them more durable.
High wear resistance and good anti-slip/anti-slip effect
Elastic rayon, polyester, nylon, nitrile rubber and other materials are all wear-resistant. The anti-slip surface of the anti-slip and anti-cut gloves is made of foamed NBR nitrile rubber thermoplastic. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.
Breathability
The best-selling CUT3 wear-resistant and cut-resistant gloves in Japan and South Korea are made of three major man-made fibers + polymer HPPE glass fiber, woven in an excellent proportion, making them comfortable and breathable.
Comfort and flexibility
The anti-cut, wear-resistant and stab-proof gloves fit the hand and can fit tightly into the palm. They have good hand protection and can work more flexibly and smoothly.
Washable and oil-resistant
The polyester fiber material of cut-resistant gloves has high strength, is not easy to break, is quick-drying and washable, and does not wrinkle or shrink easily after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.
Durable
The best-selling CUT3 abrasion-resistant cutting gloves from Japan and South Korea are not only suitable for use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.
Professional OEM manufacturing
The best-selling NiTex wear-resistant and cut-resistant gloves in Japan and South Korea are professional gloves manufacturers in South Korea and OEM for many world-renowned international manufacturers. The quality of the gloves is reliable.
Scope of application:
Suitable for environments where it is easy to be cut by iron wires and sharp metal burrs.
5.5M x 25mm