NX482 automotive repair anti-collision primer imported from ICHINEN CHEMICALS CO., LTD., Japan.

• Anti-collision primer with rubber-flexible granular coating
• Can be recoated with other paints after drying
• Excellent adhesion, water resistance, rust resistance and impact resistance

use:

Prevents scratches and damage to the car's front fenders, side skirts, door sills and other suspension devices caused by the impact of flying stones while driving.

color:
grey

Internal capacity:
420ml

• JIP590 metal dye black pen, black repair paint in the form of correction pen
• The pen-type black dye can be easily repaired by drawing it on the peeling area.
• Forms a beautiful matte black film
• Uses special epoxy resin with excellent oil resistance
• Good fit and not easy to peel off when metal hits metal

Product Usage:

• Used to repair peeling parts of black dyed products
• Suitable for black coating of iron, aluminum, stainless steel, copper and other metals (cannot be used for plastic, rubber and other products)

Performance/Characteristics:

• Dry to the touch: 2~3 minutes
• Hardening and drying: about 20 minutes
• Heat-resistant temperature: 150℃ (continuous use 100℃)
• Coating area: 1.5-2m ²
• Operating temperature range: normal temperature

Product specifications:

• Content volume: 30ml

JIP119 metal mold cleaner (mold cleaner/mold cleaning degreasing agent/mold cleaning agent/mold descaler), a cleaning agent that removes dirt from metal molds and can remove residual rust inhibitors and other residues adhering to metal molds. Grease and wax buildup.

Product Features:

• JIP119 metal mold cleaner is a product specially developed for cleaning metal molds
• Can easily remove cutting oil, cutting powder, etc. when making metal molds
• Can easily remove anti-rust oil, wax anti-rust agents, etc. used when storing metal molds
• It is a chemical detergent with low toxicity
• It has strong cleaning power and quick-drying properties, which helps improve work efficiency.
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

• Clean cutting oil, chip powder, etc. used in making metal molds
• Remove rust inhibitor or oil stains from metal molds
• Remove oil stains on mechanical equipment and parts

capacity:

500ml

JIP126 powerful metal mold cleaner for injection molding machines, a cleaning agent that can remove dirt from metal molds. The cleaning agent can remove chemical reaction gases, slime and stubborn dirt.

Product Features:

• Dissolve and remove sticky, air-film and other stubborn stains formed during plastic injection molding and attached to metal molds, which can effectively prevent the occurrence of defective products.
• Best suited for resins that easily produce stains, such as polyacetal
• Choose according to the interval during molding or the stains when taking out the metal mold.
• Do not use the metal mold while it is still hot. Please use it when it has cooled to room temperature.
• Please perform anti-rust treatment when storing metal membranes
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

• Removes air film and stickiness attached to metal molds during resin injection molding
• Degreasing and cleaning metal molds

capacity:

420ml

Cutting lubricant, also known as cutting oil, cutting fluid, or lubricant, is an auxiliary effect of lubrication during the cutting process. Japan's original JIP114 super cutting lubricant is an environmentally friendly super cutting oil cutting agent, super cutting lubricating spray, chlorine-free and inactive sulfur type, suitable for various materials from light cutting to difficult cutting.

Product Features:

• Environmentally friendly cutting agent that does not contain chlorine, phosphorus, active sulfur, or heavy metals
• Suitable for a variety of materials from light cutting to difficult cutting
• Contains no chlorine, so no need to worry about dioxin production
• Based on mineral oil and using non-reactive additives, there is no need to worry about corrosion of materials or tools.
• No odor caused by sulfur additives
• Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.

Scope of application:

Used for tapping, thread cutting, drilling, reaming, broaching and other difficult-to-cut materials such as stainless steel, aluminum, copper and titanium alloys to lubricate during the cutting process

Performance/Characteristics:

Fusion load: 2452N

Steel plate corrosion: 1a (100℃x1hr)

Kinematic viscosity (40℃): 44.7cSt

Operating temperature range: below 100℃

capacity:

420ml

Japan's original imported ICHINEN CHEMICALS CO., LTD. NX512 dry chain oil, water-resistant extreme pressure chain lubricant, is a white extreme pressure penetrating lubricating grease (with white solid lubricant), which has superior Water resistance and adhesion, lubrication and anti-rust effects are excellent.

feature of product:

• NX512 dry chain oil has penetrating properties and can penetrate into details
• NX512 dry chain oil, strong anti-corrosion, does not affect O-rings
• Excellent adhesion, minimal spatter, and excellent performance
• Excellent water resistance, acid resistance and alkali resistance, it can maintain its performance even if water splashes on its surface
• Good penetration spreads oil into every detail
• Because it contains white solid lubricant, it has extremely strong lubricity and can withstand pressure, and has good silencing effect during friction.
• Operating temperature range -15℃ to 120℃
• It is also possible to spray upside down, making it easy to spray even in small areas

internal volume:

• 300ml

Instructions:

• Shake your chain well before spraying it.
• Due to the low viscosity when sprayed, after spraying on high-speed rotating chains such as bicycle chains, they should be left for about 20 minutes.
• Clean the chain first if possible.
• 30-60 minutes after spraying, the lubrication will dry and show performance.

※Notice:

NX512 dry chain oil is flammable, please keep away from fire sources or high temperatures.

ICHINEN CHEMICALS CO.,LTD. JIP695 immersion rust remover is a metal rust remover and rust removal water . It is suitable for metal rust removal. It has good rust removal effect and can extend the service life of components. and ease of use. It can also be used as a supplement to JIP694 super powerful rust remover .

feature of product:

• After soaking rusty metal or metal parts in JIP695 immersion rust remover for a few minutes, the rust on the surface will fall off.
• Rust can be easily removed by just soaking, and the rust removal effect is excellent.

Product Usage:

• Suitable for rust removal on metals, not suitable for non-metallic materials and surfaces.
• It is suitable for removing the oxidative film formed by concrete, lime, calcium deposits, etc. attached to the metal surface.

Instructions:

1. After spraying evenly on the rusted area, let it sit for a few minutes.
2. Wipe with a rag to remove rust.
3. For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
4. After rust removal, please clean the surface with water.
5. After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.

How to deal with severe rust:

1. Using a tool such as a steel brush, pour the rust remover onto the container, and then use the brush to brush the rusted surface.
2. After applying the rust remover, it is necessary to allow the rust remover to take effect. The leaving time should not exceed 10 minutes, otherwise the rust removal reaction will cause normal parts to be corroded as well.
3. Use a steel brush to remove rust spots on the surface.
4. For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
5. After rust removal, please clean the surface with water.
6. After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.

Product specifications:

• Capacity 4L

Welding groove rust inhibitor:

Applied to all types of steel groove surfaces to avoid rust during welding.

Rust at the welding groove will lower the commercial value of the steel and cause various problems such as welding defects. From bevel processing to welding construction, using KLIN WELD YE bevel anti-rust agent can effectively solve these problems.

Generally, anti-rust agent is applied to the groove, and the anti-rust agent needs to be removed before welding. Using KLIN WELD YE groove anti-rust agent product, you can directly weld and reduce the operating procedures.

Product Features:

• Can be directly welded
• Can be repainted
• The groove can be seen from above the coating film

Performance/Characteristics:

• Coating film: transparent
• Dry to the touch: about 20 minutes

• Film thickness: 5-7µm
• Exposure test: 1-2 months
• Viscosity: 11±1 seconds (FC No.4)
• Coating area of ​​1L: 15-25m ²

capacity:

420ml

Welding groove rust inhibitor:

Applied to all types of steel groove surfaces to avoid rust during welding.

Rust at the welding groove will lower the commercial value of the steel and cause various problems such as welding defects. From bevel processing to welding construction, using KLIN WELD SE-F bevel anti-rust agent can effectively solve these problems.

Generally, anti-rust agent is applied to the groove, and the anti-rust agent needs to be removed before welding. Using KLIN WELD SE-F groove anti-rust agent product, you can directly weld and reduce the operating procedures.

Product Features:

• Weld anti-rust, silver type
• Ethylbenzene-free type
• Can be directly welded

Performance/Characteristics:

• Coating: silver
• Dry to the touch: about 3 minutes
• Film thickness: 5-12µm
• Outdoor exposure test: 3-6 months
• Viscosity: 12±1 seconds (FC No.4)
• Coating area of ​​1L: 15-25m ²

capacity:

420ml