• No special equipment is required and can be used indoors or outdoors.
• Simple operation and easy to use.
• Micro-defects that are difficult to detect with the naked eye can also be highlighted by the bright red color, so it is easy to find scars and avoid mistakes in color inspections.
• There is no restriction on the material, shape and completion status of the object. (Except coated surfaces and plastics)
• In spray form, it is easy to use and easy to carry.
• Safe for use on the most corrosive aluminum and magnesium alloys.
• As long as it is not erased, the inspection results can be saved.
• Inspection can be carried out at room temperature to 80°C.
• Inspection is carried out at -10℃ to 50℃, and the detection sensitivity is 1μm width and 10μm depth.

Product Usage:

It can be used for all metal materials such as iron, non-ferrous, magnetic and non-magnetic, as well as non-metallic materials such as porcelain and glass.

• Cast parts: pinholes, shrinkage cracks
• Forging part: Forging cracks
• Welding parts: cracks, holes, poor joints, penetration defects
• Fatigue phenomena of metal materials: grinding cracks, burning cracks, cutting cracks
• Defect inspection: drums, boilers, pipes, etc.
• Strip Inspection: Strip Inspection of Hot Spot Packaging Materials

Instructions:

The dye penetration flaw detection method is to soak the defective part of the surface of the item to be inspected with a red penetrating liquid, then use a cleaning solution to remove the red penetrating liquid, and then use a white developer to create a capillary image, so that the defective part is soaked in red. The fluid develops color, allowing defects that are invisible to the naked eye to be discovered.

The inspection method specifically refers to the following four basic steps:

Product specifications:

Cleaning fluid:
- Appearance: colorless transparent liquid
- Operating temperature range: 0~60℃
- Content volume: 420ml
- Quantity: 2 cans

Soaking fluid:
- Appearance: red liquid
- Operating temperature range: 0~80℃
- Content volume: 420ml
- Quantity: 1 can

Developer:
- Appearance: White powder coating
- Operating temperature range: 0~50℃
- Content volume: 420ml
- Quantity: 1 can

Originally imported from Japan ICHINEN CHEMICALS Company, Lubricating 303 anti-rust lubricating penetrating agent (penetrating anti-rust lubricating oil/anti-rust lubricant) has anti-rust, lubrication, penetrating and other functions. The 2-purpose nozzle cover design has good rust resistance and permeability, and has low odor. It is no problem to spray upside down.

Product Features:

• Originally imported from Japan's ICHINEN CHEMICALS company, Lubricating 303 anti-rust lubricating penetrating agent has good rust resistance and permeability.
• Lubricating 303 anti-rust lubricating penetrating agent can quickly penetrate the corroded metal surface and exert a lubricating effect on the rusted metal bottom layer.
• Lubricating 303 anti-rust lubricating penetrating agent is sprayed on rusted bolts and nuts, which can penetrate immediately and operate easily.
• Low odor type to reduce unpleasant odors at work
• Unique dual-purpose cap design, no need to replace nozzles
• Penetrating anti-rust lubricant can be sprayed upside down, making it easy to spray even in small areas

Anti-rust and lubrication performance tests under different environments: 

Product Usage:

• Anti-rust, lubrication and penetration of automobiles, motorcycles, bicycles and mechanical parts

internal volume:

• 420ml

ICHINEN CHEMICALS CO., LTD. JIP130 ultra-durable rust-proof galvanized paint is a spray product made of single-liquid concentrated zinc and epoxy resin paint, which is anti-rust and super durable.

Concentrated galvanizing anti-rust agent anti-rust paint uses ultra-fine powdered metallic zinc to prevent iron corrosion in an electrically scientific and chemical manner. At the same time, a gradually stable insoluble protective film will be formed on the surface of the zinc powder, thereby increasing the anti-corrosion performance, even if the metal surface has been If there are scratches, you can also use this product to prevent rust and corrosion.

feature of product:

• Japan's ultra-durable anti-rust galvanized paint (concentrated galvanized anti-rust agent anti-rust paint, cold galvanized agent anti-rust spray paint)
• Super durable anti-rust galvanized paint, galvanized anti-rust paint, anti-rust and anti-corrosion
• Concentrated galvanizing anti-rust agent and anti-rust paint are easily adsorbed on the base metal
• Can be used to protect metal surfaces even if they are scratched or damaged
• Cold galvanizing agent anti-rust spray paint salt spray anti-rust test up to 500 hours, good anti-rust effect
• After the Japanese ultra-durable anti-rust galvanized coating is applied, any paint or coating can be applied. However, "phthalic acid" paint may cause delamination, so please do not use it.

Product specifications:

• Capacity 450g
• Color: silver gray

Performance/Characteristics::

• Metal powder in dry coating: 84% or more
• Soaked in tap water: more than 1 year
• Outdoor rust prevention: more than 2 years
• Drying time: Touch dry: About 5 minutes based on 20 degrees C / Curing and drying: 7 hours
• Salt spray anti-rust test: more than 500 hours (generally about 250 hours on the market)
• Film thickness: 15~25μm (this is the basis for one coating, and may vary depending on coating speed, distance, etc.)
• Coating area: 0.4~0.6m2 (calculated based on film thickness 30-40μm, there will be differences depending on the coating)

use:

• Cold galvanizing agent anti-rust spray paint is used for galvanizing repairs, primer anti-rust for welding parts, and anti-corrosion for steel pipes
• Suitable for oil drilling equipment, chemical industry, ship power equipment, car body manufacturing, storage tanks, bridges, harbor mechanical facilities, terminal equipment, railway equipment, buildings, vehicles, agricultural machinery, chemical instrumentation, etc.

Operating temperature range:

• Heat resistance ( short time ) : 180 ℃
• Heat resistance ( long time ) : below 150 ℃

Rust removal, lubrication, and rust prevention can be completed in one go~

Japan Co., Ltd.'s イチネンケミカルズJIP130 ultra-durable anti-rust galvanized coating and Lubricating 303 anti-rust lubricating agent can prevent micro-degeneration and prevent rust from harming the human body and objects!

ICHINEN CHEMICALS CO.,LTD. JIP694 super powerful rust remover is a metal rust remover and rust removal water . It is suitable for metal rust removal. It has good rust removal effect and can extend the use of components. longevity and ease of use.

feature of product:

• After soaking rusty metal or metal parts in JIP694 super powerful rust remover for a few minutes, the rust on the surface will fall off.
• Rust can be easily removed by just soaking, excellent rust removal effect

Product Usage:

• Suitable for rust removal on metals, not suitable for non-metallic materials and surfaces
• Suitable for removing oxidative films formed by concrete, lime, calcium deposits, etc. attached to metal surfaces

Instructions:

1. After spraying evenly on the rusted area, let it sit for a few minutes.
2. Wipe with a rag to remove rust.
3. For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
4. After rust removal, please clean the surface with water.
5. After rust removal, be sure to perform rust prevention treatment. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.

How to deal with severe rust:

1. Using a tool such as a steel brush, pour the rust remover onto the container, and then use the brush to brush the rusted surface.
2. After applying the rust remover, it is necessary to allow the rust remover to take effect. The leaving time should not exceed 10 minutes, otherwise the rust removal reaction will cause normal parts to be corroded as well.
3. Use a steel brush to remove rust spots on the surface.
4. For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
5. After rust removal, please clean the surface with water.
6. After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.

Product specifications:

• Capacity 500ml