• Made in Taiwan, nylon nail sets, nylon bolt sets, nylon anchors, plastic plugs, plastic geckos, plastic anchor bolts, nylon anchor bolts, nylon wall bolts
• Suitable for fixed use and various types of building materials

Product Features:

• Use the multi-functional cleaning scraper to remove dirt and stubborn dirt quickly and cleanly!
• Safety scraper, no need to use adhesive remover, easily scrapes away old adhesive residue without damaging the glass.
• The multi-functional cleaning scraper descaler uses a 3 1/2" wide blade, a retractable blade, and quick and easy blade replacement.
• Ergonomically designed handle makes the dirt scraper easier to use

Product use:

• Scrape off wall paint, wallpaper, double-sided tape and dirt on tabletops, floors, glass, and tile wallpaper surfaces.

Specifications:

• Blade width: 89mm
• Length: 145mm

Origin:

• Taiwan

Bright colorful shell, streamlined shape, beautiful and practical. The heat-treated cold-rolled high-carbon steel ruler has excellent elasticity, allowing you to maintain its shape no matter how you twist it, and it can be retracted and extended very smoothly. Hook design, easy to store, light and easy to carry. Super practical 2M magnetic mini colored measuring tape, available in three colors: red, orange and black~

Product Features:

• Streamline design
• Mini and compact, with hook design, easy to carry and convenient to use
• Heat-treated cold-rolled high-carbon steel ruler tape, clear font, good elasticity, so you can twist it without deformation

Specifications:

• 2M x 9mm
• Ruler marking: cm/inch
• Heat-treated cold-rolled high carbon steel tape + PE plastic shell

• Portable trolley tool bag, made of 1680D Oxford fabric, providing higher load-bearing capacity
• After load-bearing test, it can bear up to 25 kilograms.
• Large-capacity multi-compartment storage space to meet your storage needs
• Equipped with wear-resistant pulleys, anti-slip and shock-proof, greatly upgraded mobility
• Reinforced anti-wear bottom plate, not easy to be damaged on rough roads

• Labor-saving wire cutters made in Taiwan (labor-saving water nozzle pliers, labor-saving needle nose pliers, labor-saving iron cutting pliers, labor-saving steel bar cutting pliers, labor-saving wire cutting pliers)
• Chrome molybdenum steel casting, can cut piano alloy steel wire
• The knife edge is treated with high frequency, making it tough and durable.
• The serrated blade is sharp and can cut steel wires
• Torque balance, labor-saving and easy
• Ergonomic PVC anti-slip handle, easy to hold and won’t fall off

• The internal copper product design of the sprinkler head enhances the service life
• Adjustable rotating head with 9-stage water discharge mode, wide range of use
• Labor-saving buckle structure, when the switch is buckled down, water can be discharged continuously to save labor.
• The handle is designed with thermoplastic rubber, which is comfortable and light to hold.
• With quick connector

Material:
Body: ABS+thermoplastic rubber 

net weight:
200g 

Origin:
Taiwan

Originally imported from Japan ICHINEN CHEMICALS Company, Lubricating 303 anti-rust lubricating penetrating agent (penetrating anti-rust lubricating oil/anti-rust lubricant) has anti-rust, lubrication, penetrating and other functions. The 2-purpose nozzle cover design has good rust resistance and permeability, and has low odor. It is no problem to spray upside down.

Product Features:

• Originally imported from Japan's ICHINEN CHEMICALS company, Lubricating 303 anti-rust lubricating penetrating agent has good rust resistance and permeability.
• Lubricating 303 anti-rust lubricating penetrating agent can quickly penetrate the corroded metal surface and exert a lubricating effect on the rusted metal bottom layer.
• Lubricating 303 anti-rust lubricating penetrating agent is sprayed on rusted bolts and nuts, which can penetrate immediately and operate easily.
• Low odor type to reduce unpleasant odors at work
• Unique dual-purpose cap design, no need to replace nozzles
• Penetrating anti-rust lubricant can be sprayed upside down, making it easy to spray even in small areas

Anti-rust and lubrication performance tests under different environments: 

Product Usage:

• Anti-rust, lubrication and penetration of automobiles, motorcycles, bicycles and mechanical parts

internal volume:

• 420ml

product description

product material:
carbon steel 

Origin:
Taiwan

SDS made in Taiwan Plus four-groove, four-edge cement drill bit and high-strength four-edge alloy bit improve drilling capabilities and efficiency. The four-groove cross-blade cement drill tail can achieve excellent drilling performance when drilling holes in bricks, cement concrete, and gypsum boards. It works well when paired with a force-free 4-groove hammer drill, and the construction is fast and labor-saving.

feature of product:

• Made of German super-hard tungsten steel and made of high-heat copper rods, it is tough and durable
• The four-groove power-free hammer drill uses a cement drill bit to drill the tail, which is impact-resistant and has low wear rate.
• Special thread design, fast mud discharge and fast drilling speed
• Cross-blade tungsten steel drill bit, precise hole diameter, no deviation in drilling, and improved hole entry speed
• Suitable for use with the power-free 4-groove hammer drill, saving time and effort during construction
• Four-edge design of alloy cutter head improves drilling ability and efficiency
• 400mm length, suitable for use with 6-minute labor-saving hammer drill, reducing resistance and increasing service life

Product Features:

Origin:

• Taiwan

• Professional gardening scissors (troughing shears, wire trough pliers, pruning shears, fruit branch shears, branch shears) made in Taiwan
• The blade is made of SK5 special alloy steel, and the blade has a special grinding angle, making it sharper and more durable.
• Professional garden shears with aluminum handle sheath, comfortable to hold, labor-saving and lightweight
• Labor-saving design, long-term use without fatigue
• Can be used as a wire trough cutter, faster and more convenient
• Lock design, convenient storage and high safety

Product specifications:

Scope of application:

• Suitable for gardening, tree branches, telephone crimping lines, wire troughs, rubber strips, PVC hoses, etc.

The 3/4" tapered burr scraper is specially designed for trimming copper tubes, aluminum tubes, and thin iron tubes. It has a hexagonal shaft design and can be directly operated with an electric drill or screwdriver, which is efficient and convenient. The pointed conical blade is sharp and durable, meeting industrial-grade cutting requirements and quickly removing burrs. The processed surface is smooth and delicate, reducing the roughness and ensuring the stable quality of the finished product. It is suitable for all kinds of trimming operations and improves processing efficiency.

Product Features:
✔ Applicable to 2-6mm copper tubes, aluminum tubes, and thin iron tubes (1-19mm)
✔ Hexagonal shaft design, can be directly used with electric drill to improve work efficiency ✔ Conical blade, in line with industrial-grade cutting requirements, cutting precision and sharpness ✔ High surface smoothness, reducing burrs and ensuring the quality of finished products ✔ Double groove hexagonal shaft design to ensure more stable fixation and stability

Product specifications:  3/4" (1~19mm)
Product material: HSS high speed steel
Origin: Taiwan

• Double-head 6-purpose screwdriver: including cross-head screwdriver #1 / #2 / #3, slotted screwdriver 4mm / 5mm / 6mm, one size 6
• Replaceable design: double-head screwdriver head, torque up to 320kg-cm
• Screwdriver head: S2 alloy steel, sturdy and durable
• Telescopic design: The total length of the screwdriver head is 150mm. The length can be adjusted according to the work needs. The shortest length can be 20mm and the longest length can be 120mm.
• Anti-slip handle: ergonomic design, easy to hold
• Hangable design: There is a hole at the end of the handle, which can be hung

  Product specifications:

  • Screwdriver head length: 150mm
  • size: 1, 2, 3/ 4, 5, 6
  • Material: S2 alloy steel

  Origin:

  • Made in Taiwan

The 6-inch professional automatic center punch is used for calibration operations before drilling. The center punch is equipped with a spring device, allowing you to operate it easily without hammering. It is professional, stable and accurate!

In addition to professional industrial uses, the 6-inch professional automatic center punch is also a reinforced glass breaker. It is a no-knock reinforced glass window breaker that can be used to break strengthened glass. It is definitely a must-have for safe escape in your car!

The center punch of the fast and safe window breaker does not require hammering. Just aim the tip at the tempered glass that needs to be broken and press hard to break the window glass easily and quickly! The accurate and labor-saving automatic center punch of the knock-free breaker is more convenient, faster and labor-saving than the window-breaking hammer and escape hammer! Hurry up and equip your car with this professional center breaker to protect the safety of you and your family.

Unlike ordinary escape hammers, the 6-inch professional automatic center impact breaks car window glass in less than 1 minute.
The 6-inch professional automatic center punch is compact and easy to carry, allowing you to take it with you anywhere!

Five professional functions:

• No knocking
• Automatic center positioning
• Needles are replaceable
• Stable and accurate
• Strong and weak strength can be adjusted

feature of product:

• Professional automatic center punch (strengthened glass breaker) made in Taiwan
• Fast: No tapping required, golden instant pressure, quick defeat, an excellent tool for emergency escape.
• Safety: High-quality and strong chromium vanadium steel, not ordinary plastic material, will not break when hit hard in an emergency
• Stable: Professional automatic center fixation, strong and weak strength can be adjusted
• Convenience: Pen-shaped anti-slip design, compact and easy to carry. Place it in the car for self-defense and escape, so you are prepared

Product specifications:

• Length: 6" (150mm)
• Needle material: SUJ2
• Body material: chromium vanadium steel

Precautions:

Do not use on heat-treated steel to extend needle life.

Explore endless light with the dazzling illumination of CREE LED flashlight. With powerful magnets, this 3W high-power flashlight can easily stick to any metal surface, bringing you unparalleled convenience. Its aerospace aluminum alloy casing ensures rugged quality and reliability in a variety of environments. Whether it's camping, outdoor adventures or emergencies, this CREE LED flashlight will be your best choice.

feature of product:

• 3W high-brightness LED flashlight made in Taiwan, using American CREE advanced ultra-white LED bulbs
• Aerospace aluminum alloy steel shell, anodized, sturdy and durable
• Single-button three-stage push switch: the first stage is 320 lm (lumens), the second stage is 150 lm, and the third stage is 75 lm
• Irradiation range up to 250 meters
• Just use AA batteries, which are easy to obtain and replace.
• IPX5 water-proof design
• Suitable for disaster prevention, camping and home use

Product specifications: 

Designed for style-conscious designers and lovers of minimal aesthetics, this 5M steel tape measure combines a sleek form with timeless color palettes. Whether it's the clean sophistication of pure white or the energetic touch of orange-white, it delivers both function and style in one elegant tool.

Compact and lightweight, it's easy to carry and operate single-handedly. The smooth brake-lock mechanism ensures the tape stays in place during measurements—preventing accidental retraction and enhancing accuracy and control. From interior layout planning to industrial use, this tape measure is the perfect choice for professionals and home DIYers alike who value both performance and aesthetics.

Product Features：

■ Brake Lock Mechanism – Secures the tape in place to prevent accidental retraction.

■ Matte-Finish Tape – Reduces glare for clear visibility and easy reading of measurements.

■ Excellent Standout – High-rigidity tape maintains straightness and stability during use.

■ Durable Construction – ABS outer shell offers superior impact resistance.

■ Anti-Drop Design – Comes with a wrist strap for safety and convenient portability.

■ Classic Colors – Available in two styles: Minimalist White (cm only) / Energetic Orange (cm & inch dual scale)

Specifications：

■ Materials：Case – ABS / Tape – Steel

■ Dimensions：70 × 60 × 35 mm

■ Weight：200g

The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Unit: mm

• No special equipment is required and can be used indoors or outdoors.
• Simple operation and easy to use.
• Micro-defects that are difficult to detect with the naked eye can also be highlighted by the bright red color, so it is easy to find scars and avoid mistakes in color inspections.
• There is no restriction on the material, shape and completion status of the object. (Except coated surfaces and plastics)
• In spray form, it is easy to use and easy to carry.
• Safe for use on the most corrosive aluminum and magnesium alloys.
• As long as it is not erased, the inspection results can be saved.
• Inspection can be carried out at room temperature to 80°C.
• Inspection is carried out at -10℃ to 50℃, and the detection sensitivity is 1μm width and 10μm depth.

Product Usage:

It can be used for all metal materials such as iron, non-ferrous, magnetic and non-magnetic, as well as non-metallic materials such as porcelain and glass.

• Cast parts: pinholes, shrinkage cracks
• Forging part: Forging cracks
• Welding parts: cracks, holes, poor joints, penetration defects
• Fatigue phenomena of metal materials: grinding cracks, burning cracks, cutting cracks
• Defect inspection: drums, boilers, pipes, etc.
• Strip Inspection: Strip Inspection of Hot Spot Packaging Materials

Instructions:

The dye penetration flaw detection method is to soak the defective part of the surface of the item to be inspected with a red penetrating liquid, then use a cleaning solution to remove the red penetrating liquid, and then use a white developer to create a capillary image, so that the defective part is soaked in red. The fluid develops color, allowing defects that are invisible to the naked eye to be discovered.

The inspection method specifically refers to the following four basic steps:

Product specifications:

Cleaning fluid:
- Appearance: colorless transparent liquid
- Operating temperature range: 0~60℃
- Content volume: 420ml
- Quantity: 2 cans

Soaking fluid:
- Appearance: red liquid
- Operating temperature range: 0~80℃
- Content volume: 420ml
- Quantity: 1 can

Developer:
- Appearance: White powder coating
- Operating temperature range: 0~50℃
- Content volume: 420ml
- Quantity: 1 can

• 4-12mm HSS step drill tail (trapezoid drill bit) for 9-step white iron, spiral body design, fast chip removal speed and high work efficiency
• Spiral step drill can drill holes of various specifications with one drill bit
• Step drill bit, durable and long service life
• HSS step drill tail step drill bit step drill bit spiral step drill hexagonal head step drill pagoda drill bit hole opener ladder round hole drill

Be applicable:

• Tinplate, copper, iron sheet

Product specifications:

• 9-step size: 4, 5, 6, 7, 8, 9,10, 11, 12mm
• Material: HSS M35
• Handle: 1/4” hex handle

Origin:

• Taiwan

• Labor-saving wire cutters made in Taiwan (labor-saving water nozzle pliers, labor-saving needle nose pliers, labor-saving iron cutting pliers, labor-saving steel bar cutting pliers, labor-saving wire cutting pliers)
• Chrome molybdenum steel casting, can cut piano alloy steel wire
• The knife edge is treated with high frequency, making it tough and durable.
• The serrated blade is sharp and can cut steel wires
• Torque balance, labor-saving and easy
• Ergonomic PVC anti-slip handle, easy to hold and won’t fall off

feature of product:

• Three-in-one functions of magnetizing, degaussing and magnetic screw suction
• Instantly magnetized, the magnetism increases and the screws will not fall off
• Can be quickly demagnetized
• NdFeB powerful magnet, the strongest permanent magnet, the magnetic attraction will never fade away
• You can choose to demagnetize or magnetize the screwdriver head according to your personal work needs.
• The screwdriver magnetizer pushes the front end of the screwdriver head and can also be used as a magnetic screw holder to prevent the screws from falling out.

Instructions for use:

• Magnetization: Put the magnetizer into a hexagonal handle screwdriver or driver head. The driver head will instantly become magnetic and can surely attract the screws and the screws will not fall out.
• Degaussing: Rub the screwdriver or screwdriver head against the degaussing device on both sides of the outer ring of the magnet end to degauss.

Be applicable:

• 1/4"(6.35mm) hexagonal handle screwdriver and bit

product material:

• Body: nylon
• Magnet: NdFeB

Package:

• 2 entries/card

Origin:

• Taiwan

• 15-degree universal adapter, suitable for narrow spaces such as blind corners, wall corners, door edges, etc.
• Suitable for 1/4"(6.35mm) hexagonal shaft screwdriver
• Quick chuck design makes it easier to replace the screwdriver head
• Can be turned 15° to get close to the wall to improve work efficiency
• Universal 360° rotation makes construction more comfortable
• Can be used with various single-head screwdriver bits or sockets
• Pull up the blue collar, and the 15-degree universal joint can also be used as an extension rod.
• Comes with cross #2 S2 material screwdriver bit

取代傳統墨線的測量利器。結合高亮度綠光、LED 雙氣泡與鋁合金機身，為泥作、木工與居家修繕提供精準定位。

產品特色

• 高亮綠光十字線： 搭載高能見度綠光模組，提供 ±2mm / 5M 精準度，穿透力勝過紅光，大幅提升定位效率。

• 鋁合金防撞機身： 全機採高強度鋁合金搭配專屬灰橘配色，捨棄易損塑料，兼具防撞耐磨與專業質感。

• LED 發光雙氣泡： 內建水平/垂直氣泡儀，配備 LED 背光設計，在昏暗工地或夾層施工依然清晰判讀。

• 強磁吸附與靈活擴充： 背面大面積磁碟可快速吸附於輕鋼架或金屬表面；底部配備螺紋孔支援標準腳架，徹底解放雙手。

• 彈性規格任選： 依作業需求，自由選擇「單機款」或「附腳架款」。

產品規格

• 雷射光源： 綠光十字線 (Output <1mW)

• 機身材質： 鋁合金

• 機身配色： 科技灰 + 百利世橘

• 精準度： ±2mm / 5M

• 水平儀器： 水平氣泡 + 垂直氣泡 (具備 LED 發光功能)

• 固定方式： 背面大面積磁碟 / 底部腳架螺紋孔

• 電池規格： 2 顆 AAA (4號) 電池 (※本商品不含電池，需自備)

規格

• 【單機款】： 綠光十字線雷射水平儀主機 x 1

• 【附腳架款】： 綠光十字線雷射水平儀主機 x 1、專屬腳架 x 1

安全警告與售後保固

•  安全警告： 本產品為高亮度專業雷射儀器，請勿將雷射光直接對準眼睛，或從反射面間接照射，以防視力受損。

•  安心保固： 提供原廠 6 個月保固服務 (僅限非人為損壞之內部機件故障)。

Korea's top food-grade anti-cut gloves, high-grade metal weaving, lightweight and comfortable, protect hands from cuts, provide excellent protection, and protect your hands when cooking. The best thing is that it is a touch-sensitive glove. You don’t need to take off your gloves when cooking. You can follow the operation while swiping your phone to watch the cooking live broadcast.

• American ANSI anti-cutting highest level A5 test
• EU EN388:2016 4242E anti-cut test
• Metal woven anti-cut gloves, light and easy to wear, breathable and comfortable
• Sensitive touch sensor function, you can slide your phone while cooking or working without taking off your gloves
• Excellent resistance to cutting, tearing and abrasion
• Washable and reusable

Origin:
South Korea

The low-pressure pouring reinforcing syringe is specially designed for cracks in structural walls. It is a syringe matching the crack injection repair method and is used to repair cracks in concrete and mortar. The syringe injects the epoxy resin into the cracks at low pressure and speed through rubber band pressure to restore the integration of the cracked concrete and mortar, preventing rainwater or carbonic acid gas from intruding into the concrete structure through the cracks and causing the neutralization of the concrete, thus restoring the concrete. The durability of the structure, simple construction, and low pressure will not damage the structure.

Product specifications:

• Components: syringe, syringe base, rubber band
• Injectable capacity of one syringe: 50cc
• Origin: South Korea

Be applicable:
Various structural building structures, such as highways, bridges, residences, etc., may suffer from cracks due to internal factors such as aging of the building, improper internal stress, or external factors such as poor construction, earthquakes, and uneven foundation settlement.

Purpose of crack pouring:

• Block the infiltration of air and moisture, prevent steel bars from rusting, and neutralize concrete.
• The separated concrete surfaces on both sides of the crack are bonded and compounded, and the loose concrete is re-bonded to achieve a strengthening effect.

Repair principle of perfusion method:

• The infusion method is a repair method that injects reinforcement into the crack from the surface of the crack to keep the crack displacement to a minimum and prevent deterioration or increase in width.
• During the filling process, the air and reinforcing agent in the original cracks are replaced, and the air is gradually discharged through the fine cracks.
• The larger the crack depth (section), the greater the required perfusion energy.

The necessity of structural crack reinforcement:

• The structural system of the building loses part of its seismic resistance due to damage from earthquake forces. If the section is not reinforced and repaired, stress concentration will form on the original fractures during another earthquake, which will intensify the damage and reduce safety.

Fracture pressure pouring reinforcement method

1. Scope of application:
If structural cracks with a crack width of more than 0.3mm occur in reinforced concrete, main towers, bridge piers, abutments, spacer beams, main beam interiors and other structural elements, epoxy resin is injected under pressure to fill the cracks to repair the damaged beams. , columns, plates and walls and other structural elements to prevent moisture from penetrating and causing corrosion of steel bars.

2. Use construction method:
Low pressure and low speed continuous perfusion method.

3. Construction sequence:

Construction examples of low-pressure pouring reinforcement for cracks:

Construction sequence diagram:

related materials:

Crack sealing: Mungo 4100 crack sealing epoxy resin (Epoxy) can be used ~ concrete crack filling reinforcing material

Crack pouring: Mungo 4200 crack pouring epoxy resin (Epoxy) can be used ~ concrete crack repair and reinforcing material

Injection syringe: It can be pressurized with a rubber ring and used for low-pressure, low-speed continuous injection.

Precautions:

Visually check whether epoxy resin remains in the syringe barrel. If there is no epoxy resin remaining in the syringe barrel, it means that the crack has not been filled with epoxy resin. The syringe barrel should be replaced and epoxy resin should be added.

• 18-gauge knitted nylon + metal braided wire, excellent comfort and sensitivity
• Excellent anti-impact, anti-cut, anti-slip and wear-resistant capabilities
• Metal braided anti-cut gloves, more flexible hand protection
• Excellent TPR thermoplastic rubber impact protection system on the back of the hand, with high resilience to eliminate large-area impacts
• Palm padding protects hands from repeated impacts and helps absorb shock
• NBR nitrile rubber coating improves wear resistance and provides excellent grip in wet conditions
• Devil's felt design makes the cuffs more secure to wear
• Washable, not easy to wrinkle or shrink after washing
• Durable, high density, will not be punctured immediately, good protection
• Excellent wear resistance and cut resistance, passed ANSI A5 and EN388 4X42E level cut resistance certification
• Suitable for petroleum industry, machinery, chemical industry, mining industry and heavy industry, trawlers, metal industry, general work, maintenance, construction, engineering, piping, assembly industry, automobile manufacturing, packaging, electronics, glass industry, handling of sharp parts, etc. .

product material:

• Metal Fabric
• PolyethylenePolyethylene
• NylonNylon
• Nitrile rubber NBR

Origin:

• South Korea

• Made in Taiwan, 4-inch lightweight large-open adjustable wrench
• Professional grade chromium vanadium steel material
• Increase the opening by 18% and reduce the weight by 10%
• Special tiger claw design, anti-slip and anti-falling, maximizes torque and object-biting ability
• Comes with precision scale
• Ergonomic handle, comfortable and easy to hold