Sensitivity adjustment function with LED lighting

• During the power test, the red light is on and accompanied by a buzzer.
• Lightweight, pen-like design
• Maximum sensitivity adjustment function band (40~80V), conduct electrical testing with the most appropriate sensitivity
• With LED lighting
• Operating voltage range: AC 40 V ~ 600 V
• Power display shows battery consumption. If the green light on the front indicates that the battery voltage is OK
• Increased safety level, CAT IV 600V
• Thread the lanyard through the lanyard hole to prevent it from falling
• Original company goods, original factory warranty of 3 years

Japan HIOKI CM3289 ultra-thin clamp meter is a high-precision AC clamp meter designed for measuring AC current. Its ultra-thin design makes it easier to operate and is especially suitable for use in narrow spaces. The CM3289 not only provides accurate current measurement, but also has stable performance and durability, making it suitable for professional electricians and technicians to perform various electrical measurement tasks. The original company's products guarantee quality, giving users greater peace of mind. This hook meter also has a simple and easy-to-read display interface, which can be efficiently completed for both daily maintenance and fault diagnosis, making it an indispensable member of the electrician's tool box.

Product Features:

• Japan HIOKI CM3289 ultra-thin hook meter (current hook meter/hook meter/hook meter/electricity meter) has a new appearance upgrade! The sensing part is more slender, allowing you to clamp it more easily for measurement
• Operating temperature range -25℃～65℃
• Real effective measurements including harmonics
• With CT6280, it can measure 4199A high current of thick cables, dual cables, etc.
• AC Current:
  42.00 to 1000 A, 3 ranges (40 Hz to 1 kHz, effective value), basic accuracy: ±1.5 % rdg. ±5 dgt.
• DC Voltage:
  420.0 m～600 V, 5 ranges, basic accuracy: ±1.0% rdg. ±3 dgt.
• AC Voltage:
  4.200～600 V, 4 ranges (45～500 Hz, effective value), basic accuracy: ±1.8 % rdg. ±7 dgt.
• Measurable conductor diameter: φ 33 mm or less

Specifications:

• Automatically determine AC/DC
• The open circuit voltage maintenance of solar panels can be measured up to DC2000V (must be equipped with the optional DC high-voltage probe P2000; the host can only measure up to DC1000V)
• Simultaneously displays the true RMS value and waveform peak value of the starting current (INRUSH)
• Dustproof and waterproof performance: IP54
• Supports wirelessization ~ transmit measured values ​​to smartphones or tablets (when wireless adapter Z3210 is installed)
• Wirelessly transmit measurement data directly to Excel® sheets (when wireless adapter Z3210 is installed)
• Harmonic analysis from the 1st to the 30th order can be performed through GENNECT Cross (when wireless adapter Z3210 is installed)

• 5 ranges, test voltage 50V/100MΩ~1000V/4000MΩ
• Stable and medium-speed digital display, the response time of PASS/FAIL judgment is only 0.8 seconds
• 1M anti-fall on concrete
• High-brightness LED display screen, test line with LED light switch (option L9788-11 or L9788-10)
• 200mA test continuous check
• Can measure AC/DC voltage, suitable for testing solar power generation systems and electric vehicles

Product specifications:

HIOKI insulation high resistance meter/high resistance meter adopts an integrated design.

IR4057-50 is an insulation high-resistance meter with 5 ranges and a test voltage of 50V/100MΩ~1000V/4000MΩ. It has powerful functions and fast response speed, which helps shorten on-site working time.

• Supports wireless communication: transmits measurement results to smartphones or tablet devices, and allows you to combine test results with on-site photos or drawings to quickly create reports (when used with wireless adapter Z3210), thus helping to shorten the time on site Insulation measurement working time
• Measurement data will be directly input into the Excel form through wireless transmission (this function is expected to be included in the 2021 version upgrade)
• 5 test ranges from 50 V / 100MΩ to 1000 V / 4000MΩ
• digital scale bar
• Stable and high-speed digital display, PASS/FAIL judgment response time is only 0.3 seconds
• Can withstand the impact of a 1m drop on concrete
• High-brightness LED display screen, test line with LED light switch (option L9788-11 or L9788-10)
• 200mA test continuous check, can measure AC/DC voltage
• Suitable for testing solar power systems and electric vehicles

Supported measuring instruments (including products expected to be supported):

Measuring instruments that support this function will be added in sequence:

• AC leakage current clamp meter CM4001
• AC leakage current clamp meter CM4002
• Insulation high resistance meter IR4057-50
• Ground resistance meter FT6031-50
• AC leakage current clamp meter CM4003
• Non-contact voltage/phase sequence table PD3259-50
• Battery tester BT3554-50
• Insulation high resistance meter IR4057-50
• AC/DC hookup table CM4371-50
• AC/DC hookup table CM4373-50

Simple! Just connect the Z3210 to a HIOKI measuring instrument that supports this function!

HIOKI measuring instruments that support this function can be made wireless by simply making a connection. Transfer measurements to your tablet or smartphone.

Origin:
Japan

• Japanese steel SK5 blade, sharp and durable
• The blade is sharp and durable, suitable for paper cutting, art paper carving, decoration cutting, plywood cutting, etc.
• Blade thickness 0.7mm, suitable for replacement of various extra large utility knives
• Professional Extra Large Utility Knife Replacement Blade

Product specifications:

• Japanese SK5 steel blade, sharp and durable
• 0.4x9x75mm 9-section art blade, the blade is sharp and durable, suitable for paper cutting, art paper carving and other operations
• Small utility knife replacement blade
• Made in Taiwan

• Product specifications:

  Product number	Specification
  FM916021-1	Thickness 0.4 x Width 9 x Length 75 (mm) / SK5 Japanese steel

  Origin:

  • Taiwan

• Made in Japan, Japan's Okada Metal Industries Z saw is a genuine Japanese calcium silicate board gypsum board special hand saw blade imported from Taiwan.
• Excellent quality and sharpness made in Japan, 120mm short blade design, sturdy blade, suitable for cutting side boards, gypsum boards and calcium silicate boards
• Interchangeable blade design, easy to replace

Product specifications:

• Blade length: 120mm
• Tooth spacing: 1.50mm
• Saw blade thickness: 0.60mm

Origin:

• Japan

• Japan's Z brand water pipe saw can cut hard plastics, such as PVC materials, polystyrene, acrylic, PET resin, etc., with no burrs on the cutting surface
• Z brand water pipe saw is the best choice for hand saw for piping. It has excellent effect on plastic materials (PVC, etc.)
• In addition to being used for cutting plastic pipes, PVC pipe saws have a narrow tip shape and are suitable for use in small spaces or can easily shuttle back and forth between narrow branches. Therefore, they are also often used for cutting thin branches.
• Made in Japan with excellent quality and sharpness, it can be used for PVC plastic water pipes, cut bamboo, twigs, and general wood, etc.
• The blade of Japan's Z brand PVC pipe saw has a special coating with anti-rust effect, which can reduce frictional resistance and make operation smoother.
• Genuine product from Japan, the handle of the water pipe saw is engraved with the Z brand logo, and the saw blade is engraved with the Taiwan general agent. renzhi trading co., ltd.
• PVC pipe saw has replaceable blade design, easy to replace

Product specifications:

• Blade length: 225mm
• Tooth spacing: 1.50mm
• Saw blade thickness: 0.60mm
• Cutting width: 0.90mm

Origin:

• Japan

• Japan's Z brand pipe saw is unanimously praised by professional plumbers and is excellent at cutting plastic pipes.
• Z brand PVC water pipe saw can cut hard plastics, such as PVC materials, polystyrene, acrylic, PET resin, copper pipes, etc., with no burrs on the cutting surface
• Z brand water pipe saw is the best choice for hand saw for piping. It has excellent effect on plastic materials (PVC, etc.)
• Made in Japan with excellent quality and sharpness, the Z brand water pipe saw is suitable for cutting PVC plastic water pipes, thin branches and general wood.
• The PVC pipe saw blade has a special coating with anti-rust effect, which can reduce friction resistance and make the operation smoother.
• Authentic Japanese product, the handle of the water pipe saw is engraved with the Z brand logo, and the saw blade is engraved with the Taiwan General Agent. renzhi trading co., ltd.
• Japanese Z brand PVC pipe saw with replaceable blade design, easy to replace

Product specifications:

• Blade length: 225mm
• Tooth spacing: 1.50mm
• Saw blade thickness: 0.60mm
• Cutting width: 0.90mm

Origin:

• Japan

• Japanese Z brand 240mm water pipe saw blade hand saw blade, suitable for Japanese Z brand water pipe saws. Professional plumbers unanimously recommend it, and it is very good at cutting plastic pipes.
• Z brand PVC water pipe saw can cut hard plastics, such as PVC materials, polystyrene, acrylic, PET resin, copper pipes, etc., with no burrs on the cutting surface
• Z brand water pipe saw is the best choice for hand saw for piping. It has excellent effect on plastic materials (PVC, etc.)
• Made in Japan with excellent quality and sharpness, the Z brand water pipe saw is suitable for cutting PVC plastic water pipes, thin branches and general wood.
• The PVC water pipe saw has a special coating with anti-rust effect, which can reduce friction resistance and make the operation smoother.
• Authentic Japanese product, the PVC pipe saw blade is engraved with Taiwan General Agent. renzhi trading co., ltd.
• The hand saw blade has an interchangeable blade design and is easy to replace.

feature of product:

• Japanese Z brand 240mm water pipe saw blade hand saw blade, suitable for Japanese Z brand water pipe saw, super powerful in cutting plastic pipes
• Z brand water pipe saw is the best choice for hand saw for piping. It has excellent effect on plastic materials (PVC, etc.)
• In addition to being used for cutting plastic pipes, PVC pipe saws have a narrow tip shape and are suitable for use in small spaces or can easily shuttle back and forth between narrow branches. Therefore, they are also often used for cutting thin branches.
• Made in Japan with excellent quality and sharpness, it can be used for PVC plastic water pipes, cut bamboo, twigs, and general wood, etc.
• The blade of Japan's Z brand PVC pipe saw has a special coating with anti-rust effect, which can reduce frictional resistance and make operation smoother.
• Authentic Japanese product, the PVC pipe saw blade is engraved with Taiwan General Agent. renzhi trading co., ltd.
• The hand saw blade has an interchangeable blade design and is easy to replace.

  Product specifications:

  • Blade length: 225mm
  • Tooth spacing: 1.50mm
  • Saw blade thickness: 0.60mm
  • Cutting width: 0.90mm

  Origin:

  • Japan

• Made in Japan, Japan's Okada Metal Industry Z saw is a Japanese genuine light metal pipe special hand saw imported from Taiwan by the general agent.
• Japan Z brand light metal pipe special hand saw, can cut aluminum, copper, lead, brass
• Excellent quality and sharpness made in Japan, 225mm saw blade design, sturdy blade, suitable for light metals such as aluminum, copper, lead, brass, etc.
• Japanese Z brand hand saw for metal pipes, special surface treatment, rust-proof and more durable
• Interchangeable blade design, easy to replace

  Product specifications:

  • Blade length: 225mm
  • Tooth spacing: 1.41mm
  • Saw blade thickness: 0.60mm
  • Cutting width: 0.95mm

  Origin:

  • Japan

• Made in Japan, Japan's Okada Metal Industry Z saw is a Japanese genuine iron pipe and metal pipe special hand saw imported from Taiwan's general agent.
• Japan's Z brand metal pipe special hand saw, in addition to aluminum, copper, lead, brass, can cut "iron" materials
• Excellent quality and sharpness made in Japan, 225mm saw blade design, strong blade, suitable for iron pipes (gas pipes, resin films), rain gutters, aluminum frames and other metals
• Japanese Z brand hand saw for metal pipes, special surface treatment, black phosphate coating, rust-proof and more durable
• The cutting edge is made of high-speed steel, which is more durable
• Suitable for small spaces, especially power tools and spaces that are not easily accessible
• Interchangeable blade design, easy to replace

  Product specifications:

  • Blade length: 225mm
  • Tooth spacing: 1.41mm
  • Saw blade thickness: 0.70mm
  • Cutting width: 1.00mm

  Origin:

  • Japan

• Made in Japan, Japan's Okada Metal Industry Z saw is a Japanese genuine iron pipe and metal pipe special hand saw imported from Taiwan's general agent.
• Japan's Z brand metal pipe special hand saw, in addition to aluminum, copper, lead, brass, can cut "iron" materials
• Excellent quality and sharpness made in Japan, 225mm saw blade design, strong blade, suitable for iron pipes (gas pipes, resin films), rain gutters, aluminum frames and other metals
• Japanese Z brand hand saw for metal pipes, special surface treatment, black phosphate coating, rust-proof and more durable
• The cutting edge is made of high-speed steel, which is more durable
• Suitable for small spaces, especially power tools and spaces that are not easily accessible
• Interchangeable blade design, easy to replace

  Product specifications:

  • Blade length: 225mm
  • Tooth spacing: 1.41mm
  • Saw blade thickness: 0.70mm
  • Cutting width: 1.00mm

  Origin:

  • Japan

• Japanese Z brand 300mm PVC water pipe saw blade, suitable for Japanese Z brand water pipe saws, excellent for cutting plastic pipes
• Suitable for cutting PVC plastic pipes with a diameter of 200mm or above
• PVC pipe saw can cut hard plastics, such as PVC materials, polystyrene, acrylic, PET resin, copper pipes, etc., with no burrs on the cutting surface
• Japan's Z brand water pipe saw is the best choice for hand cutting of pipes, and has excellent effects on plastic materials (PVC, etc.)
• Excellent quality and sharpness made in Japan, suitable for both PVC plastic water pipes and copper water pipes
• The PVC pipe saw blade has a special coating with anti-rust effect, which can reduce friction resistance and make the operation smoother.
• Authentic Japanese product, the PVC pipe saw blade is engraved with Taiwan General Agent. renzhi trading co., ltd.
• The hand saw blade has an interchangeable blade design and is easy to replace.

Product specifications:

• Blade length: 300mm
• Tooth spacing: 1.50mm
• Saw blade thickness: 0.60mm
• Cutting width: 1.00mm

Origin:

• Japan

• Made in Japan, Japan's Okada Metal Industry Z saw is a Japanese genuine light metal pipe special hand saw imported from Taiwan by the general agent.
• Japan Z brand light metal pipe special hand saw, can cut aluminum, copper, lead, brass
• Excellent quality and sharpness made in Japan, 225mm saw blade design, sturdy blade, suitable for light metals such as aluminum, copper, lead, brass, etc.
• Japanese Z brand hand saw for metal pipes, special surface treatment, rust-proof and more durable
• Interchangeable blade design, easy to replace

  Product specifications:

  • Blade length: 225mm
  • Tooth spacing: 1.41mm
  • Saw blade thickness: 0.60mm
  • Cutting width: 0.95mm

  Origin:

  • Japan

• Japanese original SK2 blade, sharp and durable
• The blade is sharp and durable, suitable for paper cutting, art paper carving, decoration cutting, plywood cutting, etc.
• Blade thickness 0.5mm, suitable for replacement of various large utility knives
• Professional Large Utility Knife Replacement Blade

Material :
Japanese original SK2 steel

Assembly place:
Taiwan

• Japanese original SK2 blade, sharp and durable
• The blade is sharp and durable, suitable for paper cutting, art paper carving, decoration cutting, plywood cutting, etc.
• Blade thickness 0.5mm, suitable for replacement of various large utility knives
• Professional Large Utility Knife Replacement Blade

Material :
Japanese original SK2 steel

Assembly place:
Taiwan

• Imported from Japan original factory
• The copper pipe rounder is a copper pipe corrector that corrects deformed copper pipes such as bending and flattening.
• Clamp the deformed copper pipe several times and apply pressure to return it to a nearly round shape

• How to use:
  Place the deformed copper pipe in the clamping groove of the corresponding size, repeatedly hold the handle and rotate the copper pipe in a small amount, adjust the grip strength and repeat the repair until it forms a circle.

  Product specifications:
  - Applicable copper pipe: 1/4", 3/8", 1/2", 5/8"
  - Overall length: 27.5 cm
  - Weight: 340g 

  Origin:
  Japan

  Notice:
  The greatly deformed copper pipe cannot be restored to a perfect circle

Japanese craftsmanship is unique and unparalleled~

Japanese Okada Metal Industry Z saw Taiwan general agent original imported Japanese genuine product

Japanese Okada Saw Z brand Japanese-style woodworking double-edged saw, 250mm long blade, can make beautiful and smooth cuts in both horizontal and vertical cuts. The blade is heat-treated and quenched, providing 5 times the durability of the blade. It is the best choice for your manual woodworking saw. best choice.

feature of product:

• Double-edged design, one side is a transverse cutting edge, and the other side is a longitudinal cutting edge. It can make beautiful and smooth cuts in both horizontal and vertical cutting.
• The blade is heat treated and quenched to provide 5 times the durability of the blade.
• Fine serrations, exquisite workmanship, sharp and durable
• Special surface treatment, the blade is not easy to rust
• Replaceable blade design, using threaded blade disassembly and assembly mechanism, easy to replace
• Universal design, the handle can be used in combination with other saw blades
• Rattan wooden handle handle, anti-slip and more comfortable
• Can be used on wood, plywood, hardwood, integrated materials, composite materials, plywood
• Japanese Okada saw Z brand original company goods

Japanese Z brand original genuine Okada saw-180mm waist saw for woodworking comes with a special rotatable saw sheath, which can be tied to the waist and can be used at any time. It can be taken out and stored with one hand, and it does not get in the way when working at heights or squatting down, making it easy to carry.

feature of product:

• Suitable for cutting general wood, joint strips, ceiling bases, plywood, etc.
• Best choice for woodworking hand saw, great for cutting but not suitable for cutting tree branches and bamboo
• Made in Japan with excellent quality and sharpness, the specially ground front edge can scratch and penetrate various boards for punching and cutting.
• Comes with a special rotatable saw sheath, excellent portability, can be quickly taken out and stored with one hand, improving work efficiency
• Interchangeable blade design, easy to replace
• The 360° rotating clip-on belt loop can be hung around the waist for easy use in the workplace.
• Anti-slip grip, thickened at the end for easier gripping, and will not slip even when working with gloves. Grip
• The 10mm hole at the end can be hung, or an anti-fall rope or hook can be installed to facilitate high-altitude operations.
• Japanese Okada saw Z brand original company goods

Product specifications:

• Blade length: 180mm
• Tooth spacing: 1.75mm
• Saw blade thickness: 0.60mm
• Cutting width: 0.92mm

Origin:

• Japan
• 
  

product description

• No special equipment is required and can be used indoors or outdoors.
• Simple operation and easy to use.
• Micro-defects that are difficult to detect with the naked eye can also be highlighted by the bright red color, so it is easy to find scars and avoid mistakes in color inspections.
• There is no restriction on the material, shape and completion status of the object. (Except coated surfaces and plastics)
• In spray form, it is easy to use and easy to carry.
• Safe for use on the most corrosive aluminum and magnesium alloys.
• As long as it is not erased, the inspection results can be saved.
• Inspection can be carried out at room temperature to 80°C.
• Inspection is carried out at -10℃ to 50℃, and the detection sensitivity is 1μm width and 10μm depth.

Product Usage:

It can be used for all metal materials such as iron, non-ferrous, magnetic and non-magnetic, as well as non-metallic materials such as porcelain and glass.

• Cast parts: pinholes, shrinkage cracks
• Forging part: Forging cracks
• Welding parts: cracks, holes, poor joints, penetration defects
• Fatigue phenomena of metal materials: grinding cracks, burning cracks, cutting cracks
• Defect inspection: drums, boilers, pipes, etc.
• Strip Inspection: Strip Inspection of Hot Spot Packaging Materials

Instructions:

The dye penetration flaw detection method is to soak the defective part of the surface of the item to be inspected with a red penetrating liquid, then use a cleaning solution to remove the red penetrating liquid, and then use a white developer to create a capillary image, so that the defective part is soaked in red. The fluid develops color, allowing defects that are invisible to the naked eye to be discovered.

The inspection method specifically refers to the following four basic steps:

Product specifications:

Cleaning fluid:
- Appearance: colorless transparent liquid
- Operating temperature range: 0~60℃
- Content volume: 420ml
- Quantity: 2 cans

Soaking fluid:
- Appearance: red liquid
- Operating temperature range: 0~80℃
- Content volume: 420ml
- Quantity: 1 can

Developer:
- Appearance: White powder coating
- Operating temperature range: 0~50℃
- Content volume: 420ml
- Quantity: 1 can

• No special equipment is required and can be used indoors or outdoors.
• Simple operation and easy to use.
• Micro-defects that are difficult to detect with the naked eye can also be highlighted by the bright red color, so it is easy to find scars and avoid mistakes in color inspections.
• There is no restriction on the material, shape and completion status of the object. (Except coated surfaces and plastics)
• In spray form, it is easy to use and easy to carry.
• Safe for use on the most corrosive aluminum and magnesium alloys.
• As long as it is not erased, the inspection results can be saved.
• Inspection can be carried out at room temperature to 80°C.
• Inspection is carried out at -10℃ to 50℃, and the detection sensitivity is 1μm width and 10μm depth.

Product Usage:

It can be used for all metal materials such as iron, non-ferrous, magnetic and non-magnetic, as well as non-metallic materials such as porcelain and glass.

• Cast parts: pinholes, shrinkage cracks
• Forging part: Forging cracks
• Welding parts: cracks, holes, poor joints, penetration defects
• Fatigue phenomena of metal materials: grinding cracks, burning cracks, cutting cracks
• Defect inspection: drums, boilers, pipes, etc.
• Strip Inspection: Strip Inspection of Hot Spot Packaging Materials

Instructions:

The dye penetration flaw detection method is to soak the defective part of the surface of the item to be inspected with a red penetrating liquid, then use a cleaning solution to remove the red penetrating liquid, and then use a white developer to create a capillary image, so that the defective part is soaked in red. The fluid develops color, allowing defects that are invisible to the naked eye to be discovered.

The inspection method specifically refers to the following four basic steps:

Product specifications:

• Appearance: red liquid
• Operating temperature range: 0~80℃
• Content volume: 420ml

• Japanese steel black SK2 blade, sharp and durable
• The blade is sharp and durable, suitable for paper cutting, art paper carving, decoration cutting, plywood cutting, etc.
• Blade thickness 0.5mm, suitable for replacement of various large utility knives
• Professional Large Utility Knife Replacement Blade Black Blade

Material :
Japanese steel SK2 black blade

Origin:
Taiwan

Paired with Japanese electric hammer hexagonal chisel, electric hammer chisel

High speed steel, super hard and durable

Pointed chisel: used for knocking tiles, chiseling and repairing pipelines, removing surface paint dust, tiles, and gypsum coverings, chiseling and repairing structural connections, light chiseling, suitable for delicate construction by various engineers

Flat chisel: suitable for chiseling, cleaning and crushing concrete and brick demolition

Large flat chisel: surface cleaning, paint, resin, adhesive layer removal, hole punching, excavation