Sort by:
40 products
40 products
- AC and DC voltage detectors (voltage and current detectors, voltage testers, voltage detectors, electroscopes) made in Taiwan
- The voltage detector can determine the voltage condition in the AC/DC circuit; it is a common and convenient tool to check whether low-voltage electrical equipment is leaking.
- High brightness display, easy to identify
- Double circuit reinforced insulation protection
- Compact and easy-to-carry electroscope
- US ETL certification
Product specifications:
- Voltage range: 100-250V (AC/DC), frequency 50-60Hz
- Current consumption:
- Material: Body ABS+TPR covering
Environmental conditions:
- Operating environment temperature: -5℃~40℃
- The floating voltage must not exceed 10% of the standard voltage
- This instrument refers to the insulation class (overvoltage category II)
- Pollution level two
Precautions:
- The maximum measuring voltage value of the AC and DC voltage detector is 300V, and the voltage indication range is 80-300V AC/DC. It cannot be considered that the neon lamp does not light up, which means that the object under test is not charged.
The Fluke 301E AC/DC blade series hook meter has a thin and compact body that can be carried in your pocket. The thin-pointed jaw design can easily clamp densely packed cables. Fluke 301E also integrates multiple functions of current, voltage, resistance, continuity, frequency (voltage frequency and current frequency), capacitance, and diode. You can handle more testing needs with one clamp meter.
The AC and DC current test functions can be applied to more new energy photovoltaic and wind power, new energy vehicles, communications, data centers and other application scenarios that require DC testing.
feature of product:
- The body weighs only 154g and is 16mm thick. It is thin, light and portable and can be put in your pocket.
- 10mm fine-tip pliers, easily clamp into densely packed cables
- AC and DC 1000A range, 0.01A high resolution
- Voltage, resistance, continuity test function
- Current frequency, voltage frequency test function
- Capacitor and diode test function
- Backlight function
Fluke 87V digital multimeter multimeter original company product (BI-FK-87V)
Fluke 87V digital multimeter multimeter original company product (BI-FK-87V)
Fluke 87V has greatly improved measurement functions, diagnostic functions, resolution and accuracy, and can solve more problems in motor drives, factory automation equipment, power distribution and electromechanical equipment. Fully meets the requirements of ANSI/ISA S82.01 second edition and EN61010-1 CAT IV 600V/CAT III 1000V standards. Can withstand voltage pulses above 8,000 V, greatly reducing the risk of surges and breakdowns.
Protection classes for all inputs are Category III, 1000 V and Category IV 600 V. Can withstand pulses above 8,000 V, greatly reducing the risk of surges and breakdowns.
Proper measurement of pulse width modulated motor drive signals
Fluke 87V is designed specifically for the complex signals generated by speed-regulated motor drives. Potential productivity will be gained by eliminating the need to guess at drive system failures. Every measurement and every measurement is precise.
feature of product:
- Accurately measure noisy pulse-width modulated AC voltages. Measurements can be made on the ASD and motor terminals.
- Accurately measures frequency (motor speed). Frequency measurement is not affected by ASD load frequency
- Using the optional current clamp accessory, AC current can be measured
- Compare the 87V reading to the value displayed on the ASD
- Special masking measures prevent the impact of high-frequency and high-energy noise generated by large drive systems
Fluke 15B+ digital multimeter, professional-grade accuracy, durability and safety. The Fluke 15B+ combines all the core features you need in a digital multimeter into a portable, durable tool that can be easily operated with one hand, even when wearing gloves. From AC/DC voltage and current measurements (up to 1000V and 10A) to comprehensive functionality including resistance, capacitance and frequency checks, the 15B+ is the tool of choice for troubleshooting a wide range of electrical problems.
The CAT III 600V safety rating gives you peace of mind when performing routine inspections of electrical equipment and appliances, measuring voltage levels at electrical outlets or switches, or diagnosing circuit problems. The Fluke 15B+ is not only suitable for DIY enthusiasts, but also for novice electricians who want to simplify their toolbox. It is a reliable and versatile addition to your toolbox.
Product Features:
- 600 V CAT III safety rating
- AC/DC voltage measurement up to 1000V
- AC/DC current measurement up to 10A
- Measure voltage, resistance, continuity, capacitance
- Diode test, data hold
- Large, easy-to-read display with white backlight
Specifications:
| Function | Range | Resolution | Accuracy |
| AC DC Volts (40 Hz to 500Hz) | 4.000 V 40.00 V 400.0 V 1000 V |
0.001 V 0.01 V 0.1 V 1 V |
1.0% + 3 |
| DC Direct Current Volts | 4.000 V 40.00 V 400.0 V 1000 V |
0.001 V 0.01 V 0.1 V 1 V |
0.5% + 3 |
| AC alternating current millivolts | 400.0 mV | 0.1 mV | 3.0% + 3 |
| DC direct current millivolts | 400.0 mV | 0.1 mV | 1.0% + 10 |
| Resistance (Ohm) | 400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ |
0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ |
0.5% + 3 0.5% + 2 0.5% + 2 0.5% + 2 0.5% + 2 1.5% + 3 |
| capacitance | 40.00 nF 400.0 nF 4.000 μF 40.00 μF 400.0 μF 1000 μF |
0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF |
2% + 5 2% + 5 5% + 5 5% + 5 5% + 5 5% + 5 |
| Maximum voltage between any terminal and ground | 1000V | ||
| Operating temperature | 0 °C to 40 °C | ||
| Storage temperature | -30 °C to 60 °C | ||
| Dimensions (H x W x L) | 183 x 91 x 49.5 mm | ||
| weight | 455 g | ||
Origin: China
綠光4D 16線雷射水平儀
取代傳統墨線，採用高亮度綠光雷射與智慧型自動調平技術，大幅提升工作效率，是安裝施工的理想利器，適用於磁磚鋪設、木作裝潢、電工佈線、門窗安裝等多種場景。
產品特色：
• 4D 16線高精準標線：水平/垂直全覆蓋，定位快速精準
• 綠光雷射：亮度高、射程遠，室內外均清晰可見
• 智慧自動調平：≤3°自動調整，超出範圍持續閃爍並嗶嗶聲提醒
• 多種安裝方式：支援腳架、升降台、牆貼等
• 一鍵鎖定斜線模式：支援斜面施工需求
• 亮度調節+遠端遙控：依環境調整光線，操作更便利
• 清晰4鍵介面：水平、垂直、斜線、亮度獨立控制，直覺易用
• 堅固便攜：附收納盒，攜帶安裝兩相宜
• 適用多種工程場域：地磚鋪設、室內裝修、電力/木工安裝等
警告：使用時，雷射光請勿直接對準眼睛或從反射面間接照射，否則可能會對眼睛造成永久傷害
Capable of entering tight spaces with a multi-directional articulating head, this borescope is ideal for precise inspections and maintenance tasks. Whether you're working in pipelines, HVAC systems, automotive repairs, mechanical maintenance, or home inspections, the short-lens articulating endoscope meets your needs. The dual-direction articulating camera allows fast and accurate diagnostics, improving your work efficiency.
The short-lens articulating endoscope features 160° dual-direction articulation and a 360° rotatable snake tube, allowing for thorough, dead-angle-free inspections. With a 7-inch HD screen and 1MP resolution, it delivers crystal-clear images. Its IP67 waterproof rating and 5-level adjustable LED brightness make it easy to navigate through narrow or curved gaps and locate hard-to-see areas.
Product Features:
■ 720P HD resolution: Clear image detail for improved inspection accuracy.
■ 360° flexible control: Fully rotatable camera head for versatile, in-depth inspections.
■ 7-inch IPS widescreen: Sharp and distortion-free display, supports HDMI output.
■ Durable insertion tube: Outer braided abrasion-resistant material for long-lasting use.
■ 5-level adjustable LED light: Adapt brightness freely to suit various environments.
■ IP67 water and dust resistance: Industrial-grade protection for both camera and cable.
■ Photo and video support: Comes with a 16GB memory card for instant media capture and storage.
■ Long-lasting battery: Up to 8 hours of continuous use on a single charge.
■ Multilingual interface: Supports multiple languages including English and Chinese for easy operation.
The NKH1 infrared thermal imaging camera (infrared thermal imaging camera, thermal imager, thermal imaging camera, thermal imaging camera, handheld thermal imaging camera, industrial thermal imaging camera) designed and manufactured in Taiwan uses the Thermopile thermopile thermal sensor imported from Germany. Detector to convert temperature difference and electrical energy into each other . When a temperature difference occurs on both sides of the thermopile, an electric current is generated, which can be used to measure temperature. Structurally, it consists of multiple thermocouples. When using a thermopile to measure temperature, it can overcome the shortcoming that the potential difference generated by a single thermocouple is too small and difficult to measure. Compared with traditional infrared thermal imaging cameras, it can provide clearer thermal sensing images with higher accuracy.
Infrared thermal imaging cameras can detect invisible heat energy and can see and measure subtle changes in temperature. Due to temperature differences, different colors appear. Through the image, the entire temperature surface can be quickly detected and the high and low temperatures can be identified. If there is a temperature abnormality, it may be a fault.
Product Features:
- Infrared thermal imaging camera, thermal resolution 80 x 64 pixels
- Thermal imager viewing angle 39° x 31°
- High temperature alarm mode
- High/low temperature tracking
- Ambient humidity display
- Can take pictures while recording
- Can be connected to a laptop or computer for simultaneous display
- 3.5-inch screen, clear images
- Auto focus mode
- IP54 waterproof rating
- Automatic/manual power off
- Rechargeable lithium battery, fully charged, can be used continuously for about 4 hours
- Won the Gold Medal and Double Gold Medal of the British Bis Invention Award
- Made in Taiwan
When using the NKH1 infrared thermal imaging camera, you should pay attention to the temperature difference between the ambient temperature and the object being detected to avoid the situation where the temperature difference is too small to accurately identify . During operation, it is recommended to adjust the upper and lower temperature limits to obtain a clearer thermal image and higher accuracy.
Origin: Taiwan
※Please note:
Thermal imaging cameras can only see the surface of objects and cannot see through walls .
Thermal imaging camera converts the thermal radiation of objects into light signals for imaging. By observing the temperature difference on the surface of the object, it is displayed on the screen , providing signs invisible to the naked eye for the operator to make judgments. If the temperature difference is not too small, it cannot be clearly displayed. .
Except for thermal imaging cameras controlled by the military, which can see through, ordinary thermal imaging cameras cannot penetrate walls or objects.
The FLIR C5 pocket thermal camera is the tool of choice for building inspections, facility maintenance, HVAC/R, electrical repair, and other troubleshooting applications. Find problems faster with a 160x120 (19,200 pixel) thermal imager and a 5 megapixel visible light camera.
MSX® multi-spectral dynamic imaging can immediately identify the location of temperature issues, making it easy to identify hidden problems.
The 3.5-inch touch screen is easy to use and allows you to quickly check and record maintenance status. The P54 housing provides a high level of dust and water resistance and is designed to withstand a 2M drop. It has a built-in LED flashlight to view dark and hard-to-reach areas.
Pocket-sized design, easy to carry. With the FLIR C5, you can always find heat spots, air leaks, plumbing problems, and more.
Specifications:
| Overview | |
| Infrared sensor | 160 × 120 (19,200 pixels) |
| Thermal sensitivity/NETD | <70mK |
| Field of view (FOV) | 54° × 42° |
| Minimum focus distance |
Thermal image: 0.1M
MSX®: 0.3M
|
| Image frequency | 8.7 Hz |
| focus | No focus |
| Wavelength range | 8–14 μm |
| Screen size | 3.5 inches |
| Visible light camera | 5 megapixels |
| Digital camera focus | fixed |
| Image Display | |
| Image Adjustment |
Automatic level and span
Manual Level and Span
One-touch level and span
|
| Image Mode |
Infrared imaging
Visible light images
MSX (Visual details embossed on thermal image)
Picture-in-picture (infrared area on visual image)
|
| Gallery | Thumbnails and custom folder structure |
| Color Mode |
Iron
Gray
Rainbow Color
Arctic
Lava
Rainbow HC Color HC
|
| Screen rotation | support |
| Touch screen | Capacitive touch |
| Measurement and analysis | |
| Temperature measurement range | -20~400°C (-4 ~ 752°F) |
| Accuracy |
At ambient temperature 15 ~ 35°C (59 ~ 95°F) and object temperature above 0°C (32°F)
0 ~ 100°C (32 ~ 212°F): ±3°C (±5.5°F)
100 ~ 400°C (212 ~ 752°F): ±3%
|
| Measurement correction |
Emissivity Matte/Semi-matte/Semi-gloss + custom value
Reflected surface temperature
Atmospheric compensation
|
| Image storage and transmission | |
| Storage Media | Internal storage memory |
| Image storage capacity | >5000 images |
| Image file format | Standard JPEG |
| Communications and Connectivity | |
| USB | USB 2.0 Type C connector |
| other | |
| Battery Type | Rechargeable internal lithium-ion battery |
| Battery operating time | 4 hours |
| Charging System | USB-C (1 A) |
| Charging time | 2 hours |
| External power supply operation | 5 V, USB-C |
| Operating temperature range | -10 ~ 50°C (14 ~ 122°F) |
| Storage temperature range | -40 ~ 70°C (-40 ~ 158°F) |
| Encapsulation | Camera housing and lens: IP54 (IEC 60529) |
| Drop test | Designed for 2 meters (6.6 feet) |
| Weight (with battery) | 0.19 kg (0.42 lb) |
| Dimensions (length x width x height) | 138 × 84 × 24 mm |
Product warranty: 1 year warranty
Note: Imported from Taiwan original factory
※Please note:
Thermal imagers can only see the surface of objects and cannot see through walls .
Thermal imagers convert thermal radiation from objects into light signals and form images. They observe temperature differences on the surface of objects and display them on the screen , providing signs that are invisible to the naked eye for operators to make judgments. If the temperature difference is not too large, it cannot be clearly displayed .
Except for thermal imagers approved by the military, ordinary thermal imagers cannot penetrate walls or objects.
產品特色：
- 精準光學物距比： 12:1 黃金比例（D:S），距離目標 36 公分即可精準測量直徑 3 公分的範圍。
- 專業可調發射率： 具備 0.1 ~ 1.0 發射率調整功能（預設 0.95），可針對不同材質（如木材、水、混凝土）精準校正，告別測量誤差。
- 雷射輔助瞄準： 內建雷射光點（可自由開關），幫助快速且準確地鎖定測量位置。
- 直覺式一鍵測量： 按下板機即可開機測量，放開後螢幕自動鎖定最後數值（HOLD 功能），方便讀取記錄。
- 智慧節能設計： 閒置超過 15 秒即自動關機，延長電池壽命。
- 雙溫標切換： 支援攝氏 (°C) 與華氏 (°F) 單位一鍵切換，滿足不同工作需求。
產品規格：
- 測量範圍： -50°C ~ 550°C
- 測量精準度：≥ 100°C 時，誤差為 ±2% / ≤ 100°C 時，誤差為 ±2°C
- 距離與測量點比 (D:S)： 12:1
- 放射率 (Emissivity)： 0.1 ~ 1.0 可調（預設值為 0.95）
- 電源供應： AAA (4號) 電池 x 2 顆
警告：
- 雷射安全： 本產品內建 Class II 雷射。嚴禁將雷射光直射眼睛，或透過任何反射面（如鏡子、光滑金屬）照射眼睛，以免造成視力損害。
- 嚴禁浸水： 機身僅可用微濕的布擦拭，絕對不可以將整台測溫槍浸泡在水中。
- 鏡頭清潔禁忌： 感測鏡頭極為精密，只能使用吹塵球吹去灰塵，或用微濕的棉花球輕輕擦拭，嚴禁使用任何化學溶劑。
備註：
- 金屬測量盲區： 光亮的金屬表面（如鋁、銅、不鏽鋼）反光率高，會影響紅外線測量準確性。
- 無法穿透玻璃： 紅外線無法穿透透明物體。若隔著玻璃測量，測得的數值將是「玻璃表面」的溫度，而非對面的物體。
- 環境干擾因素： 測量環境若有濃密的蒸氣、灰塵或煙霧，會遮蔽紅外線傳導，進而影響測量的準確度，請盡量避開此類環境。
- 低電量提示： 當螢幕顯示電量符號時，代表電池即將耗盡，請提前備妥並更換電池。
50M Laser Distance Meter Infrared Electronic Scale Distance Meter (BI-LDM-050)
NT$1,350
Unit price per50M Laser Distance Meter Infrared Electronic Scale Distance Meter (BI-LDM-050)
NT$1,350
Unit price per- 50M laser rangefinder, accurate measurement, wide range of applications
- Pocket size, easy to carry
- The laser rangefinder has an angle measurement function. When performing a groove measurement, just select a point to measure.
- Automatic power-off function, power display
- Laser distance meter can measure length, area, volume, hypotenuse, height, and Pythagorean measurement
- Infrared electronic ruler distance meter, switchable units: meters, feet, inches, bench feet, square meters
- 10 groups of memory storage
- Soft buttons, anti-slip and easy to hold
- IP54 dustproof and water-proof rating
Product specifications:
| Function | illustrate |
| Measuring range | 0.05-50M |
| Measurement accuracy | ±2mm |
| unit of measurement | m, in, ft, ft/in, feet, pings |
| Laser wavelength | 620-690nm |
| Laser level | second level |
| Laser power | ≤1mW |
| temperature range | 0℃~40℃ |
| Dust and water resistance | IP54 |
| size | 119x49.5x22mm |
| weight | 68g |
Showing 40/40