Sort by:
723 products
723 products
JIP612 water leakage detection fluid, water leakage detection agent, is a water leakage detection dye. It can detect water leakage areas through the white coating film. It can only be applied on the outside and will not stain the inside.
Product equality:
- Original imported from ICHINEN CHEMICALS CO., LTD., JIP612 water leakage detection fluid
- Detect water leakage dye and find the leakage area through the change of white coating film
- Water leakage detection agent can only be applied on the outside and will not stain the inside.
- Can be cleaned by washing after inspection
Scope of application:
- Check water leakage by hydraulic pressure test of water tanks, etc.
- Check for leaks in pipes and containers
Performance/Characteristics:
- Appearance (after drying): white powder coating
- Operating temperature range: 0-50℃
capacity:
420ml
JIP659 oil leakage detection fluid can easily detect oil leakage. It only needs to be applied externally and will not stain the inside.
feature of product:
- JIP659 Oil Leak Check Fluid
- Oil leaks can be easily detected through the white coating film
- It can suck out liquids and perform inspections without pressurization.
- Only the outside is coated and the inside will not be stained
- Can be cleaned by washing after inspection
- Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.
Scope of application:
- Detect oil leakage from welded parts and joints of various oil piping (also applicable to rubber pipes)
- Found oil leakage in welded parts and joint parts of various oil tanks
- Detect oil leakage from the fuel tank joints and brake hose piping parts of automobiles, etc.
Performance/Characteristics:
- Appearance (after drying): white powder coating
- Operating temperature range: 0-50℃
capacity:
- 150ml
ICHINEN CHEMICALS CO.,LTD. JIP694 super powerful rust remover is a metal rust remover and rust removal water . It is suitable for metal rust removal. It has good rust removal effect and can extend the use of components. longevity and ease of use.
feature of product:
- After soaking rusty metal or metal parts in JIP694 super powerful rust remover for a few minutes, the rust on the surface will fall off.
- Rust can be easily removed by just soaking, excellent rust removal effect
Product Usage:
- Suitable for rust removal on metals, not suitable for non-metallic materials and surfaces
- Suitable for removing oxidative films formed by concrete, lime, calcium deposits, etc. attached to metal surfaces
Instructions:
- After spraying evenly on the rusted area, let it sit for a few minutes.
- Wipe with a rag to remove rust.
- For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
- After rust removal, please clean the surface with water.
- After rust removal, be sure to perform rust prevention treatment. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.
How to deal with severe rust:
- Using a tool such as a steel brush, pour the rust remover onto the container, and then use the brush to brush the rusted surface.
- After applying the rust remover, it is necessary to allow the rust remover to take effect. The leaving time should not exceed 10 minutes, otherwise the rust removal reaction will cause normal parts to be corroded as well.
- Use a steel brush to remove rust spots on the surface.
- For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
- After rust removal, please clean the surface with water.
- After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.
Product specifications:
- Capacity 500ml
JIP695 immersion rust remover 4L comes with rust removal steel brush (DJ-0695-40004)
NT$4,675
Unit price perJIP695 immersion rust remover 4L comes with rust removal steel brush (DJ-0695-40004)
NT$4,675
Unit price perICHINEN CHEMICALS CO.,LTD. JIP695 immersion rust remover is a metal rust remover and rust removal water . It is suitable for metal rust removal. It has good rust removal effect and can extend the service life of components. and ease of use. It can also be used as a supplement to JIP694 super powerful rust remover .
feature of product:
- After soaking rusty metal or metal parts in JIP695 immersion rust remover for a few minutes, the rust on the surface will fall off.
- Rust can be easily removed by just soaking, and the rust removal effect is excellent.
Product Usage:
- Suitable for rust removal on metals, not suitable for non-metallic materials and surfaces.
- It is suitable for removing the oxidative film formed by concrete, lime, calcium deposits, etc. attached to the metal surface.
Instructions:
- After spraying evenly on the rusted area, let it sit for a few minutes.
- Wipe with a rag to remove rust.
- For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
- After rust removal, please clean the surface with water.
- After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.
How to deal with severe rust:
- Using a tool such as a steel brush, pour the rust remover onto the container, and then use the brush to brush the rusted surface.
- After applying the rust remover, it is necessary to allow the rust remover to take effect. The leaving time should not exceed 10 minutes, otherwise the rust removal reaction will cause normal parts to be corroded as well.
- Use a steel brush to remove rust spots on the surface.
- For long-term rust spots, treatment can be performed multiple times depending on the thickness of the rust spots.
- After rust removal, please clean the surface with water.
- After rust removal, rust prevention treatment must be performed. It can be used with JIP130 ultra-durable anti-rust galvanized paint for better results.
Product specifications:
- Capacity 4L
KLIN WELD SE-F ethylbenzene-free welding groove rust inhibitor silver type (DJ-20355-42012)
NT$1,430
Unit price perKLIN WELD SE-F ethylbenzene-free welding groove rust inhibitor silver type (DJ-20355-42012)
NT$1,430
Unit price perWelding groove rust inhibitor:
Applied to all types of steel groove surfaces to avoid rust during welding.
Rust at the welding groove will lower the commercial value of the steel and cause various problems such as welding defects. From bevel processing to welding construction, using KLIN WELD SE-F bevel anti-rust agent can effectively solve these problems.
Generally, anti-rust agent is applied to the groove, and the anti-rust agent needs to be removed before welding. Using KLIN WELD SE-F groove anti-rust agent product, you can directly weld and reduce the operating procedures.
Product Features:
- Weld anti-rust, silver type
- Ethylbenzene-free type
- Can be directly welded
Performance/Characteristics:
- Coating: silver
- Dry to the touch: about 3 minutes
- Film thickness: 5-12µm
- Outdoor exposure test: 3-6 months
- Viscosity: 12±1 seconds (FC No.4)
- Coating area of 1L: 15-25m 2
capacity:
420ml
KLIN WELD YE welding groove rust inhibitor transparent type (DJ-20435-42012)
NT$1,470
Unit price perKLIN WELD YE welding groove rust inhibitor transparent type (DJ-20435-42012)
NT$1,470
Unit price perWelding groove rust inhibitor:
Applied to all types of steel groove surfaces to avoid rust during welding.
Rust at the welding groove will lower the commercial value of the steel and cause various problems such as welding defects. From bevel processing to welding construction, using KLIN WELD YE bevel anti-rust agent can effectively solve these problems.
Generally, anti-rust agent is applied to the groove, and the anti-rust agent needs to be removed before welding. Using KLIN WELD YE groove anti-rust agent product, you can directly weld and reduce the operating procedures.
Product Features:
- Can be directly welded
- Can be repainted
- The groove can be seen from above the coating film
Performance/Characteristics:
- Coating film: transparent
- Dry to the touch: about 20 minutes
- Film thickness: 5-7µm
- Exposure test: 1-2 months
- Viscosity: 11±1 seconds (FC No.4)
- Coating area of 1L: 15-25m 2
capacity:
420ml
Excellent design ~ 3-in-1 LED rechargeable flashlight assembly, compact body, multi-functional lamp head
An amazing life helper ~ 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light, with a maximum brightness of up to 1000 lumens, and equipped with 3 quick connection systems, allowing you to easily replace the lamp head for easy use Choose between flashlights, long foldable work lights and snake tube lights.
The 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light uses a 4000mAh lithium battery and supports USB-C charging, so you don’t have to worry about battery problems. Whether it is car repair, home lighting, camping or outdoor activities, this flashlight can perfectly meet the needs of various occasions.
Whether you need a flashlight with excellent lighting effects, a long foldable work light that can provide a wide range of lighting, or even a flexible snake light, this 3-in-1 multi-functional LED rechargeable flashlight set + folding work light +Snake tube lights can meet your needs.
This 3-in-1 multifunctional LED rechargeable flashlight set + folding work light + snake tube light has a unique design that combines lightweight portability and versatility. Whether indoors or outdoors, you can easily meet the lighting needs of various occasions. Let this kit become an indispensable assistant in your life, bringing you convenience and safety.
feature of product:
Aluminum alloy + strong magnetic base
The lightweight aerospace aluminum alloy body is equipped with one-touch buttons for simple and easy control. The strong magnetic design of the base of the fuselage makes it easy to adsorb on any metal surface.
Reversible and foldable work light
The COB lamp panel has a double-joint design and can be folded and flipped 360°. The lamp head can be flexibly rotated 360° to achieve multi-angle lighting .
zoom flashlight
Supports variable zoom function, the maximum brightness can reach 1000 lumens. You can easily adjust from a wide-angle floodlight to a narrow-focus beam for wide coverage or focused illumination of a specific area.
Double magnetic snake tube lamp
It adopts a flexible gooseneck design that can be bent around obstacles to facilitate access to narrow spaces for lighting. The head has a magnetic suction function, which makes it easy to absorb and pick up fallen small parts in narrow places.
Product Features:
- 3 quick connectors provide different adjustable LED light outputs
- The strong magnetic design of the base of the fuselage makes it easy to adsorb on any metal surface.
- Aerospace aluminum alloy body allows it to withstand wear and tear
- Up to 1000 lumens maximum brightness
- The lamp head of the snake tube lamp is magnetic, which can absorb and pick up small fallen parts in small spaces.
- Using 21700 battery 4000Ah lithium battery, Type-C charging mode
Instructions:
1. In the off state, long press for 2 seconds to turn on, short press to switch between high, medium and low modes, and long press for 2 seconds to turn off.
2. In any state, press twice to enter flashing mode, short press to exit.
3. In any state, press 3 times to enter SOS mode, press briefly to exit.
4. In the off state, press 5 times in a row to enter the tactical mode. Press and hold to light up. If you don’t press it, it will not light up. Press 5 times in a row to exit the tactical mode.
- Made in Taiwan, European style L -shaped hexagonal star wrench set
- Made of chromium-molybdenum steel with high torque and can lock objects correctly
- L-shaped long and short body, suitable for various spaces
- Ergonomically designed handle, convenient, comfortable and neat
- Single-sided short arm design, easy to operate, ideal for small spaces
Product specifications:
| Product number | Specifications (mm) | ||
|---|---|---|---|
| Hex Head | handle body | full length | |
| FM876000 | T10~T50 (with rack) | ||
| FM876005 | T5 | 100 | 140 |
| FM876006 | T6 | 100 | 140 |
| FM876010 | T10 | 100 | 140 |
| FM876015 | T15 | 100 | 140 |
| FM876020 | T20 | 100 | 142 |
| FM876025 | T25 | 100 | 155 |
| FM876027 | T27 | 100 | 160 |
| FM876030 | T30 | 150 | 170 |
| FM876040 | T40 | 150 | 185 |
| FM876045 | T45 | 150 | 210 |
| FM876050 | T50 | 150 | 240 |
Mungo 4100 crack sealing epoxy resin (Epoxy) is a paste, two-liquid type, epoxy resin used for filling gaps between concrete or other objects. It has good sealing properties.
The structural system of the building loses part of its seismic resistance due to damage from earthquake forces. If the section is not reinforced and repaired, stress concentration will form on the original fractures during another earthquake, which will intensify the damage and reduce safety.
Mungo 4100 crack sealing epoxy resin is used to repair and reinforce cracks in concrete structures if low-pressure pouring is used to pre-treat minor cracks in the structure. It is necessary to first use Mungo 4100 crack sealing epoxy resin to install the injection base and fix it on the concrete surface. Then the surface of the crack must be sealed and sealed so that the injected Mungo 4200 crack filling epoxy resin (Epoxy) can be poured later. ) will not be lost, and can fully exert the reinforcing effect, restore the integrity of the structure, and achieve the purpose of integration.
feature of product:
- Crack sealing epoxy resin (Epoxy, crack sealing artificial resin, crack sealing artificial resin, crack sealing resin glue)
- Crack sealing epoxy resin (Epoxy) is a paste, two-liquid type, epoxy resin used for filling gaps between concrete or other objects. It has good sealing properties.
Product performance :
| A (main ingredient) | B(hardener) | |
| Exterior | white paste | light gray paste |
| main ingredient | Epoxy resin | Denatured polyurethane |
| viscosity | paste | paste |
| Solid content | More than 98% | More than 98% |
| Mixing ratio (weight) | 1 | 1 |
| Available time | 40 minutes | |
| Initial hardening time | 6 hours | |
| Full hardening time | 7th | |
Product Usage:
- Sealing (sealing) of gaps between concrete surface, concrete surface and metal plate, concrete surface and stone, gypsum board and concrete, etc.
Product capacity:
- Mungo 4100 A agent 3kg (main agent)
- Mungo 4100 B agent 3kg (hardener)
From NT$3,215
Unit price perThe structural system of the building loses part of its seismic resistance due to damage from earthquake forces. If the section is not reinforced and repaired, stress concentration will form on the original fractures during another earthquake, which will intensify the damage and reduce safety.
Mungo 4200 crack-injecting epoxy resin (Epoxy) is a low-viscosity, two-liquid, room-temperature curing epoxy resin-infused repair material that has been widely used for repairing and reinforcing cracks in concrete structures. This injection resin does not contain solvents, has little shrinkage after hardening, and has excellent adhesion to various structures. With the mechanical infusion method (high-pressure infusion) or the syringe injection method (low-pressure infusion), fine cracks in the structure can be repaired. Give full play to the effect of reinforcement, restore the integrity of the structure, and achieve the purpose of integration.
Crack pouring epoxy resin is mostly used for low-pressure crack pouring and reinforcement. Its purpose is to block the infiltration of air and moisture, prevent steel bars from rusting, and neutralize concrete. And the separated concrete surfaces on both sides of the crack are bonded and compounded, and the loose concrete is re-bonded to achieve a strengthening effect.
feature of product:
- Crack infusion epoxy resin (Epoxy crack infusion artificial resin, crack infusion artificial resin, crack infusion resin glue)
- Crack-injecting epoxy resin (Epoxy) is a low-viscosity, two-liquid type, room-temperature hardening epoxy resin-injected repair material that has been widely used for repairing and reinforcing cracks in concrete structures.
- It is used for pouring and reinforcing low-pressure cracks. Its purpose is to block the infiltration of air and moisture, prevent steel bars from rusting, and neutralize concrete.
- The separated concrete surfaces on both sides of the crack are bonded and compounded, and the loose concrete is re-bonded to achieve a strengthening effect.
Low pressure perfusion features:
- Using low pressure and low speed continuous injection, every detail of the crack can be reliably injected.
- The amount of injection can be visually checked and epoxy resin can be replenished at any time.
- The pressure can be flexibly adjusted.
Product Usage :
Structural elements such as reinforced concrete buildings, main towers, bridge piers, abutments, tunnels, harbors, wharves, breakwaters, dams, sand dams, short bridges, spacer beams, main beams, etc., such as building apartments, etc., have cracks with a width of more than 0.3mm. For structural cracks, epoxy resin is injected under pressure to fill the cracks to repair damaged structural elements such as beams, columns, boards and walls, and to prevent moisture from penetrating and causing corrosion of steel bars.
Product characteristics :
| A (main ingredient) | B(hardener) | |
| Exterior | colorless liquid | Light brown transparent liquid |
| viscosity | 500±200 | 300±100 |
| Mixing ratio (weight) | 2 | 1 |
| proportion | 1.05 | |
| Available time | 90 minutes | |
| Initial hardening time | 4-6 hours | |
※Set the temperature at 25 degrees C
Physical data:
| Test items | Test Methods | unit | Specification Value |
|---|---|---|---|
| Compression yield strength | ASTM D695 | Kg/cm 2 | >500 |
| Bending strength | ASTM D790 | Kg/cm 2 | >400 |
| tensile strength | ASTM D638 | Kg/cm 2 | >300 |
| Bonding strength | ASTM C882/C882M | Kg/cm 2 | >100 |
Product capacity:
- Mungo 4200 A agent 20Kg / B agent 10Kg
- Mungo 4200 A agent 8Kg / B agent 4Kg
Product Features:
- Taiwan-made injection-type anchor glue, professional steel structure reinforcement or equipment foundation fixing material
- Mungo 4300 injection anchoring glue is made of epoxy resin and is used for anchoring or chemical bonding bolts. It has strong holding power, long working time and good operability.
- The injection adhesive is quick, easy and clean to apply, shortening the construction period. Seven days after the application, the strength can reach 100% of the maximum load effect.
- Chemical Anka adhesives are fixed by adhesion, which will not damage the concrete but also strengthen it. The bond strength is greater than the raw material structure.
- Mungo 4300 injection adhesive has strong fixing force and is suitable for a variety of different substrates
- Rebar adhesive, styrene-free, no pungent odor
- The anchor glue has super strong adhesion and does not shrink
Scope of application:
- New construction without reserved steel bars, atrium gardens, railings, and wall fixings
- Secondary construction structural reinforcement, beams, columns, floor slabs, and scaffolding fixation
- Continuous wall, retaining wall, shear wall
- Used for expansion, reinforcement and repair of bridges, tunnels and houses
- Screw fixing and steel bar anchoring of heavy equipment brackets
- Bolt anchoring of roads and railroad subgrades and rebar planting of floor slabs
Installation environment:
Installation method:
Specifications:
Capacity: 360ml
Special implant injection gun:
345ml professional double liquid iron rebar glue gun
NiTex CUT5 is the most advanced wear-resistant and anti-cut gloves, which conforms to the highest protection level of European EN388 industrial gloves. It is made of breathable man-made fiber + nitrile rubber and polymer HPPE glass fiber. It has good anti-cut and anti-puncture functions, is breathable and comfortable, and can Fitted to the palm, the cut-resistant gloves have good breathability, strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, stretch-resistant, anti-cut, and have strong grip. They are ideal for your work, mountaineering, river tracing, camping, cycling, and gardening. , the best partner for warehousing and transportation.
feature of product:
The anti-cutting ability complies with the European EN388 industrial glove protection level 5, the highest level of protection.
The best-selling CUT5 wear-resistant and cut-resistant gloves from Japan and South Korea comply with the highest level of European EN388 protective gloves in terms of mechanical hazards, with a wear resistance coefficient of 4, a cut resistance coefficient of 5, a tear resistance coefficient of 4, and a puncture resistance coefficient of 4.
Highly elastic and resistant to pulling
Cut-resistant gloves are made of three major man-made fibers + nitrile rubber and polymer HPPE glass fiber. They are super elastic and can quickly return to their original length after being released, making them more durable.
High wear resistance and good anti-slip/anti-slip effect
Elastic rayon, polyester, nylon, nitrile rubber and other materials are all wear-resistant. The anti-slip surface of the anti-slip and anti-cut gloves is made of foamed NBR nitrile rubber thermoplastic. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.
Breathability
The best-selling CUT5 wear-resistant and cut-resistant gloves from Japan and South Korea are made of three major man-made fibers + polymer HPPE glass fiber, woven in an excellent proportion, making them comfortable and breathable.
Comfort and flexibility
The anti-cut, wear-resistant and stab-proof gloves fit the hand and can fit tightly into the palm. They have good hand protection and can work more flexibly and smoothly.
Washable and oil-resistant
The polyester fiber material of cut-resistant gloves has high strength, is not easy to break, is quick-drying and washable, and does not wrinkle or shrink easily after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.
Durable
The best-selling CUT5 top-grade wear-resistant and anti-cut gloves from Japan and South Korea are not only suitable for use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.
Professional OEM manufacturing
The best-selling NiTex wear-resistant and cut-resistant gloves in Japan and South Korea are professional gloves manufacturers in South Korea and OEM for many world-renowned international manufacturers. The quality of the gloves is reliable.
Scope of application:
Suitable for environments where it is easy to be cut by iron wires and sharp metal burrs.
product material:
- Spandex (elastic man-made fiber)
- Polyester(polyester fiber)
- Single Knitted with HPPE Glass Fiber (high performance polyethylene glass fiber)
- Nylon(nylon)
- Nitrile(nitrile rubber)
Elastic man-made fiber (Spandex)
Its biggest feature is its super elasticity and high deformability. It can be stretched to twice the length and can quickly return to its original length after being released. It is stronger than rubber and more wear-resistant.
Nylon fiber (Nylon)
The advantages are that it is strong, wear-resistant, smooth, light in weight, and the material is not easy to deform, pill, and age.
Polyester fiber (Polyester)
It has the characteristics of high strength, not easy to break, strong expansion and contraction, and quick drying. In terms of cleaning and storage, it also has the advantages of not easy to wrinkle, not easy to shrink, not easy to get mold, etc.
Nitrile rubber (Nitrile)
It has the advantages of high wear resistance, oil resistance, good air tightness, strong adhesion, and aging resistance.
Origin: South Korea
Specially made gloves with thick bristles can not only protect your hands in winter, but can also be used for other tasks, such as cycling, driving, carrying, fishing, mountain climbing and various leisure activities. They are elastically designed and not tight. They are the best way to keep out the cold, prevent slipping and keep warm in winter. Best choice.
The cold-proof gloves use nitrile rubber coating to fit the outer layer of the gloves. They have fine workmanship, clear coating lines, strong adhesion, and good anti-slip effect.
Thermal anti-slip gloves have good breathability, strong anti-slip (anti-slip) function, strong grip, thick bristles, comfortable wearing, and more efficient for work and leisure use.
※ Please note: Breathable thermal gloves (cold-proof gloves) are breathable gloves, not waterproof gloves. If they come into contact with water, they will absorb moisture.
Product specifications:
- Size:L
Summer lightweight anti-slip and wear-resistant gloves have good breathability, strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, pull-resistant, and have strong grip. Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.
feature of product:
Highly elastic and resistant to pulling
The lightweight, non-slip and wear-resistant gloves are made of three major man-made fibers + nitrile rubber. They are super elastic and can quickly return to their original length after being released, making them more durable.
High wear resistance and good anti-slip/anti-slip effect
All four materials have wear-resistant properties. The anti-slip surface of the anti-slip gloves is made of foamed NBR nitrile rubber and is thermoplastically bonded. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.
Breathability
Breathable non-slip work gloves are made of three major man-made fibers, woven in an optimal proportion, making them comfortable and breathable.
Comfort and flexibility
The thin, non-slip and wear-resistant gloves that are best-selling in Japan and South Korea have moderate thickness and improve the shortcomings of gloves on the market that are too thin and lack protection and are too thick and difficult to grasp. The gloves fit snugly on the hands and can fit tightly into the palms. They have good hand protection and can work more flexibly and smoothly.
Washable and oil-resistant
The polyester fiber material of the lightweight anti-slip and wear-resistant gloves is strong and not easy to break. It is quick-drying and washable. It is not easy to wrinkle or shrink after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.
Durable
Anti-slip and wear-resistant gloves are not limited to use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.
product material:
- Spandex (elastic man-made fiber)
- Polyester(polyester fiber)
- Nylon(nylon)
- Nitrile(nitrile rubber)
Elastic man-made fiber (Spandex)
Its biggest feature is its super elasticity and high deformability. It can be stretched to twice the length and can quickly return to its original length after being released. It is stronger than rubber and more wear-resistant.
Nylon fiber (Nylon)
The advantages are that it is strong, wear-resistant, smooth, light in weight, and the material is not easy to deform, pill, and age.
Polyester fiber (Polyester)
It has the characteristics of high strength, not easy to break, strong expansion and contraction, and quick drying. In terms of cleaning and storage, it also has the advantages of not easy to wrinkle, not easy to shrink, not easy to get mold, etc.
Nitrile rubber (Nitrile)
It has the advantages of high wear resistance, oil resistance, good air tightness, strong adhesion, and aging resistance.
Origin:
- South Korea
NX22 molybdenum disulfide lubricant is NX22 molybdenum disulfide lubricant. Molybdenum disulfide has good lubricity, pressure resistance and wear resistance, and is used in equipment operating under high speed, heavy load, high temperature and other working conditions.
Product Features:
- High lubrication performance can be maintained from low temperature to high temperature (-30 - 400℃)
- High load resistance and extremely low friction coefficient
- Forms a moist molybdenum disulfide film, which is chemically stable and can be used in places immersed in organic solutions or water.
- Compatible with general lubricants to improve lubrication performance
- Original imported from Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD.
Scope of application:
- Used to prevent working machinery, construction machinery, and automobile-grade crushing moving and rotating parts from burning, seizing, wear, and squeaking.
- Used to prevent malfunctions, burning and squeaking of screws when assembling machinery.
Performance/Characteristics:
- Fusion load: 2452N
- Heat resistance: 400℃
- Vibrator friction coefficient: 0.10
- Operating temperature range: -30 ~ 400℃
capacity:
300ml
NX483 automotive repair and anti-collision primer imported from ICHINEN CHEMICALS CO., LTD., Japan.
- Anti-collision primer with rubber-flexible granular coating
- Can be recoated with other paints after drying
- Excellent adhesion, water resistance, rust resistance and impact resistance
use:
Prevents scratches and damage to the car's front fenders, side skirts, door sills and other suspension devices caused by the impact of flying stones while driving.
| Technical data: |
| Drying time for 1 application (normal temperature) | Dry to touch: 20 minutes |
| Curing and drying: 1~2 hours | |
| Coating area | 1~1.5m 2 |
| Paint | Can |
color:
black
Internal capacity:
420ml
ICHINEN CHEMICALS CO.,LTD. NX5000 engine carbon cleaner is a high-efficiency foam cleaner used to clean carburetors, combustion chambers, exhaust valves, throttle valves, and piston tops due to incomplete combustion. Carbon deposits and dirt caused by this.
feature of product:
- Foaming high-efficiency dissolving technology cleans carbon deposits and dirt caused by incomplete combustion on the carburetor, combustion chamber, exhaust valve, throttle valve, and piston top
- Disassembly and washable, easy to use
- Prevent fuel system corrosion and effectively remove carbon deposits
- Reduce fuel consumption
- Improve vehicle starting and driving performance
- Cleaning every 5,000 kilometers ensures the engine works smoother
use:
- Does not corrode parts, making the engine easy to start, accelerate smoothly, increase horsepower, and save fuel
- Reduce exhaust emissions and can be applied to gasoline engine vehicles
internal volume:
- 240ml
Notice:
It is flammable, please keep away from fire or high temperature.
Not for use on 2-stroke engines and diesel vehicles (can be used for disassembly and cleaning) .
Depending on the vehicle model, use may be prohibited by the vehicle manufacturer, please follow the vehicle manufacturer's instructions .
Japan's original imported ICHINEN CHEMICALS CO., LTD. NX512 dry chain oil, water-resistant extreme pressure chain lubricant, is a white extreme pressure penetrating lubricating grease (with white solid lubricant), which has superior Water resistance and adhesion, lubrication and anti-rust effects are excellent.
feature of product:
- NX512 dry chain oil has penetrating properties and can penetrate into details
- NX512 dry chain oil, strong anti-corrosion, does not affect O-rings
- Excellent adhesion, minimal spatter, and excellent performance
- Excellent water resistance, acid resistance and alkali resistance, it can maintain its performance even if water splashes on its surface
- Good penetration spreads oil into every detail
- Because it contains white solid lubricant, it has extremely strong lubricity and can withstand pressure, and has good silencing effect during friction.
- Operating temperature range -15℃ to 120℃
- It is also possible to spray upside down, making it easy to spray even in small areas
internal volume:
- 300ml
Instructions:
- Shake your chain well before spraying it.
- Due to the low viscosity when sprayed, after spraying on high-speed rotating chains such as bicycle chains, they should be left for about 20 minutes.
- Clean the chain first if possible.
- 30-60 minutes after spraying, the lubrication will dry and show performance.
※Notice:
NX512 dry chain oil is flammable, please keep away from fire sources or high temperatures.
NX60 brake cleaner is a powerful degreasing cleaner with the best decontamination and cleaning power among spray cleaners. It is suitable for cleaning oil stains on metal parts, pipes, motors, chains, and brakes.
feature of product:
- The best detergent power among spray cleaners
- Not quick-drying, so it can penetrate oil stains and clean even small amounts
- Because the cleaning power is too strong, it is not suitable for cleaning resin, rubber products, and painted surfaces.
- It has good miscibility with glycol brake fluid, will not separate, and has good cleaning effect.
- Can also remove oil-based ink from marker pens
Scope of application:
- Clean oil stains from metal parts
- Remove oil stains from pipes, motors, etc.
- Clean the areas around the brakes of cars, forklifts, etc.
- Remove marking paint and marker pen oil-based ink from metal surfaces
- Remove oil from chains
capacity:
500ml
Originally imported from Japan's ICHINEN CHEMICALS company, this quick-drying brake and parts cleaner is a powerful metal degreasing cleaner that can quickly and safely clean disc brakes, drum brakes, brake calipers and other brake parts. It has excellent cleaning properties. Effect. Brake cleaner (brake disc cleaner) can be sprayed upside down. It has low toxicity and is not corrosive to metal. It can be safely used on brake pads, disc brake pads and brake drums. It can quickly clean metal parts, metal molds, Oil stains, grease and dirt on precision machinery, etc.
feature of product:
- Quick drying, excellent cleaning effect, low toxicity chemical detergent
- Can quickly remove oil stains, grease and dirt from metal parts, metal molds, precision machines, etc.
- Remove grease and dirt from gears, bearings, etc.
- Not corrosive to metals
Be applicable:
- Clean grease and dirt from metal parts, metal molds, tools, etc.
- Remove grease dirt from gearboxes, bearings, etc.
- Remove oil stains from hydraulic machines, cylinders, etc., remove oil stains with strips, and clean precision machines
- Clean brake pads (disc and drum), wheel cylinders, clutch discs, pressure plates, springs and other metal parts
Content volume: 500ml
Origin: Japan
- Japan Co., Ltd. ICHINEN CHEMICALS CO.,LTD. original imported NX82 heat-resistant silver heat-resistant paint heat-resistant paint, heat-resistant temperature 600℃
- Heat-resistant silver heat-resistant paint has less discoloration and will not peel off due to the thermal shock of cold water even at 600 ° C.
- High temperature resistant coatings can prevent corrosion such as salt damage
- Heat-resistant silver thermal paint When the heat-resistant paint film dries, it is heated to form a conformable hardened film.
Product Usage:
- Used for steam pipes and other parts that require heat resistance
- Used in chimneys, boilers and other equipment
- Silencer box for generators etc.
- Suitable for spraying of automobile and motorcycle exhaust pipes
Performance/Characteristics:
| Dry to the touch | 15~20 minutes |
| Harden and dry | Varies depending on heating conditions |
| heat resistance temperature | 600 ° C |
| Coating area | 0.6 ~ 0.7m 2 |
internal volume:
- 300ml
Remark:
- High-temperature resistant paint/heat-resistant paint generally refers to special functional paint that can withstand temperatures above 200 ° C for a long time and maintain certain physical and chemical properties so that the protected object can function normally in a high-temperature environment.
- Japan's ICHINEN CHEMICALS company originally imported NX86 heat-resistant black heat-resistant paint heat-resistant paint, heat-resistant temperature 600 o C
- Heat-resistant black heat-resistant paint has less discoloration and will not peel off due to the thermal shock of cold water even at 600 ° C.
- High temperature resistant coatings can prevent corrosion such as salt damage
- Heat-resistant black heat-resistant paint When the heat-resistant paint film dries, it is heated to form a conformable hardened film.
- Imported from Japan
Product Usage:
- Used for steam pipes and other parts that require heat resistance
- Used in chimneys, boilers and other equipment
- Silencer box for generators, etc.
- Suitable for spraying of automobile and motorcycle exhaust pipes
Performance/Characteristics:
| Dry to the touch | 15~20 minutes |
| Harden and dry | Varies depending on heating conditions |
| heat resistance temperature | 600 ° C |
| Coating area | 0.6 ~ 0.7m 2 |
internal volume:
- 300ml
Remark:
- High-temperature resistant paint/heat-resistant paint generally refers to special functional paint that can withstand temperatures above 200 ° C for a long time and maintain certain physical and chemical properties so that the protected object can function normally in a high-temperature environment.
日本品牌的S腰帶結合了實用性和舒適性,專為日常穿戴設計。採用高品質材料,耐磨損,適合各種工作環境。簡約的設計風格,能輕鬆搭配各種服裝,是每位使用者的理想選擇。
The best-selling P-200 thickened anti-slip gloves in Japan and South Korea have good air permeability, are wear-resistant and anti-slip work gloves, have strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, stretch-resistant, and have strong grip.
Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.
Highly elastic and resistant to pulling
Thickened anti-slip and wear-resistant gloves are made of three major man-made fibers + nitrile rubber. They are super elastic and can quickly return to their original length after being released, making them more durable.
High wear resistance and good anti-slip/anti-slip effect
All four materials have wear-resistant properties. The anti-slip surface of the anti-slip gloves is made of foamed NBR nitrile rubber and is thermoplastically bonded. The anti-slip (anti-slip) wear resistance is high and cannot be compared with ordinary coatings or smearing coatings. The nitrile rubber thermoplastic lamination layer can completely cover the palm, with good anti-slip effect and stronger grip.
Breathability
Breathable non-slip work gloves are made of three major man-made fibers, woven in an optimal proportion, making them comfortable and breathable.
Comfort and flexibility
Thick non-slip and wear-resistant gloves that are best-selling in Japan and South Korea. The gloves have a moderate thickness, which improves the shortcomings of gloves on the market that are too thin and lack protection and are too thick and difficult to grasp. The gloves fit snugly on the hands and can fit tightly into the palms. They have good hand protection and can work more flexibly and smoothly.
Washable and oil-resistant
The polyester fiber material of the thickened non-slip and wear-resistant gloves has high strength and is not easy to break. It is quick-drying and washable. It is not easy to wrinkle or shrink after washing. Nitrile rubber has good resistance to mineral oil, vegetable oil, benzene, gasoline, common dilute acids and alkalis.
Durable
Anti-slip and wear-resistant gloves are not limited to use in dry environments. After the gloves are wet and wrung out, they still maintain excellent grip even in oily working environments. The dense nitrile rubber thermoplastic laminating layer has high density, will not be punctured immediately, and has good protection.
Origin:
- South Korea
P-200 thickened anti-slip and wear-resistant work gloves (black gray) (J-GF002)
NT$100
Unit price perP-200 thickened anti-slip and wear-resistant work gloves (black gray) (J-GF002)
NT$100
Unit price perThe best-selling Nitex P-200 thickened anti-slip gloves in Japan and South Korea have good breathability and are wear-resistant and anti-slip work gloves. They have strong anti-slip (anti-slip) function, are oil-resistant, wear-resistant, and stretch-resistant. Whether you are indoors or outdoors, Nitex P-200 thickened anti-slip gloves ensure your safety and performance. Through the special anti-slip design, you can have a stable grip on wet or greasy surfaces, thereby improving work efficiency.
Thickened anti-slip and wear-resistant gloves are suitable for professional and home use. They can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction and those who need to work in Hand tools can be used for maintenance work in an oil-resistant environment. It can also be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing.
Origin: Vietnam
From NT$149
Unit price per| ● | Panrico Palm Thunder Positive Reverse Ratchet Screwdriver Adapter x Mungo 22-piece Professional Screwdriver Bit Set |
| ● | Suitable for narrow spaces |
| ● | Size suitable for aerospace, electronics, home appliances, communications, machinery |
| ● | Palm ratchet, mini design, 3cm diameter, easy to carry |
| ● | Palm ratchet with forward, reverse and locking functions |
| ● | Chrome vanadium steel 22-piece professional screwdriver bit set, can be used with any hand and power tools |
Origin:
Taiwan
The rebar anchor glue (adhesive chemical anchor/rebar anchor adhesive) is imported from the UK, with epoxy acrylate ingredients, non-toxic, odorless, and styrene-free. It is the only quick-drying rebar anchor glue introduced in Taiwan, which dries quickly, does not sag, and can be installed upside down.
ETA European Technical Approval Certification from the European Technical Approval Organization EOTA.
Product Features:
- Single tube quick-drying tropical anchor glue (chemical anchor bolt/chemical anka adhesive), economical and environmentally friendly, exclusive patented new design of replaceable agent package, no residual glue left
- Quick-drying tropical anchor glue, epoxy acrylate ingredients, styrene-free, environmentally friendly and non-toxic
- The only single-tube quick-drying anchor glue introduced in Taiwan, saving more than 1/3 of the working hours
- PEA300 adhesive chemical anchor bolt, no sag, can be installed horizontally, vertically or inverted
- Applicable to both dry and wet concrete, stable load over a long period of time in a humid environment
- High strength, strong bonding, good toughness, the effect is equivalent to pre-embedded
- Grip strength, good shock resistance, fatigue resistance and long-term stress resistance
- Good thixotropy, especially suitable for side or top surface anchoring
- Suitable for medium to high load and critical applications
- Quick-drying tropical anchor glue has good anti-aging and heat resistance, and does not creep at room temperature
- Acid, alkali and salt resistance, good earthquake resistance, fatigue resistance and long-term stress resistance
- Patented injection tube for quick-drying tropical anchor glue, which mixes the anchor glue quickly and evenly, saving time and effort
- No need to cut or slit the cover, just loosen the cover and lock the mixing tube for use
- The quick-drying anchor glue (chemical anchor bolt/chemical anka adhesive) is an exclusive patented design and can be used with a general high-quality professional silicone gun or anchor glue gun.
Scope of application:
- Expansion and modification of old buildings, industrial design changes, and other structural reinforcement
- The new construction project does not reserve steel bars, such as sky gardens, railings, walls, continuous walls, beams, columns, floor slabs, etc. Foundation bolts
- Large projects, such as public construction, civil engineering, bridges, roads, etc.
- Anchorage connection between steel structure and concrete structure
- Planting of steel bars and bolts in concrete construction
- Curtain wall stone dry hanging bracket fixing
- Fixing of road noise insulation panels and guardrails
- Various industrial machinery and equipment foundation fixing
Operation time:
| Substrate temperature | 5℃ | 15℃ | 25℃ | 35℃ | 45℃ |
| Operation time (gelling)/minute | 45 | 18 | 10 | 5 | 2 |
| Load-bearing time (curing)/minute | 120 | 75 | 45 | 30 | 15 |
※ There is a difference between the temperature inside the concrete and the surface temperature. Please measure it yourself.
Construction Note:
- Please first inject 5cm of the rebar glue and make sure the two doses are evenly mixed before use.
- The length of the mixing tube cannot be cut arbitrarily, and the spiral strips inside the tube cannot be discarded to avoid uneven mixing.
How to save:
- Storage temperature: 5~25℃
- Avoid direct sunlight to prevent the medicine from deteriorating
Construction instructions:
Concrete construction steps description:
- Drilling: Use an impact drill to drill holes according to the specified hole diameter and hole depth. Please refer to the technical data
- Hole cleaning: Use a steel brush to remove debris from the hole, and use a blower or other tools to blow the hole clean.
- Placement: After the mixing tube is filled with the rebar glue, it is placed in the professional silicone gun
- Mixing: Discard the 5 cm of adhesive that was not fully mixed at the beginning.
- Glue injection: Inject the anchor glue into the hole
- Implantation: Inserting steel bars or screws must be completed within the specified operation time
- Curing: During the curing process of the anchor glue, do not touch the steel bars or screws.
- Loading: After fully solidified, load and tighten
Capacity: 300ml
Origin: United Kingdom
PS-200 super anti-slip and wear-resistant gloves made in Korea are reinforced anti-slip work gloves with good breathability and excellent anti-slip and anti-slip effects. Resistant to oil stains, wear and tear, and has strong grip. PS-200 super anti-slip and wear-resistant gloves can be used in any workplace where anti-slip and hand protection are required, especially for pipeline work, warehousing personnel, construction personnel, freight personnel, refrigeration and air-conditioning construction, and use in oil-resistant environments. Hand tools can be used for maintenance work, etc., and can be used for outdoor cycling, gardening, handicrafts, fishing, military survival, mountain climbing and river tracing, etc.
product material:
- Spandex (elastic man-made fiber)
- Polyester(polyester fiber)
- Nylon(nylon)
- NBR (nitrile rubber)
- Used as PU foaming agent and epoxy resin (Epoxy) cleaning solvent
- The boiling point is higher than that of acetone, and the dosage is less, so the cost of using this product is low
- It can prevent residual materials from condensing and solidifying in the mixing process or after not being used, thus ensuring the cleanliness of the perfusion system and smooth pipelines to improve the efficiency and product quality of each perfusion.
- It has the characteristics of high boiling point, non-toxicity, and good compatibility with epoxy resin, curing agent and related oligomers.
- Made in Taiwan
Product capacity:
14kg
Instructions:
- Pour the cleaning agent into the items to be cleaned and wait until the liquid Epoxy or PU foaming agent softens. Or liquid Epoxy or PU foaming agent can be wiped off the area.
- If you are cleaning a high-pressure filling machine, please first pour the cleaning agent into the barrel, turn on the power of the machine, and directly knock out the Epoxy or PU foaming agent.
Precautions:
- Please maintain a ventilated environment
- If it accidentally gets into your eyes, please rinse with plenty of water.
- This product is suitable for cleaning agents whose PU foaming agent or Epoxy is still in liquid state. If it has hardened, it cannot be cleaned with this product.
SDS made in Taiwan Plus four-groove, four-edge cement drill bit and high-strength four-edge alloy bit improve drilling capabilities and efficiency. The four-groove cross-blade cement drill tail can achieve excellent drilling performance when drilling holes in bricks, cement concrete, and gypsum boards. It works well when paired with a force-free 4-groove hammer drill, and the construction is fast and labor-saving.
feature of product:
- Made of German super-hard tungsten steel and made of high-heat copper rods, it is tough and durable
- The four-groove power-free hammer drill uses a cement drill bit to drill the tail, which is impact-resistant and has low wear rate.
- Special thread design, fast mud discharge and fast drilling speed
- Cross-blade tungsten steel drill bit, precise hole diameter, no deviation in drilling, and improved hole entry speed
- Suitable for use with the power-free 4-groove hammer drill, saving time and effort during construction
- Four-edge design of alloy cutter head improves drilling ability and efficiency
- 400mm length, suitable for use with 6-minute labor-saving hammer drill, reducing resistance and increasing service life
Product Features:
| Product number | diameter | total length |
| AAC06511 | 6.5 | 110 |
| AAC06516 | 6.5 | 160 |
| AAC08016 | 8 | 160 |
| AAC09516 | 9.5 | 160 |
| AAC09540 | 9.5 | 400 |
| AAC10016 | 10 | 160 |
| AAC11016 | 11 | 160 |
| AAC12716 | 12.7 | 160 |
| AAC12740 | 12.7 | 400 |
| AAC13040 | 13 | 400 |
| AAC14316 | 14.3 | 160 |
| AAC16020 | 16 | 200 |
| AAC16040 | 16 | 400 |
| AAC19040 | 19 | 400 |
| AAC19520 | 19.5 | 200 |
| AAC22025 | twenty two | 250 |
| AAC22040 | twenty two | 400 |
| AAC25025 | 25 | 250 |
| AAC25040 | 25 | 400 |
| AAC28025 | 28 | 250 |
| AAC28040 | 28 | 400 |
| AAC32040 | 32 | 400 |
| AAC35040 | 35 | 460 |
Origin:
- Taiwan
Showing 330/723
