• Made in Taiwan, 45-degree torx wrench set (45-degree torx wrench set/double torx wrench set)
• Special CR-V chromium vanadium alloy steel material, tough and durable
• The design of the plum blossom end fillet replaces the traditional right angle and can increase the contact area with the rotated nut.
• The fillet design is changed from point contact to surface contact, and the torque is increased.
• Protect the rotated nut from damage during the force process and extend the life of the tool
• It is easier to remove the lock nut, which is convenient, time-saving and convenient

Set of 6:

8 piece set:

10 piece set:

• Compound wrenches made in Taiwan (composite wrenches and box spanners)
• The plum blossom end fillet design increases the contact area with the rotated nut and can increase the torque by 20%.
• The special-shaped opening design can protect the rotated nut, making it easier to disengage and smooth the locking nut, saving time and effort.
• CR-V chromium vanadium steel material design, stronger and more durable

  Product number	size	L	A	B	C	D
  FM860006	6	102	15.7	10.4	3.6	4.5
  FM860007	7	112	17.2	11.6	4.0	4.9
  FM860008	8	122	19.6	12.8	4.5	5.3
  FM860009	9	132	21.5	14.6	4.7	5.7
  FM860010	10	140	23.8	16.2	4.9	6.6
  FM860011	11	150	25.6	17.5	5.0	6.9
  FM860012	12	160	27.4	18.4	5.4	7.2
  FM860013	13	170	29.6	19.8	5.9	7.7
  FM860014	14	180	31.7	21.6	6.2	8.6
  FM860015	15	190	33.2	23.1	6.5	8.7
  FM860016	16	200	34.7	24.5	6.6	8.9
  FM860017	17	210	36.8	25.8	6.7	8.9
  FM860018	18	220	38.8	26.9	7.1	9.9
  FM860019	19	230	40.8	28.6	7.4	10.3
  FM860020	20	240	43.0	29.7	7.6	10.5
  FM860021	twenty one	250	45.3	31.8	7.8	11.0
  FM860022	twenty two	260	46.6	32.7	8.0	11.7
  FM860023	twenty three	270	47.7	33.5	8.4	11.9
  FM860024	twenty four	280	50.4	35.9	8.5	12.2
  FM860025	25	290	52.5	36.9	8.8	12.3
  FM860026	26	300	53.0	38.2	9.0	12.4
  FM860027	27	310	53.3	38.5	9.2	12.5
  FM860028	28	320	56.6	40.5	9.3	12.6
  FM860029	29	330	59.0	41.4	9.5	12.8
  FM860030	30	340	62.3	43.9	9.9	13.2
  FM860032	32	360	65.7	45.7	10.3	14.0
  FM860033	33	380	69.2	50.2	11.6	15.7
  FM860034	34	380	69.2	50.2	11.6	15.7
  FM860035	35	410	74.6	54.3	13.2	18.5
  FM860036	36	410	74.6	54.3	13.2	18.5
  FM860038	38	440	77.0	57.0	14.4	19.0
  FM860041	41	460	83.6	61.3	14.5	21.5
  FM860042	42	460	83.6	61.3	14.5	21.5
  FM860043	43	460	83.6	61.3	14.5	21.5
  FM860044	44	500	89.3	63.9	15.0	21.7
  FM860045	45	500	89.3	63.9	15.0	21.7
  FM860046	46	500	89.3	63.9	15.0	21.7
  FM860048	48	540	97.0	73.5	16.9	23.1
  FM860050	50	540	97.0	73.5	16.9	23.1

  Unit: mm

• Taiwan-made compound wrench (compound wrench, open end wrench)
• The rounded corner design at the end of the plum blossom increases the contact area with the rotating nut and can increase the torque by 20%.
• The special-shaped opening design can protect the rotating nut, making it easier to remove the locking nut, saving time and effort
• CR-V chrome vanadium steel material design, more tough and durable

7-piece set:

8-piece set:

11-piece set:

12-piece set:

14-piece set:

• Ratchet flat four-purpose wrench (gear wrench, socket wrench, flat wrench) made in Taiwan
• Suitable for any narrow space ( especially when ordinary wrenches cannot be used )
• Designed with chromium vanadium steel, the gears are sturdy and durable
• The handle steel plate is thickened and has higher torque.
• Covered edges for a comfortable grip
• The special four-corner sleeve is suitable for air-conditioning and refrigeration compressor air inlet valves and can be used in narrow places.
• Special for compressor inlet valve

  Product specifications: 

  Product number	size	Length(mm)	Weight(g)
  FM830001	3/16"x1/4" ● 5/16"x3/8"	140	110

• Ratchet type adjustable wrench, patented design can use ratchet and general wrench functions at the same time
• Simple switching knob, can quickly switch between ratchet and general wrench action
• Save 50% working time
• Easy to operate in a 45-degree narrow space
• Enlarged opening, comfortable and durable
• Torque value is 130% higher than ASME, high safety
• CR-V chromium vanadium steel material

  product material:

  • CR-V chromium vanadium steel material, matte surface treatment
  • Handle: TPR

  hardness:

  • HRC40-50

  Origin:

  • Taiwan

• Ratchet type cable cutter, ratchet progressive type, saves effort, fast, and safe to cut cables up to 500mm ²
• Ratchet-type cable cutter, CR-MO chromolybdenum steel blade has been specially ground to make it sharp and durable
• Ratcheting cable pliers, replaceable blade design, handle steel plate is heat treated and does not deform
• The ratchet cable cutter can cut wires and cables with a diameter of less than 52mm, and can cut cross-connected PE wires and cables, PEX or XLPE cables.
• Cutting ability:
• • IV CV 500 Single Center Ø35
  • 600V CV 500 single core Ø38
  • 3KV CV 150 x 3 Ø46
  • 6KV CV 100x3 Ø52

Product specifications:

• Scope of application: 500mm ²
• Overall length: 400mm
• Total weight: 1600g

Remark:

• Do not use ACSR iron wire, hard copper wire, etc.

• Ratchet progressive type, cutting cables in small spaces, labor-saving and fast
• CR-V blade
• Soft copper, aluminum and soft copper multi-core cable cutting capacity up to 325mm² (600MCM)
• Cut the hard copper stranded wire to 200mm² (400MCM)
• Suitable for cutting copper wires, aluminum wires and multi-core cables
• Forged blade, edge hardness HRC 62°

product material:

• Body: Chromium-molybdenum alloy steel
• Handle: medium carbon steel+PVC

Product specifications:

• Cable cutting outer diameter capacity: 32mm
• Scope of application: 325mm ²
• Overall length: 250mm
• Weight: 580g

Origin:
Taiwan

• Ratchet progressive type, cutting cables in small spaces, labor-saving and fast
• CR-V blade
• Maximum cutting capacity up to 325 mm²
• Suitable for cutting copper wires, aluminum wires and multi-core cables
• Forged blade, edge hardness HRC 62°

product material:

• Body: Chromium-molybdenum alloy steel
• Handle: medium carbon steel+PVC

Product specifications:

• Cable cutting outer diameter capacity: 32mm
• Scope of application: 325mm ²
• Overall length: 260mm
• Weight: 585g

Origin:
Taiwan

Extremely close range side-view industrial endoscope, designed for wafer inspection and mechanical parts inspection. This snake tube endoscope is suitable for wafer fabs and other industrial inspection environments, providing high-precision inspection solutions. The ultra-close side-view endoscope can detect in a small space and at an extremely close distance (closest 4-5mm), and provide clear images and accurate detection results. Whether you need to perform wafer inspection or mechanical inspection, the PST-2486-9155 industrial endoscope can provide high-quality solutions.

Product Features:

• 300,000 pixel 5.5mm lens with built-in 90° industrial endoscope, two focal length ranges are available: 4mm-5mm / 10mm-16mm.
• The 4mm - 5mm focal length is suitable for inspecting objects at very close distances, and the 10-16mm focal length is suitable for inspecting objects at short distances.
• 5.5mm lens 90° focal length 4mm-5mm industrial endoscope, LED light is designed with diffuse light, will not cause white exposure due to reflection of smooth objects.
• 3.5” LCD display, capable of taking photos and recording videos.
• IP67 dust-proof and splash-proof lens.
• Brightness intensity can be adjusted.
• Replaceable lithium battery design.
• Multi-language support.
• Ergonomic design, easy to hold and operate.

Scope of application:

• Inspection and maintenance of precision machinery and equipment: bearings, printers, molds, lathes, etc.
• Quality control: incoming material inspection, finished product shipment inspection
• Factory production line: process project testing, wafer process confirmation, circuit board defect repair

Specifications:

*If you need this product, please email or call for quotation

• Made in Taiwan, European style L-shaped injection hexagonal wrench
• Made of chromium-molybdenum steel with high torque and can lock objects correctly
• L-shaped long and short body, suitable for various spaces
• Ergonomically designed handle, convenient, comfortable and neat
• Single-sided short arm design, easy to operate, ideal for small spaces

※The handles of some specifications are changed to black, and some are still orange handles

Product specifications:

• European style L-shaped star hollow wrench set made in Taiwan
• Made of chromium-molybdenum steel with high torque and can lock objects correctly
• L-shaped long and short body, suitable for various spaces
• Ergonomically designed handle, convenient, comfortable and neat
• Single-sided short arm design, easy to operate, ideal for small spaces

Product specifications:

• European style L-shaped ball hexagonal wrench made in Taiwan
• Made of chromium-molybdenum steel with high torque and can lock objects correctly
• L-shaped long and short body, suitable for various spaces
• Ergonomically designed handle, convenient, comfortable and neat
• Single-sided short arm design, easy to operate, ideal for small spaces

Product specifications:

※The handles of some specifications are changed to black, and some are still orange handles

product description

product description

feature of product:

• Water-stop needles (injection needles, high-pressure grouting nozzles) made in Taiwan
• High pressure filling machine accessories
• The water-stopping needle is firmly fixed in the hole by a quick tightening device after drilling the concrete, and is connected to the high-pressure pipe by a quick connector. When the agent is injected into the hole, there is a check valve device to prevent the resin from flowing back after high-pressure pouring. .

High-pressure pouring and leak-stopping method:
Structural cracks and water leakage treatment

1. Drill at an angle of 45 degrees at 5 cm to 10 cm to the left or right of the lowest point of the crack to half the thickness of the structure. Drill from low to high in sequence. The hole spacing is preferably 15 cm to 30 cm. Drill to the highest point before drilling again. Bury the water stop needle once.
2. Since cracks in general structures are irregular, special attention must be paid to drilling holes that must cross the fracture surface for injection to be effective. (To achieve good results, the distance between holes can be shortened)
3. After the water-stop needle is installed, first check the structural strength of the structure; if the structural strength is insufficient, use a high-pressure infusion machine to inject a single-liquid hydrophobic foaming agent until the injection material is found to ooze out on the surface of the structure.
4. After the filling is completed, the water-stop needle can be removed after the material is completely solidified.

Treatment of water leakage in construction joints

1. Drill holes 5 cm to 10 cm to the left or right of the lowest point of the construction joint at an angle of 45 degrees to a depth of 1/2 of the thickness of the structure. Drill from low to high. The appropriate hole spacing is 15 cm to 30 cm. After reaching the highest point, bury the water-stop needle again. Since cracks in general structures are irregular, special attention must be paid to drilling holes that must cross the crack surface. Injections are effective.
2. After the water-stop needle is set, use a high-pressure infusion machine to inject the water-stop foaming agent until the foaming agent is found to seep out on the surface of the structure.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.
4. If the water seepage still cannot be improved, just use a water-stop foaming agent to repair it.

Honeycomb water leakage treatment

1. In the honeycomb area, drill a hole every 25cm to 30cm, with a depth of 1/2 of the thickness of the structure, and then bury the water-stop needle and tighten it.
2. After the water-stop needle is set, use a high-pressure infusion machine to inject the water-stop foaming agent until the foaming agent is found to seep out on the surface of the structure, which can completely solve the water leakage problem.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Water leakage from ring cracks

1. First, drill directly at the crack of the ring piece. The drilling depth must exceed the thickness of the ring piece. Bury the water-stop needle and then inject the water-stop foaming agent;
2. Then drill a hole 5cm to 10cm to the left or right of the ring piece at an angle of 45 degrees to a depth of 1/2 of the ring piece thickness, bury the water-stop needle, and inject the water-stop foaming agent again.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Water seepage between ring pieces

1. Drill holes at the water seepage between the ring plates first. The drilling depth must exceed the thickness of the ring plates.
2. Bury the water-stop needle and then inject the water-stop foaming agent.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Grouting hole water seepage

1. Drill a 5mm hole directly on the pouring hole cover
2. Then inject the water-stop foaming agent through this hole.
3. After the pouring is complete, the water-stop needle can be removed after the material is completely solidified.

Product specifications:

*If you have any needs, please contact our company directly.

• Cross cement screws, Weihua head asymmetric thread high tension screws
• Generally used in water and electricity decoration, it can be directly locked on the cement wall after being used with a cement drill bit to guide the hole.

Product specifications:

Material:

Origin:
Taiwan

• Cement steel nails, straight steel nails
• Generally used in water and electricity decoration, formwork, construction, commonly used in hard wood, cement walls, bricks
  

Product specifications:

Material:

Origin:
Taiwan

• Mini folding saw for water pipes made in Taiwan (PVC plastic pipe saw, water pipe folding saw, PVC folding saw, water pipe saw, mini folding saw, pocket folding saw, mini folding saw)
• 2-stage angle adjustment, convenient for folding and storage
• Sawing PVC pipes with a mini folding saw for water pipes without burrs
• High frequency heat treated SK4 saw blade, sharp and durable; replaceable saw blade design
• Electroplating anti-rust treatment on blade surface
• Safety fixing buckle design, fixing the blade without slipping
• Ergonomic anti-slip handle design
• The water pipe is only 17 cm long after being folded with a mini folding saw. It can be placed in your pocket and is easy to carry.

Product specifications:

水龍頭轉接頭採用外牙螺紋式設計，專為水龍頭擴充設計，安裝簡便快速。穩固連接各類水管，強化用水便利性。防漏設計確保密封性，適用於家庭用水、花園澆灌等多種場景。

材質：ABS+鐵
適用尺寸：6分牙
使用溫度：0-40℃
最高使用壓力：60PSI以下
產地：台灣

水龍頭轉接頭-奶嘴式快速接頭型是一款安裝方便的轉接配件，可讓水龍頭輕鬆連接水管或相關設備，適用於庭院澆花、洗車及居家清潔。其快速接頭設計，無需工具即可安裝，穩固不漏水，提升用水效率。不論是陽台、花園或廚房，都能輕鬆應用，讓日常用水更便捷。

材質：ABS+鐵
適用尺寸：4分
使用溫度：0-40℃
最高使用壓力：60PSI以下
產地：台灣

Permanent screw fixative is a single liquid, medium to high strength, thixotropic anaerobic adhesive. It is suitable for the surfaces of two closely connected metal parts. The bonding will be solidified when used under oxygen-deficient conditions. Even if it is subject to vibration or impact, it can prevent leakage and loosening of the connected parts.

Screw fixing agent is mainly used to fix metal screws and fasteners to prevent screws, bolts and nuts from loosening due to vibration and enhance safety. In addition, after being fixed, it can also avoid contamination or corrosion from other chemicals and achieve anti-rust effect.

feature of product:

• Screw fixing agents made in Taiwan (screw fixing glue, screw glue, anti-loosening glue, thread locking agent, thread screw glue, fastening glue, anaerobic glue, permanent fixing screw glue)
• Suitable for permanent fixing of screws and fasteners smaller than M20
• It can prevent nuts, bolts and screws from loosening due to thermal expansion, contraction or vibration. The screws will not loosen after being fixed, making tools and instruments highly safe.
• It can resist the corrosion of lubricating oil, engine oil, gasoline, weak acid, weak alkali and most chemicals to achieve anti-rust effect.
• Replaces traditional screw washers or washers, easy to assemble
• Non-toxic, solvent-free, no shrinkage after hardening

Notice:
Permanent screw fixatives are not suitable for pure oxygen or oxygen-rich environments, and cannot be used on materials that contain chlorine or are highly susceptible to oxidation.

If you use liquid to clean the surface of the object before joining, please pay special attention to the compatibility of the glue and the cleaning water. In some cases, these solutions will affect the curing and performance of the glue. Under normal circumstances, this product is not recommended for use on plastic products (especially thermoplastic plastics, which may crack due to pressure). Users are advised to confirm the compatibility of the object first.

Product specifications:

• Main ingredients: acrylate
• Viscosity: 1600-5500CPS
• Hardening speed: 15 minutes
• Breakaway torque: 22 Nm (Newton meters)
• Friction torque: 10 Nm (Newton meters)
• Temperature range: -54 ~ 150℃
• Capacity: 10ml

Instructions:

Assemble
1. For best results, the surface of the object must be clean and free of oil.
2. Shake thoroughly before use.
3. If the substrate is an inactive metal, consider using a catalyst
4. An appropriate amount of permanent screw fixing agent should be applied to the thread engagement, but only the first turn of threads should be left without sealant. If the thread is larger, you need to increase the amount of coating and drip an appropriate amount of glue on the nut.
5. Assemble and tighten the screws and nuts
6. Use appropriate tools to tighten until a proper fit is achieved. Allows to sit for 24 hours for maximum strength

clean
1. Remove the hardened product by brushing with solvent

Origin:
Taiwan

• Automobile T-type socket wrench made in Taiwan
• Chrome-molybdenum special alloy steel material, made of heat treatment technology, high torque
• Super hard, high toughness, wear resistance
• Attached rubber sleeve handle for better grip
• The best choice of auto repair tools

Product specifications:

• Submersible pump (submersible pump, submersible motor, pumping motor, general drainage pump)
• Full plastic steel exterior, no rust or water produced
• Lightweight design and high maneuverability
• Ultra-low water inlet, only 3mm of residual water remains
• Anti-UV plastic steel material, can be used in outdoor exposure environment for a long time
• Plug in the PIN power cord, effectively isolate water vapor and easy to replace
• Can be used with drilling machines or independently used for water pumping operations such as gardening, fish tank water changes, and water accumulation.
• Powerful motor for high-load line equipment, automatic power-off device for low water level and overheating
• Ball bearing design, durable during high-speed operation
• Mechanical shaft seal, shockproof, and protective cover protect the wire device and prevent it from being immersed in water when placed under water.
• Made in Taiwan

Application scope:

• Multifunctional application in horticulture (non-24-hour continuous operation)
• Gardening and farming irrigation
• Wastewater discharge from small cesspools (tanks)
• Temporary wastewater or stagnant water discharge after rain
• A good helper for water tower cleaning
• Fish tank water change and cleaning
• Cleaning of automobiles and motorcycles

The five-groove, ten-blade cement drill tail drill bit originally imported from France by DIAGER is a five-groove steel bar drill bit that can cut through steel bars. The five-groove hammer drill bit adopts a super-hard alloy cutter head, which can cut through steel bars. It is suitable for use with a hammer drill, and the effect is excellent.

Product Features:

• French DIAGER five-groove ten-edge cement drill tail drill bit, super-hard alloy cutter head, hard material, impact resistance, low wear rate, long life
• Five-groove hammer drill bit, powerful chiseling effect, strong penetration
• The five-groove ten-edge cement drill tail drill bit can easily drill through steel bars below 20mm
• New rotary pressure-reducing groove design facilitates chip removal, patented large double groove design, drilling speed is 25% faster
• 4 precise guides and ten main cutting edges make it easier to crush concrete
• The drill bit can drill holes of various materials, eliminating the trouble of replacing the drill tail.
• Suitable for use with the force-free five-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER five-groove ten-edge cement drill tail drill bit, indestructible even when encountering steel bars
• DIAGER drill tail imported from France

Specifications:

Unit: mm

Exclusive agent ~ DIAGER special cement drill bit imported from France for waterproofing and four-groove cement drill bit for water- stopping . It is SDS PLUS cement drill tail. The upgraded U-shaped groove is suitable for substrates with high moisture content in waterproofing and water-stopping projects, such as high-humidity sand. Stone, remove chips freely . The cutter head is made of shock-resistant carbide material, which is hard and impact-resistant. When used with a force-free 4-channel hammer drill, the effect is first-class.

Product Features:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact resistance, low wear rate, four-groove cement drill tail, upgraded U-shaped groove, suitable for bases with high moisture content in waterproofing and water-stopping projects Material, high humidity sand and gravel, free chip removal, fast drilling speed
• SDS-plus four-groove waterproof drill bit, suitable for use with the power-free 4-groove hammer drill
• DIAGER four-groove waterproof drill bit is suitable for planting reinforcement and chemical anchor bolts. It is a professional drill tail for water-stop construction.
• Diager, a drill bit originally imported from France, is the largest factory in Europe, a professional manufacturer of drill bits, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Product specifications:

The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.