Skip to content

社群帳號登入綁定即享 $300 購物金,結帳自動折抵

直接點產品分類中的■系列名稱,即可一次觀看全品項

綁定會員完成生日填寫即領10%折價券(不限金額)

百利世貿易有限公司
0
  • 首頁
  • 近期新品
  • 官網限定優惠
  • 產品分類
  • 企業採購
  • 關於我們
  • 維修保固
  • 訂單查詢

Item added to cart

We use cookies and similar technologies to provide the best experience on our website. 

Home › Drilling machine accessories

8 products

Submersible water pump (EBPS80)
Submersible water pump (EBPS80)
Submersible water pump (EBPS80)

Submersible water pump (EBPS80)

136000

NT$1,360

Submersible water pump (EBPS80)

136000

NT$1,360

  • Submersible pump (submersible pump, submersible motor, pumping motor, general drainage pump)
  • Full plastic steel exterior, no rust or water produced
  • Lightweight design and high maneuverability
  • Ultra-low water inlet, only 3mm of residual water remains
  • Anti-UV plastic steel material, can be used in outdoor exposure environment for a long time
  • Plug in the PIN power cord, effectively isolate water vapor and easy to replace
  • Can be used with drilling machines or independently used for water pumping operations such as gardening, fish tank water changes, and water accumulation.
  • Powerful motor for high-load line equipment, automatic power-off device for low water level and overheating
  • Ball bearing design, durable during high-speed operation
  • Mechanical shaft seal, shockproof, and protective cover protect the wire device and prevent it from being immersed in water when placed under water.
  • Made in Taiwan

Application scope:

  • Multifunctional application in horticulture (non-24-hour continuous operation)
  • Gardening and farming irrigation
  • Wastewater discharge from small cesspools (tanks)
  • Temporary wastewater or stagnant water discharge after rain
  • A good helper for water tower cleaning
  • Fish tank water change and cleaning
  • Cleaning of automobiles and motorcycles

46887062896916
4" drilling machine diamond drill bit set three-section diamond tube set hole cleaning cutter (GB00181)
三節式鑽石管組 洗孔刀 適用於鑽孔機 洗孔機
18mm 台灣製造洗洞機鑽孔機洗孔機用三節式鑽石管組 洗孔刀 鑽石頭 中接管 接頭

4" drilling machine diamond drill bit set three-section diamond tube set hole cleaning cutter (GB00181)

163000

From NT$1,630

4" drilling machine diamond drill bit set three-section diamond tube set hole cleaning cutter (GB00181)

163000

From NT$1,630

The three-section diamond tube group hole cleaning cutter is suitable for drilling machines (hole cleaning machines). It has extremely high wear resistance and cutting force. It is suitable for drilling holes in various hard materials. It is widely used in construction, engineering and other fields. It is an ideal choice for professional tools.

Product Features:

  • Taiwan-made diamond drill bit set for drilling machines, suitable for drilling, cleaning holes and washing holes
  • The drill bit is made of high-hardness diamond welding, which has high hardness, fast cutting speed, high stability, wear resistance, saving working hours, improving machine efficiency and reducing losses.
  • Hollow drill bit, can drill through reinforced concrete, marble, natural stone or tile

Specifications:

model Specifications and dimensions (mm) Diamond drill bit + middle pipe + joint (mm)
caliber Outside diameter Inner diameter Drilling depth full length
GB00181 18 18.0 9.0 310 395
GB00251 25 25.0 16.0 310 395
GB01001 1" 28.1 19.1 310 395
GB01251 1 1/4" 33.7 24.7 315 400
GB01501 1 1/2" 41.1 32.1 305  
GB02001 2" 53.2 44.2 345  
GB02501 2 1/2" 64.8 55.8   410
GB03001 3" 77.6 68.6 350  
GB03501 3 1/2" 90.1 81.1    
GB04001 4" 110.4 100.4 380 440
GB05001 5" 128.4 118.4 400 460
GB06001 6" 160.4 150.4    
  • GB model is suitable for 4" drilling machine, with middle connecting rod length 250mm, joint length 85mm, thread diameter 1"
  • GC model is suitable for drilling machines above 6", with a middle connecting rod length of 300mm, a joint length of 85mm, and a thread diameter of 1 1/4"

👉 Suitable for drilling machines over 6 inches: Three-section diamond tube set hole cleaning knife hole cleaning knife diamond drill tube suitable for drilling machines/hole cleaning machines over 6 inches

※ For other sizes and specifications, please call us for more information

46849089765652
Three-section diamond tube set hole cleaning knife hole cleaning knife diamond drill tube is suitable for drilling machine/hole cleaning machine above 6 inches (GC00181)
三節式鑽石管組 洗孔刀 適用於鑽孔機 洗孔機
18mm  三節式鑽石管組 洗孔刀 洗洞刀 鑽石頭 鑽石鑽管 鑽石鑽頭組 適用於6吋以上鑽孔機/洗孔機

Three-section diamond tube set hole cleaning knife hole cleaning knife diamond drill tube is suitable for drilling machine/hole cleaning machine above 6 inches (GC00181)

163000

From NT$1,630

Three-section diamond tube set hole cleaning knife hole cleaning knife diamond drill tube is suitable for drilling machine/hole cleaning machine above 6 inches (GC00181)

163000

From NT$1,630

The three-section diamond tube set is an efficient tool designed for drilling machines/hole washing machines larger than 6 inches. It has a hole washing knife function and can quickly wash holes. The structure is stable and can effectively improve the drilling speed and cleaning effect. It is widely used in construction, exploration and other industries to ensure smooth operation.

Product Features:

  • Taiwan-made diamond drill bit set for drilling machines, suitable for drilling, cleaning holes and washing holes
  • The drill bit is made of high-hardness diamond welding, which has high hardness, fast cutting speed, high stability, wear resistance, saving working hours, improving machine efficiency and reducing losses.
  • Hollow drill bit, can drill through reinforced concrete, marble, natural stone or tile

Specifications:

model Specifications and dimensions (mm) Diamond drill bit + middle pipe + joint (mm)
caliber Outside diameter Inner diameter Drilling depth full length
GC00181 18 18.0 9.0 360 460
GC00251 25 25.0 16.0 360 460
GC01001 1" 28.1 19.1 360 460
GC01251 1 1/4" 33.7 24.7 365 465
GC01501 1 1/2" 41.1 32.1 355  
GC02001 2" 53.2 44.2 395  
GC02501 2 1/2" 64.8 55.8   475
GC03001 3" 77.6 68.6 400  
GC03501 3 1/2" 90.1 81.1    
GC04001 4" 110.4 100.4 430 505
GC05001 5" 128.4 118.4 450 525
GC06001 6" 160.4 150.4    
  • GC model is suitable for 4" drilling machine, middle connecting rod length 250mm, joint length 85mm, thread diameter 1"
  • GC model is suitable for drilling machines above 6", with a middle connecting rod length of 300mm, a joint length of 85mm, and a thread diameter of 1 1/4"

👉Products suitable for 4-inch drilling machines : 4" drilling machine diamond drill bit set three-section diamond tube set hole cleaning cutter

※ For other sizes and specifications, please call us for more information

46849525711124
Integrated thin tube diamond drill bit set for 4" drilling machine (GBT-01500)
Integrated thin tube diamond drill bit set for 4" drilling machine (GBT-01500)

Integrated thin tube diamond drill bit set for 4" drilling machine (GBT-01500)

217000

From NT$2,170

Integrated thin tube diamond drill bit set for 4" drilling machine (GBT-01500)

217000

From NT$2,170

  • One-piece thin-tube diamond drill bit set (thin-walled diamond hollow drill bit set, diamond head set, concrete hole opener) made in Taiwan
  • Welded with high-hardness Japanese artificial diamonds, the thin tube is designed to be integrally formed to reduce resistance and increase drilling speed, making it faster and faster.
  • Suitable for concrete drilling machine, cement hole washing machine and hole washing machine

Product specifications:

Product number diameter
GBT-01500 1.5"
GBT-02000 2.0"
GBT-02500 2.5"
GBT-03000 3.0"
GBT-03500 3.5"
GBT-04000 4.0"
GBT-05000 5.0"
46886288195860
Integrated thin tube diamond drill bit set for drilling machines above 6" (GCT-01500)
Integrated thin tube diamond drill bit set for drilling machines above 6" (GCT-01500)

Integrated thin tube diamond drill bit set for drilling machines above 6" (GCT-01500)

217000

From NT$2,170

Integrated thin tube diamond drill bit set for drilling machines above 6" (GCT-01500)

217000

From NT$2,170

  • One-piece thin-tube diamond drill bit set (thin-walled diamond hollow drill bit set, diamond head set, concrete hole opener) made in Taiwan
  • Welded with high-hardness Japanese artificial diamonds, the thin tube is designed to be integrally formed to reduce resistance and increase drilling speed, making it faster and faster.
  • Suitable for concrete drilling machine, cement hole washing machine and hole washing machine

Product specifications:

Product number diameter
GCT-01500 1.5"
GCT-02000 2.0"
GCT-02500 2.5"
GCT-03000 3.0"
GCT-03500 3.5"
GCT-04000 4.0"
GCT-05000 5.0"
GCT-06000 6.0"
GCT-07000 7.0"
GCT-08000 8.0"
GCT-09000 9.0"
GCT-10000 10.0"
GCT-12000 12.0"
GCT-14000 14"
46886320996628
Special extension rod for drilling machine (GB00-200-6N)
Special extension rod for drilling machine (GB00-200-6N)

Special extension rod for drilling machine (GB00-200-6N)

79500

From NT$795

Special extension rod for drilling machine (GB00-200-6N)

79500

From NT$795

  • Special extension rod for drilling machine made in Taiwan
  • Drill bit extension for drilling machine, used to extend the drilling depth

Product specifications:

Product number Applicable drilling machine size Length(mm) Outer diameter(mm)
GB00-200-6N 6" and above 200 40.5
GB00-300-6N 6" and above 300 40.5
GB00-500 6" and above 500 40.5
GB00-250-5V 4" 250 38.0
46886719455508
4-inch water collection tray for drilling machine (GD05007-50)
4-inch water collection tray for drilling machine (GD05007-50)

4-inch water collection tray for drilling machine (GD05007-50)

77000

NT$770

4-inch water collection tray for drilling machine (GD05007-50)

77000

NT$770

  • Special water collection tray for drilling machines (drainage tray, water processor) made in Taiwan
  • 4" drain pan covered with high density rubber
  • Used with a drilling machine, sewage is not easy to splash out and is easy to recycle.
  • The main body is reinforced plastic, not easy to break

Product specifications:

model length outer diameter Applicable drilling machine size
GD05007-50 1"-4" 208mm 4" drilling machine

Product Usage:

  • Direct the downward flowing liquid into the area surrounded by the water collection pan and discharge it through pipelines to avoid polluting the workplace.
46886780502292
Fixing screw set for 4-inch drilling machine (GD00-02)
Fixing screw set for 4-inch drilling machine (GD00-02)

Fixing screw set for 4-inch drilling machine (GD00-02)

9500

NT$95

Fixing screw set for 4-inch drilling machine (GD00-02)

9500

NT$95

  • Fixing screw set for 4-inch drilling machine made in Taiwan
  • Special accessories for 4-inch drilling machine
  • Contains screw x2 / gasket x2 / nut x2
46886825492756

訂閱百利世電子報

聯絡我們

展示中心

台北市大安區建國南路一段304巷8號

服務時段:周一至周五 8:30-17:30

(02)2702-2266

LINE線上客服

@Panrico

服務條款

  • 服務條款
  • 隱私權保護政策
  • 退換貨政策
  • 運送政策
  • 企業採購
  • Oversea Trading

© 2026,

百利世貿易有限公司.
    • Choosing a selection results in a full page refresh.
    • Opens in a new window.