The multifunctional tool has the functions of utility knife, screwdriver, cap pry, ruler, hex wrench, bottle opener and other functions. Beautiful black ceramic non-stick paint spray, stainless steel handle, anti-rust and anti-corrosion. The SK2 black blade is sharp and sharp, and the metric scale on the blade is convenient for measurement. Pry plate and bottle opener design, suitable for 4-10mm hexagonal screws, thickened blade back, comfortable grip.

feature of product:

• Multiple functions, a multi-purpose tool, with the functions of utility knife, screwdriver, cap pry, ruler and compass, Allen wrench, bottle opener, etc.
• Ceramic non-stick paint spray, stainless steel handle, anti-rust, anti-corrosion, longer service life
• SK2 black blade utility knife, sharp and sharp
• Can be used as a cross and slotted screwdriver
• Can be used as an inner hexagonal wrench, suitable for 4, 6, 8, 10mm hexagonal screws
• Metric scale on the blade makes measurement easy
• The front-end crowbar design and the lower right corner bottle opener design are great tools for home life.
• Thickened blade back, easy to hold

Selection of utility knife blades:

✅ SK2 black blade large utility blade 18mm

A52 3W LED flashlight is a CREE LED flashlight that can illuminate every corner and bring an unparalleled exploration experience. It has an IPX6 waterproof rating to ensure long-lasting performance. Made in Taiwan, the rugged aerospace aluminum alloy casing guarantees durability. Whether you're camping, hiking, or responding to an emergency, you can rely on it to perform. With this top-notch flashlight, you'll find guidance in the dark. Light the way forward.

feature of product:

• A52 3W high-brightness LED flashlight made in Taiwan, using American CREE XP-G2 high-quality LED bulbs
• Three levels of brightness switching, irradiation range up to 250 meters
• Aerospace aluminum alloy shell, anodized, sturdy and durable
• Single-button three-stage push switch: the first stage is 320 lm (lumen), the second stage is 150 lm, and the third stage flashes 320 lm
• Can use AA batteries, which are easy to obtain and replace
• IPX6 water-repellent design
• A good partner for disaster prevention, camping and work

Product specifications:

The 0.3W bendable double magnetic LED flashlight snake lamp is a multi-purpose lighting tool. Snake tube lights, with their soft, bendable design, allow them to provide bright illumination in small, hard-to-reach areas. The magnetic LED flashlight with dual magnetic suction design has a strong magnetic base, allowing you to fix the flashlight on a metal surface. The lamp head also has a magnetic design, making it easy to pick up and absorb small parts. The 0.3W bendable dual magnetic LED flashlight is made of Japanese Nichia LED bulbs and provides high-brightness lighting effects. Whether indoors or outdoors, the magnetic LED flashlight is an ideal choice, allowing you to easily meet various lighting needs.

feature of product:

• Optical lens double magnetic LED flashlight work light ~ The bottom is equipped with a strong iron suction, which can be magnetically fixed for use; the lamp head magnet can be used for lighting and picking up ferrous objects.
• Made using Japanese Nichia LED bulbs
• The 360-degree bendable hose can be bent at any angle you need according to work needs, and can illuminate deep gaps.
• Bendable dual magnetic LED flashlight, aluminum alloy steel shell
• Uses 3 LR44 mercury batteries, 12 hours of use time
• IPX-6 waterproof design
• Applicable to all walks of life

Product specifications:

Experience the convenience and efficiency of the manual/electric dual-purpose 3.6V electric screwdriver!

The screwdriver is light and compact, combining manual and electric modes to make locking and disassembly easy. Intuitive buttons make operation simple, LED lights provide illumination in low-light environments, and non-slip handles increase grip comfort. The quick-release design makes it easy to replace the screwdriver head, supports Type-C USB charging, and comes with a hexagonal handle S2 cross screwdriver head that is easy to use in narrow places to meet various repair needs. This electric screwdriver is your ideal time-saving and labor-saving tool.

Product Features:
- Manual/electric dual-purpose, compact and light, flexible to operate
- Save time and effort, a good helper, light and convenient
- Intuitive button, easy to lock and disassemble
- Upgraded buttons, double the durability
- With LED light to assist in low light environment
- Non-slip handle, comfortable grip
- Quick-release design, easy to replace the screwdriver head
- Type-C USB charging
- Comes with a 1/4" (6.35mm) hexagonal handle, 100mm long S2 screwdriver head, 5mm diameter, easy to use in narrow places

The best-selling Nitex P-200 thickened anti-slip gloves in Japan and South Korea have good breathability and are wear-resistant and anti-slip work gloves. They have strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, and stretch-resistant. Whether you are indoors or outdoors, Nitex P-200 thickened anti-slip gloves ensure your safety and performance. Through the special anti-slip design, you can have a stable grip on wet or greasy surfaces, thereby improving work efficiency.

Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.

ANSI A5 level and the highest level of EN388 cut resistance, Cut A5 anti-cut and anti-slip touch gloves, are like the rare treasure silk armor in martial arts novels, which cannot be damaged by swords and protect the hands from cuts.

The best- selling Cut A5 anti-cut and anti-slip touch gloves in Japan and South Korea comply with the highest protection level of European EN388 industrial gloves and ANSI A5 anti-cut gloves. They have anti-slip, wear-resistant and touch functions. They are the best for hand protection in gardening, warehousing and transportation. partner.

feature of product:

• Metal braided anti-cut gloves, lighter and thinner than the first generation, with more flexible hand protection
• Sensitive touch sensor function, you can slide your phone while working without taking off your gloves
• Resistant to water washing and oil stains, not easy to wrinkle or shrink after washing
• Durable, high density, will not be punctured immediately, good protection
• Comfortable and breathable, comfortable to wear
• Excellent resistance to cutting, tearing and abrasion

product material:

• Metal Fabric
• PolyethylenePolyethylene
• NylonNylon
• Nitrile rubber

Origin:

• South Korea

The 3rd generation upgraded aluminum alloy ratchet manual and electric dual-purpose copper tube expander combines manual and electric functions to provide an efficient and labor-saving tube expanding experience. Made of lightweight and durable aluminum alloy, it is suitable for all types of copper tube expansion operations and is an ideal choice for professional workers. Its unique design includes a magnet and a physical tenon structure, with accurate double-sided positioning to ensure stable operation. The spring design allows for quick replacement of the clamping row, while the automatic tripping mechanism can produce an idling effect to prevent scratching of the tube, making the bell mouth smoother and more beautiful.

Product Features:

• Lightweight aluminum alloy body, with special eccentric key design, to achieve labor-saving, fast and accurate 45° bell-mouth expansion effect
• Equipped with an automatic tripping mechanism, the spring will automatically pop open, producing an idling effect, effectively preventing scratches on the tube and making the bell mouth smoother and more beautiful
• Applicable specifications: 1/4", 3/8", 1/2", 5/8", 3/4"
• Made of aerospace grade aluminum alloy, durable and lightweight, suitable for various professional needs

• Double-headed ratchet torx wrench made in Taiwan, double-headed ratchet wrench
• Ratchet ring wrench with double shaking head design, wide construction range
• Unique 72-tooth design provides high torque and easy locking in 5° narrow spaces
• The ratchet torx head can be turned 180°, providing excellent functionality in any working situation. Extended ratchet torx wrench
• Shaking head design, wide construction range, especially suitable for use in narrow spaces
• Special treatment of chromium-molybdenum alloy steel to strengthen the ultra-thin plate surface
• The extended ratchet ring wrench is the most labor-saving tool for car repairs

  Product number	Specification	Unit: mm
  		L	A	B	C	D	G
  FM8201012L	10 x 12	294.0	18.8	21.3	8.8	9.2	317.2
  FM8201113L	11 x 13	329.7	21.3	26.8	9.2	10.1	401.7
  FM8201214L	12 x 14	329.7	21.3	26.8	9.2	10.1	401.7
  FM8201417L	14 x 17	369.9	26.8	28.4	10.1	11.6	638.8

Made in Taiwan, the A12 pocket flashlight includes a pen clip and is easy to carry. The pocket flashlight design combines the strength of aerospace aluminum alloy with the excellent lighting effect of Japan's NICHIA ultra-high white LED. It can be used continuously for 12 hours, allowing you to have a reliable lighting partner at all times.

feature of product:

• Using Japanese NICHIA super bright white LED lamp
• Ultra white light brightness: 90,000mcd
• High-hardness aerospace aluminum alloy shell anodized
• Ultra-high waterproof: IPX6 waterproof standard
• Lighting distance: 10 meters
• One AAA battery can be used continuously for 12 hours
• Made in Taiwan

Product specifications:

• Extra large open-end adjustable wrench made in Taiwan
• The opening is enlarged and the usability is increased by 18%.
• The hollow handle of the powerful adjustable wrench reduces weight and saves effort.
• The extra-large open adjustable wrench has a 60% wider side design, making it easier to apply force.
• Manufactured from professional grade chromium vanadium steel
• The hollow movable wrench body CR-V SAE6140 has been specially heat treated and has a hardness of HRC 40-50

2-in-1 wall detector + laser rangefinder, dual-use in one ~

Wall detector avoids wires and steel bars, so you don’t have to worry about drilling the wrong holes during decoration

Laser rangefinder function makes measuring dimensions more convenient

Warranty period: 6 months

• Ratchet torx wrenches (gear wrenches, movable torx ratchet wrenches, two-way ratchet torx wrenches) made in Taiwan
• Ratchet box wrench, head bevel angle 25°, quick and easy to use
• Torx ratchet wrench, suitable for narrow spaces (especially when ordinary wrenches cannot be used)
• 25-degree beveled torx ratchet wrench, medium carbon steel plate + CR-V chromium vanadium alloy steel ratchet shaft, super hard and durable
• Ratchet box wrench, alloy steel baffle, double the torque and more durable ※The above product pictures are of 12x14mm size, actual shipment will be based on the selected size.

  Product specifications:

  Product number	size	L	a	b	d	D	H
  FM820608	6x8	112	6	8	20	20	8
  FM820610	8x10	130	8	10	20	twenty three	8
  FM820608	10x12	138	10	12	twenty three	26	8
  FM820610	12x14	172	12	14	30	32	10.2
  FM820608	14x17	203	14	17	37	40	11
  FM820610	17x19	203	17	19	37	40	11
  FM820621	19x21	232	19	twenty one	41	44	11

  product material:

  Body: medium carbon steel plate/ratchet shaft: chromium vanadium steel

  Origin:

  Taiwan

The 36mm PVC quick pipe cutter is a pipe cutter and water pipe scissors specially designed for cutting water pipes and plastic pipes. It uses a triangular blade, cuts stably without deflection, is durable, easy to operate, and has high cutting efficiency. It is an essential tool for water pipe construction and maintenance.

Product Features:

• Cutting capacity up to 36mm
• Thin tube cutouts are not easily deformed
• Triangular blade design, automatic blade retraction, stable cutting without deflection, durable
• Teflon coated blade, not easy to rust
• Equipped with safety latch design
• Ergonomic grip, effort-saving and comfortable

Specifications:
- Total length 200mm
- SK5 blade, HRC51-55 hardness

Material:
- Body: Aluminum alloy

Origin:
- Taiwan

👉 More replacement blade introduction - 36mm PVC fast pipe cutting knife special blade

The multifunctional tool has the functions of utility knife, screwdriver, cap pry, ruler, hex wrench, bottle opener and other functions. Beautiful black ceramic non-stick paint spray, stainless steel handle, anti-rust and anti-corrosion. The SK2 black blade is sharp and sharp, and the metric scale on the blade is convenient for measurement. Pry plate and bottle opener design, suitable for 4-10mm hexagonal screws, thickened blade back, comfortable grip.

feature of product:

• Multiple functions, a multi-purpose tool, with the functions of utility knife, screwdriver, cap pry, ruler and compass, Allen wrench, bottle opener, etc.
• Ceramic non-stick paint spray, stainless steel handle, anti-rust, anti-corrosion, longer service life
• SK2 black blade utility knife, sharp and sharp
• Can be used as a cross and slotted screwdriver
• Can be used as an inner hexagonal wrench, suitable for 4, 6, 8, 10mm hexagonal screws
• Metric scale on the blade makes measurement easy
• The front-end crowbar design and the lower right corner bottle opener design are great tools for home life.
• Thickened blade back, easy to hold

Selection of utility knife blades:

✅ SK2 black blade large utility blade 18mm

Summer lightweight anti-slip and wear-resistant gloves have good breathability, strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, pull-resistant, and have strong grip. Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.

feature of product:

Highly elastic and resistant to pulling
The lightweight, non-slip and wear-resistant gloves are made of three major man-made fibers + nitrile rubber. They are super elastic and can quickly return to their original length after being released, making them more durable.

High wear resistance and good anti-slip/anti-slip effect
All four materials have wear-resistant properties. The anti-slip surface of the anti-slip gloves is made of foamed NBR nitrile rubber and is thermoplastically bonded. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.

Breathability
Breathable non-slip work gloves are made of three major man-made fibers, woven in an optimal proportion, making them comfortable and breathable.

Comfort and flexibility
The thin, non-slip and wear-resistant gloves that are best-selling in Japan and South Korea have moderate thickness and improve the shortcomings of gloves on the market that are too thin and lack protection and are too thick and difficult to grasp. The gloves fit snugly on the hands and can fit tightly into the palms. They have good hand protection and can work more flexibly and smoothly.

Washable and oil-resistant
The polyester fiber material of the lightweight anti-slip and wear-resistant gloves is strong and not easy to break. It is quick-drying and washable. It is not easy to wrinkle or shrink after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.

Durable
Anti-slip and wear-resistant gloves are not limited to use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.

product material:

• Spandex (elastic man-made fiber)
• Polyester(polyester fiber)
• Nylon(nylon)
• Nitrile(nitrile rubber)

Elastic man-made fiber (Spandex)
Its biggest feature is its super elasticity and high deformability. It can be stretched to twice the length and can quickly return to its original length after being released. It is stronger than rubber and more wear-resistant.

Nylon fiber (Nylon)
The advantages are that it is strong, wear-resistant, smooth, light in weight, and the material is not easy to deform, pill, and age.
 
Polyester fiber (Polyester)
It has the characteristics of high strength, not easy to break, strong expansion and contraction, and quick drying. In terms of cleaning and storage, it also has the advantages of not easy to wrinkle, not easy to shrink, not easy to get mold, etc.

Nitrile rubber (Nitrile)
It has the advantages of high wear resistance, oil resistance, good air tightness, strong adhesion, and aging resistance.

Origin:

• South Korea

• 3-stage torque adjustment
• Simple operation, easy to use
• The torque value reaches 6Nm, the highest among the same level products
• Simple design, intuitive operation
• Forward/reverse button, release and lock in seconds
• Double-sided LED lighting design allows construction even in dark places
• Electric screwdriver, assembly and maintenance done in one machine
• The kit contains 24 25mm screwdriver bits, 1 50mm screwdriver bit and 1 screwdriver adapter extension rod, supporting a variety of uses
• Type C charging design, faster charging

※ Manual torque up to 10 Nm (Newton meter)

Warranty: 6 months

Note: The instruction manual is located under the component tray. Please remove the entire component tray to view it.

*Usage data test method: After fully charging the machine, drive 2cm woodworking screws into 10mm thick pine wood, and continuously install and remove more than 100 screws.

• Impact resistant and long service life
• Round shaft design, convenient for use in narrow spaces
• S2 special alloy steel is heat treated to provide superior durability for high power operation
• High-strength and high-torque bit specially designed for impact drivers
• 1/4" hex shank for use with vibratory drills, electric drivers, and especially impact drivers
• Ideal for heavy-duty work such as factory or heavy industrial work

Special wall panel expansion nails (wall panel expansion nails/expansion screws/hollow geckos/expansion screws) are used for fixing gypsum boards, light partitions, and calcium silicate boards . They are used in situations where self-tapping screws and general expansion screws are not applicable . For example, when hanging light steel frame partition walls, self-tapping screws cannot be used due to insufficient screw holding force on the panel, and ordinary expansion screws cannot be used due to the hollow structure inside the wall. However, using wall panel expansion nails can achieve good results.

The hollow wall anchor structure of the wall panel expansion nail consists of a dish-head screw and a sleeve with a support plate that can be expanded. During installation, first drill a hole on the wall panel with the same size as the outer diameter of the sleeve, insert the wall panel expansion nail into the hole, and then use the wall panel expansion device to pull out the screw. At the same time, the fixing plate on the sleeve will open to fix the sleeve to the wall panel, remove the inner screw, put on the fixing part, and then lock the inner screw.

Product Features:

• It is used for gypsum board, hollow board, calcium silicate board wall and other objects that need to be fixed. It can be used as a base after expansion, which is stable and reliable.
• Quick installation, special tie rods for controlled installation
• Umbrella-shaped opening prevents the anchor bolt from spinning in the hole
• Best firmware for hanging and hanging

use:

• Used to fix floor panels, decorative strips, groove/track strips, etc.

Substrate:

• Hollow brick, gypsum board partition wall (light partition), calcium silicate board

Product Material:

• Casing: CQ2 iron
• Screws: 1006/1008 iron, galvanized

feature of product:

• Water-stop needles (injection needles, high-pressure grouting nozzles) made in Taiwan
• High pressure filling machine accessories
• The water-stopping needle is firmly fixed in the hole by a quick tightening device after drilling the concrete, and is connected to the high-pressure pipe by a quick connector. When the agent is injected into the hole, there is a check valve device to prevent the resin from flowing back after high-pressure pouring. .

High-pressure pouring and leak-stopping method:
Structural cracks and water leakage treatment

1. Drill at an angle of 45 degrees at 5 cm to 10 cm to the left or right of the lowest point of the crack to half the thickness of the structure. Drill from low to high in sequence. The hole spacing is preferably 15 cm to 30 cm. Drill to the highest point before drilling again. Bury the water stop needle once.
2. Since cracks in general structures are irregular, special attention must be paid to drilling holes that must cross the fracture surface for injection to be effective. (To achieve good results, the distance between holes can be shortened)
3. After the water-stop needle is installed, first check the structural strength of the structure; if the structural strength is insufficient, use a high-pressure infusion machine to inject a single-liquid hydrophobic foaming agent until the injection material is found to ooze out on the surface of the structure.
4. After the filling is completed, the water-stop needle can be removed after the material is completely solidified.

Treatment of water leakage in construction joints

1. Drill holes 5 cm to 10 cm to the left or right of the lowest point of the construction joint at an angle of 45 degrees to a depth of 1/2 of the thickness of the structure. Drill from low to high. The appropriate hole spacing is 15 cm to 30 cm. After reaching the highest point, bury the water-stop needle again. Since cracks in general structures are irregular, special attention must be paid to drilling holes that must cross the crack surface. Injections are effective.
2. After the water-stop needle is set, use a high-pressure infusion machine to inject the water-stop foaming agent until the foaming agent is found to seep out on the surface of the structure.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.
4. If the water seepage still cannot be improved, just use a water-stop foaming agent to repair it.

Honeycomb water leakage treatment

1. In the honeycomb area, drill a hole every 25cm to 30cm, with a depth of 1/2 of the thickness of the structure, and then bury the water-stop needle and tighten it.
2. After the water-stop needle is set, use a high-pressure infusion machine to inject the water-stop foaming agent until the foaming agent is found to seep out on the surface of the structure, which can completely solve the water leakage problem.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Water leakage from ring cracks

1. First, drill directly at the crack of the ring piece. The drilling depth must exceed the thickness of the ring piece. Bury the water-stop needle and then inject the water-stop foaming agent;
2. Then drill a hole 5cm to 10cm to the left or right of the ring piece at an angle of 45 degrees to a depth of 1/2 of the ring piece thickness, bury the water-stop needle, and inject the water-stop foaming agent again.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Water seepage between ring pieces

1. Drill holes at the water seepage between the ring plates first. The drilling depth must exceed the thickness of the ring plates.
2. Bury the water-stop needle and then inject the water-stop foaming agent.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Grouting hole water seepage

1. Drill a 5mm hole directly on the pouring hole cover
2. Then inject the water-stop foaming agent through this hole.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Product specifications:

*If you have any needs, please contact our company directly.

Product Introduction

Made of high-grade alloy steel, it can effectively avoid the problems of easy wear and brittleness of general screwdrivers, and has high durability and longer service life . What’s even more thoughtful is that the screwdriver head is reinforced with sandblasting to make it harder, and the magnetic design effectively prevents the screws from slipping and firmly grasps each screw. The best part is that the handle is specially designed with a gravity-type hexagonal handle, which allows you to use a wrench to help increase the torque. When using it, you don’t have to use as much effort as with a traditional screwdriver . You can easily remove/lock screws without any effort.

Product Features:

• Professional cross compound screwdriver (cross screwdriver, screwdriver, gravity cross flat head screwdriver)
• Chromium-molybdenum alloy steel manufacturing
• Ergonomically designed handle, comfortable and non-slip grip
• The handle is made of TPR+ABS material, which is resistant to dirt and oil, and will not corrode in acidic and alkaline weather.
• Screw head sand-hardened, with magnetic
• Gravity hexagonal handle, enhanced torque, can use a wrench to assist in turning heavy-load screws
• Made in Taiwan

Specifications:

Made in Taiwan, this 3-piece 3.4mm replaceable universal cement drill bit set is suitable for high-tension screws and is suitable for a variety of materials including polished quartz tiles, metal plates, bricks, cement, gypsum boards and pottery. The unique drilling and locking function allows fast installation and fixing of screws while drilling holes.

Product Features :
- Suitable for high tension cement screws
- Drilling and locking, done in one go
- Must be used with a hexagonal screwdriver

Applicable:
Polished quartz tiles, metal sheets, bricks, cement, plasterboard, pottery

Specifications:
- Drill bit: Φ1/8” (3.4mm) x 55mm long
- Socket: 1/4" (6.35mm)

Origin:
Taiwan

Related Products:
👉 ABS032 Supplementary 3.4mm Replacement Universal Cement Drill Bit

B+BTec glass chemical anchors imported from the Netherlands (chemical anchors, chemical anchors, anchor reinforcement chemical tubes, chemical bolt anchors, chemical anchors), can be used for underwater construction, and are suitable for various vibration loads , foundation bolts, steel plate fixation, and reinforcement. It is quickly consolidated after installation and has high bearing capacity.

Obtained ETA European Technical Approval Certification, which is similar to ICC-ES AC58 / AC308 (formerly known as ICBO) and ASTM E 1512.

Create your own personal style ~ Diamond grinding rod engraving blade set for electric engraving machine (engraving pen). Use different grinding rods to create different surprises!

Grind, carve, polish and cut a cover to easily create items in your own style. 

Product Features:

• Diamond powder coating, tough and durable
• Suitable for engraving heads of various brands of engraving machines/engraving pens
• Diamond grinding rods with different uses can be used for engraving, grinding, surface painting, cutting, polishing, etc. according to different properties.
• Suitable for engraving personal items, toys, gifts, and souvenirs
• Applicable to wood, stone, glass, metal, non-metal, etc.

The upgraded version of the second generation breathable and comfortable PT-200 non-slip and wear-resistant touch gloves combines the characteristics of sensitive touch, anti-slip, wear-resistant and comfortable and breathable. Touch-sensitive work gloves provide excellent touch performance, allowing you to easily touch smartphones, tablets and other touch screen devices while wearing gloves.

Sensitive touch anti-slip technology ensures that you can operate the touch screen accurately and flexibly, whether you are clicking, sliding or zooming.

Comfort and breathability are one of the features we attach great importance to when designing gloves. High-quality materials and humanized design ensure that the gloves fit comfortably and comfortably when worn, while providing good breathability.

The upgraded II generation breathable, comfortable, non-slip and wear-resistant touch gloves are ideal for various occasions, whether it is daily life, work or outdoor activities. They can still operate touch devices freely while working or doing activities, providing excellent performance and Comfortable use experience.

product material:
Nylon
Elastic man-made fiber (Spandex)
Polyester fiber (Polyester)
NBR (nitrile rubber)
CNT (Carbon Nano Tube Carbon Nano Tube)

Origin: South Korea

The best-selling P-200 thickened anti-slip gloves in Japan and South Korea have good air permeability, are wear-resistant and anti-slip work gloves, have strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, stretch-resistant, and have strong grip.

Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.

Highly elastic and resistant to pulling
Thickened anti-slip and wear-resistant gloves are made of three major man-made fibers + nitrile rubber. They are super elastic and can quickly return to their original length after being released, making them more durable.

High wear resistance and good anti-slip/anti-slip effect
All four materials have wear-resistant properties. The anti-slip surface of the anti-slip gloves is made of foamed NBR nitrile rubber and is thermoplastically bonded. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.

Breathability
Breathable non-slip work gloves are made of three major man-made fibers, woven in an optimal proportion, making them comfortable and breathable.

Comfort and flexibility
Thick non-slip and wear-resistant gloves that are best-selling in Japan and South Korea. The gloves have a moderate thickness, which improves the shortcomings of gloves on the market that are too thin and lack protection and are too thick and difficult to grasp. The gloves fit snugly on the hands and can fit tightly into the palms. They have good hand protection and can work more flexibly and smoothly.

Washable and oil-resistant
The polyester fiber material of the thickened non-slip and wear-resistant gloves has high strength and is not easy to break. It is quick-drying and washable. It is not easy to wrinkle or shrink after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.

Durable
Anti-slip and wear-resistant gloves are not limited to use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.

Origin:

• South Korea

綠光4D 16線雷射水平儀

取代傳統墨線，採用高亮度綠光雷射與智慧型自動調平技術，大幅提升工作效率，是安裝施工的理想利器，適用於磁磚鋪設、木作裝潢、電工佈線、門窗安裝等多種場景。

產品特色：

•  4D 16線高精準標線：水平/垂直全覆蓋，定位快速精準
•  綠光雷射：亮度高、射程遠，室內外均清晰可見
•  智慧自動調平：≤3°自動調整，超出範圍持續閃爍並嗶嗶聲提醒
•  多種安裝方式：支援腳架、升降台、牆貼等
•  一鍵鎖定斜線模式：支援斜面施工需求
•  亮度調節+遠端遙控：依環境調整光線，操作更便利
•  清晰4鍵介面：水平、垂直、斜線、亮度獨立控制，直覺易用
•  堅固便攜：附收納盒，攜帶安裝兩相宜
•  適用多種工程場域：地磚鋪設、室內裝修、電力/木工安裝等

警告：使用時，雷射光請勿直接對準眼睛或從反射面間接照射，否則可能會對眼睛造成永久傷害

• Made in Taiwan, detachable 14-piece modular parts box, parts storage box, impact-resistant PP material, sturdy and durable
• There are three sizes of storage boxes in the parts storage box to store parts and tools
• The tool box has high transparency, high identification of parts placement, and can store and preserve parts in one box.
• Detachable 14-piece modular parts box Parts storage box with 4 removable partitions for free planning of space and levels
• The parts storage box is detachable, with a waist buckle design and an inner opening design, making it easy to take with one hand and not easy to drop
• The tool box has a screwdriver holder design, which can be used to place screwdriver bits and hexagonal wrenches according to your needs.
• The parts box can be used to store various parts and accessories, especially suitable for DIY accessories and gadgets
• Detachable 14-piece modular parts box, parts storage box, foldable and versatile, 14-piece box set to take with you at any time, light and easy to carry
• The parts storage box is separated into left and right boxes, which can be carried individually or stacked for storage and display.

Specifications:

• Labor-saving wire cutters made in Taiwan (labor-saving water nozzle pliers, labor-saving needle nose pliers, labor-saving iron cutting pliers, labor-saving steel bar cutting pliers, labor-saving wire cutting pliers)
• Chrome molybdenum steel casting, can cut piano alloy steel wire
• The knife edge is treated with high frequency, making it tough and durable.
• The serrated blade is sharp and can cut steel wires
• Torque balance, labor-saving and easy
• Ergonomic PVC anti-slip handle, easy to hold and won’t fall off

Lightweight 5-stage lighting headlamp, 1W super bright white light LED headlamp work light, headlamp lighting angle can be adjusted, suitable for mountaineering, camping, night fishing and construction and repair, etc., IPX4 splash-proof design allows you to relax and work more smoothly.

The head-mounted 1W ultra-bright white light LED headlamp work light with a red light attachment design can be used as an emergency rescue function as well as a firefly viewing headlamp to observe fireflies and insects without disturbing them, helping you observe the dynamics of insects at night.

Lightweight and easy to store. Lightweight and comfortable headlamp with adjustable light strip to make you more comfortable when using it. The single switch headlamp is easy to use and is suitable for both adults and children.

Product Features:

• Lightweight 5-stage LED ultra-white LED headlamp, 1W brightness, suitable for mountaineering, camping, night fishing and construction and repair
• Lightweight and easy to store light and comfortable headlamp
• The headlight strip is adjustable to make your use more comfortable
• The headlight has a single switch design, which is easy to use even when wearing gloves
• Lighting up to 50 meters
• The headlight angle can be adjusted up and down
• IPX4 water-resistant design
• 5 lighting modes: full brightness, dim brightness, SOS, flashing and off
• The red light can be used as a headlight for firefly viewing, making it easier to observe insects.