• Automobile T-type socket wrench made in Taiwan
• Chrome-molybdenum special alloy steel material, made of heat treatment technology, high torque
• Super hard, high toughness, wear resistance
• Attached rubber sleeve handle for better grip
• The best choice of auto repair tools

Product specifications:

• Submersible pump (submersible pump, submersible motor, pumping motor, general drainage pump)
• Full plastic steel exterior, no rust or water produced
• Lightweight design and high maneuverability
• Ultra-low water inlet, only 3mm of residual water remains
• Anti-UV plastic steel material, can be used in outdoor exposure environment for a long time
• Plug in the PIN power cord, effectively isolate water vapor and easy to replace
• Can be used with drilling machines or independently used for water pumping operations such as gardening, fish tank water changes, and water accumulation.
• Powerful motor for high-load line equipment, automatic power-off device for low water level and overheating
• Ball bearing design, durable during high-speed operation
• Mechanical shaft seal, shockproof, and protective cover protect the wire device and prevent it from being immersed in water when placed under water.
• Made in Taiwan

Application scope:

• Multifunctional application in horticulture (non-24-hour continuous operation)
• Gardening and farming irrigation
• Wastewater discharge from small cesspools (tanks)
• Temporary wastewater or stagnant water discharge after rain
• A good helper for water tower cleaning
• Fish tank water change and cleaning
• Cleaning of automobiles and motorcycles

The five-groove, ten-blade cement drill tail drill bit originally imported from France by DIAGER is a five-groove steel bar drill bit that can cut through steel bars. The five-groove hammer drill bit adopts a super-hard alloy cutter head, which can cut through steel bars. It is suitable for use with a hammer drill, and the effect is excellent.

Product Features:

• French DIAGER five-groove ten-edge cement drill tail drill bit, super-hard alloy cutter head, hard material, impact resistance, low wear rate, long life
• Five-groove hammer drill bit, powerful chiseling effect, strong penetration
• The five-groove ten-edge cement drill tail drill bit can easily drill through steel bars below 20mm
• New rotary pressure-reducing groove design facilitates chip removal, patented large double groove design, drilling speed is 25% faster
• 4 precise guides and ten main cutting edges make it easier to crush concrete
• The drill bit can drill holes of various materials, eliminating the trouble of replacing the drill tail.
• Suitable for use with the force-free five-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER five-groove ten-edge cement drill tail drill bit, indestructible even when encountering steel bars
• DIAGER drill tail imported from France

Specifications:

Unit: mm

Exclusive agent ~ DIAGER special cement drill bit imported from France for waterproofing and four-groove cement drill bit for water- stopping . It is SDS PLUS cement drill tail. The upgraded U-shaped groove is suitable for substrates with high moisture content in waterproofing and water-stopping projects, such as high-humidity sand. Stone, remove chips freely . The cutter head is made of shock-resistant carbide material, which is hard and impact-resistant. When used with a force-free 4-channel hammer drill, the effect is first-class.

Product Features:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact resistance, low wear rate, four-groove cement drill tail, upgraded U-shaped groove, suitable for bases with high moisture content in waterproofing and water-stopping projects Material, high humidity sand and gravel, free chip removal, fast drilling speed
• SDS-plus four-groove waterproof drill bit, suitable for use with the power-free 4-groove hammer drill
• DIAGER four-groove waterproof drill bit is suitable for planting reinforcement and chemical anchor bolts. It is a professional drill tail for water-stop construction.
• Diager, a drill bit originally imported from France, is the largest factory in Europe, a professional manufacturer of drill bits, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Product specifications:

The four-groove three-blade cement drill tail drill bit originally imported from France by DIAGER is a four-groove steel bar drill bit that can pass through steel bars. It uses a tungsten steel alloy cutter head, which is hard and impact-resistant. It is indestructible and can penetrate even steel bars. It is a world exclusive patent. One drill can replace 20 drills. When used with a force-free 4-groove hammer drill, the effect is excellent.

Product Features:

• The French DIAGER four-groove three-blade cement drill tail drill bit adopts super-hard tungsten alloy cutter head, embedded with blade, one-piece molding, hard material, impact resistance, low wear rate and long service life.
• New rotary pressure-reducing groove design is conducive to chip removal, and the patented large double groove design is 15% faster
• The overall alloy blade design can automatically position, and the three main cutting edges make it easier to crush concrete.
• Suitable for drilling various materials, eliminating the trouble of replacing the drill bit
• Suitable for use with a force-free 4-groove hammer drill. No need to push forward, just press lightly.
• French DIAGER four-groove three-blade cement drill tail drill bit can drill through steel bars below 12mm and is indestructible when encountering steel bars
• B25 concrete can drill 1500 holes, and 250 holes when encountering steel bars
• The world's exclusive patent, one stick can be used to replace 20 sticks
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Unit: mm

The DIAGER ultra-hard straight-shank cement drill bit imported from France has a high-strength alloy tip, which is impact-resistant and wear-resistant. It can be used on gypsum board, bricks, stones, hard rocks, and cement concrete. Suitable for use with an impact electric drill, making your construction faster and more flexible.

feature of product:

• DIAGER super-hard straight shank cement drill bit/drill tail adopts high-strength alloy blade alloy head, which is impact-resistant and has low wear rate.
• U-shaped groove design for rapid chip removal
• Suitable for use with cordless impact drills for fast and flexible construction
• Suitable for working on drywall, bricks, stone, hard stone, cement concrete
• DIAGER is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Suitable for drilling materials:

Origin:

• France

The DIAGER five-groove six-blade cement drill tail drill bit, originally imported from France, is suitable for five-groove force-free hammer drilling. It is a five-groove steel bar drill bit that can pass through steel bars. The five-groove hammer drill bit adopts super-hard tungsten steel cutter head, which is hard and impact-resistant. The alloy cutter head has a positioning convex point design, which can automatically position , and the shoveling effect is easier to crush concrete. The hole diameter is accurate and the position is not offset. 6 main cutting edges maintain simultaneous cutting in multiple directions, increase drilling speed, and ensure stable and balanced drilling force through automatic positioning.

Product Features:

• The French DIAGER five-groove six-blade cement drill tail drill bit is a drill bit that can drill through steel bars . It uses a super-hard alloy cutter head, which is hard in material, impact-resistant, has a low wear rate and a long service life.
• New grooves strengthen the axial drilling force and enhance the earthquake resistance
• 3 alloy blades, 6 main cutting edges, automatic center positioning, accurate positioning, easier to crush concrete
• The alloy cutter head has a positioning bump design, automatic positioning, circular drilling, and position does not shift
• Special heat treatment to absorb vibration, absorb shock waves and reduce recoil
• Maintain multi-directional cutting at the same time, increase drilling speed, and ensure stable and balanced drilling force through automatic positioning
• Suitable for use with the zero-effort five-groove hammer drill
• DIAGER is the largest drill manufacturer in Europe, a professional drill manufacturer, and the only distributor of drill bits imported from France.

Product Features:

Suitable for drilling materials:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification to reduce the pressure on the drill bit.
• When drilling, it is necessary to maintain a stable pressure and remove the drill bit from the hole frequently to remove debris. Use a slow speed to drill harder materials to extend the life of the drill bit.
• Different drilling speeds are used depending on the model of the electric drill. Generally speaking, regardless of the drill bit specifications, the recommended drill speed is 300-400 revolutions per minute.
• Do not use too much force on the hammer drill when using it. Just use normal force to avoid hand fatigue.

Specifications:

Unit: mm

French original Diager four-groove cement drill bit (SDS-plus four-groove hammer drill bit), suitable for four-groove power-free hammer drilling, shock-resistant carbide head, hard and impact-resistant. The U-shaped groove design facilitates chip evacuation and allows for fast drilling speed.

feature of product:

• French DIAGER four-groove cement drill bit, super-hard tungsten alloy bit, hard material, impact-resistant, low wear rate
• Four-groove cement drill tail, U-shaped groove design facilitates chip removal and fast drilling speed
• Diager SDS-plus four-flute hammer drill bit adopts shock-resistant carbide tip and is suitable for use with the force-free 4-flute hammer drill.
• Diager is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Drilling function:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

DIAGER four-groove cement drill bit (water drill) imported from France, suitable for four-groove power-free hammer drilling, super-hard tungsten steel bit, hard and impact-resistant. The alloy cutter head has a positioning bump design, which can be automatically positioned. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift. The angle of the alloy tip of the four-groove cement drill tail is increased to improve the drilling ability. When used in conjunction with the force-free 4-groove hammer drill, the effect is first-class.

feature of product:

• French DIAGER four-groove power-free hammer drill cement drill bit uses super-hard tungsten steel bit as the drill bit, which is hard material, resistant to impact, has low wear rate and long service life.
• New double large row groove design, rapid mud removal and faster drilling speed
• The angle of the alloy cutter head is increased, and the top angle is designed at 160 ^° to improve drilling capabilities and efficiency.
• The alloy cutter head has positioning bumps that can be positioned automatically. The shoveling effect makes it easier to crush concrete. The hole diameter is accurate and the position does not shift.
• Suitable for dry walls, gradually increasing pressure relief grooves to accelerate chip removal design, fast chip removal
• The four-groove cement drill tail is suitable for use with the four-groove power-free hammer drill.
• Depending on the drilling material, the drilling speed can be 30% faster. The ideal test conditions in the laboratory test that the 8x160 drill tail can drill at least 500 holes.
• DIAGER is the largest manufacturer in Europe, a professional manufacturer of drill bits, drill bits imported from France, and the general agent of Bailishi

Suitable for drilling materials:

Product Features:

Instructions for use:

• Before drilling a deep hole, you must pre-drill a shorter intermediate length hole of the same specification. The drill bit needs to be withdrawn every 10 seconds to allow for heat dissipation.
• When drilling, it is necessary to maintain a stable pressure and frequently remove the drill bit from the drill hole to remove debris. Use a slow speed to drill harder materials to extend the life of the drill bit.
• It is recommended to use a 4kg hammer drill for drilling in B50 cement concrete

Origin:

• France

• Made in Taiwan powerful C-type universal pliers
• The handle body is made of Cr-Mo chromium-molybdenum alloy steel, which will not crack or deform.
• The C-type clamp arm is made of Cr-V special chromium vanadium alloy steel, which has extremely strong clamping force and will not crack.
• The tail end joint of the attached movable piece (movable claw) is fully welded, which will not crack and is more durable.
• Release plate plus plastic sleeve
• Professional craftsman's tool, convenient for fixing various objects, clamping firmly for better construction

  product material:

  • Handle body: Cr-Mo chromium molybdenum alloy steel
  • C-type clamp arm: Cr-V chromium vanadium alloy steel

  Product specifications:

  Product number	Specification	Maximum jaw opening	Maximum clamping range	The deepest jaws
  FM901011(SP)	11"(279mm)	102mm	102mm	94mm

• Air blower made in Taiwan (hole cleaning air bag, hole clearing air blower, chemical anchor bolt and reinforcement hole cleaning air blower, anchor bolt installation accessories air blower, special air blower for reinforcement hole planting, special hole cleaning air blower for reinforcement reinforcement)
• Remove dust from holes after drilling
• Hoses provide adequate removal of deep debris
• 360° freely adjustable
• Cleaning holes after cement drilling can increase the bonding strength of Anka

Product specifications:

Originally imported from Japan ICHINEN CHEMICALS Company, Lubricating 303 anti-rust lubricating penetrating agent (penetrating anti-rust lubricating oil/anti-rust lubricant) has anti-rust, lubrication, penetrating and other functions. The 2-purpose nozzle cover design has good rust resistance and permeability, and has low odor. It is no problem to spray upside down.

Product Features:

• Originally imported from Japan's ICHINEN CHEMICALS company, Lubricating 303 anti-rust lubricating penetrating agent has good rust resistance and permeability.
• Lubricating 303 anti-rust lubricating penetrating agent can quickly penetrate the corroded metal surface and exert a lubricating effect on the rusted metal bottom layer.
• Lubricating 303 anti-rust lubricating penetrating agent is sprayed on rusted bolts and nuts, which can penetrate immediately and operate easily.
• Low odor type to reduce unpleasant odors at work
• Unique dual-purpose cap design, no need to replace nozzles
• Penetrating anti-rust lubricant can be sprayed upside down, making it easy to spray even in small areas

Anti-rust and lubrication performance tests under different environments: 

Product Usage:

• Anti-rust, lubrication and penetration of automobiles, motorcycles, bicycles and mechanical parts

internal volume:

• 420ml

• Chrome vanadium alloy steel material, made of heat treatment technology
• Super hard, high toughness, wear resistance, high durability, precise dimensions
• Double-ended screwdriver head design, one-piece molding (except 25mm)
• Under normal use , the torque can reach 130 kg/cm ²

Product specifications:

Origin:
Taiwan

Originally imported from Japan's ICHINEN CHEMICALS company, the brake disc cleaner is a quick-drying, powerful oil-removing cleaning agent with excellent cleaning effects. Brake disc cleaner can be sprayed upside down. It is a chemical detergent with low toxicity and is not corrosive to metal. It can quickly remove oil stains, anti-rust oil and cutting oil from metal parts, metal molds, precision machines, etc.

feature of product:

• Quick drying, excellent cleaning effect, low toxicity chemical detergent
• Can quickly remove oil stains, anti-rust oil and cutting oil from metal parts, metal molds, precision machines, etc.
• Remove grease stains from gears, bearings, etc.
• Not corrosive to metals
• Little impact on various resins and rubbers

Be applicable:

• Clean anti-rust oil and cutting oil on metal parts, metal molds, tools, etc.
• Remove grease stains from gears, bearings, etc.
• Remove oil stains from hydraulic machines, cylinders, etc., remove oil stains with strips, and clean precision machines
• Clean around the brakes of cars, forklifts, etc.

Product specifications: 840ml

Origin: Made in Japan

Special wall panel expansion nails (wall panel expansion nails/expansion screws/hollow geckos/expansion screws) are used for fixing gypsum boards, light partitions, and calcium silicate boards . They are used in situations where self-tapping screws and general expansion screws are not applicable . For example, when hanging light steel frame partition walls, self-tapping screws cannot be used due to insufficient screw holding force on the panel, and ordinary expansion screws cannot be used due to the hollow structure inside the wall. However, using wall panel expansion nails can achieve good results.

The hollow wall anchor structure of the wall panel expansion nail consists of a dish-head screw and a sleeve with a support plate that can be expanded. During installation, first drill a hole on the wall panel with the same size as the outer diameter of the sleeve, insert the wall panel expansion nail into the hole, and then use the wall panel expansion device to pull out the screw. At the same time, the fixing plate on the sleeve will open to fix the sleeve to the wall panel, remove the inner screw, put on the fixing part, and then lock the inner screw.

Product Features:

• It is used for gypsum board, hollow board, calcium silicate board wall and other objects that need to be fixed. It can be used as a base after expansion, which is stable and reliable.
• Quick installation, special tie rods for controlled installation
• Umbrella-shaped opening prevents the anchor bolt from spinning in the hole
• Best firmware for hanging and hanging

use:

• Used to fix floor panels, decorative strips, groove/track strips, etc.

Substrate:

• Hollow brick, gypsum board partition wall (light partition), calcium silicate board

Product Material:

• Casing: CQ2 iron
• Screws: 1006/1008 iron, galvanized

This nail gun is used for special wallboard expansion screws for plaster boards, light partitions, and calcium silicate boards. It is suitable for situations where self-tapping screws and general expansion screws are not suitable . Construction and operation are very convenient and fast, and the workpiece will not be damaged.

feature of product:

• Taiwan-made wallboard nail puller (wallboard nail puller, hollow gecko puller, hollow expansion bolt nail puller)
• Manual rivet gun, only one side of the riveting work can be completed
• Construction and operation are very convenient and fast, and will not damage the workpiece
• Suitable for construction in parts that cannot be reached by hand or jacking iron
• Progressive auxetic, labor-saving and rapid auxetic fixation
• Suitable for various auxetic nail specifications M4, M5, M6
• Need to be used in conjunction with wallboard auxetic nails

Material:

• TPR+PP material

Applicable specifications:

• M4 (6-32mm thickness gypsum board)
• M5 (10-24mm thickness gypsum board)
• M6 (1/4"-20mm thickness gypsum board)

Origin: Taiwan

Swiss Kraftwerk 2W CREE SMD LED + 2W COB LED IP67 lightweight aluminum alloy shell waterproof rechargeable LED flashlight work light, the top is a 2W CREE high-brightness SMD LED light, the LED flashlight body lighting uses 2W COB LED, fast heat dissipation and high power .

The LED flashlight work light is made of a solid aluminum alloy casing, which is lightweight and easy to hold and operate. LED flashlight work light lighting fixture has IP67 waterproof design and overcharge/over-discharge circuit protection device. The LED body has a 120° wide-angle lighting design and a wider irradiation range.

The LED flashlight work light is equipped with 2 rechargeable lithium batteries, allowing you to replace them at any time during work without fear of interruption.

feature of product:

• Swiss Kraftwerk 2W CREE SMD LED + 2W COB LED IP67 lightweight aluminum alloy shell waterproof rechargeable LED flashlight work light, contains 2 rechargeable lithium batteries, can be used for 6 hours after full charge
• Made of solid aluminum alloy casing, light weight and easy to use
• 2W COB LED, made of high-brightness white light 120° wide-angle LED chip light board
• The top is made of 2W CREE high-brightness SMD eye-protecting warm white LED, which is not dazzling.
• The handle of the work light has two separate buttons, making it easy to hold and operate.
• The work light has lamp panel protection, battery overcharge protection, short circuit protection and shunt charging functions.
• Work light shunt charging can charge 2 batteries at the same time and detect current conditions
• Intelligent switching charging mode
• Top 2W CREE CREE SMD LED, brightness: 120~150 lumens
• Main body CREE SMD LED, 350 ~ 380 Lux (1m), brightness 180 ~ 210 lumens

Product specifications:

Originally imported from Switzerland, Mungo brand MB series frame uses plastic anchors, including nylon bolt sleeves + galvanized screws.

feature of product:

• Swiss Mungo MB plastic anchor bolts for the frame, nylon anchors for the frame with galvanized screws, nylon anchors plastic geckos, nylon anchors
• ETAG 020 European technical standard for non-substructural uses in concrete and masonry structures
• Fire resistance test certification F90 for fixed curtain wall systems
• Suitable for porous bricks, masonry and aerated concrete
• Autoclaved aerated concrete (AAC): Drilling hole - diameter 9mm, installation depth 90mm
• MB has an extended extension area suitable for use in low density materials and hollow bricks
• Drill-in protection to prevent premature expansion during installation
• The double wings of the nylon nail cover prevent the anchor bolt from rotating in the drill hole.
• Extra-long expansion tube is formed in one piece, the length can reach 300mm
• Nylon nail covers are made of high quality polyamide PA6
• penetrating fixation
• For indoor (galvanized) and outdoor (stainless steel) applications
• Imported from Switzerland

product material:
High quality polyamide (Polyamide PA6)
Screws: galvanized

Applicable substrate:
Suitable for various types of building materials, such as aerated concrete, hollow bricks, and gypsum boards

Product Usage:
External wall fixed, fixed under structure

Originally imported from Switzerland, Mungo brand MNA percussive nylon quick nails, also known as nylon nails, nylon nails, grid nails or vertical grid nails, are hardware tools that can fix objects on the wall or ceiling.
Utilizing the elasticity of nylon material, it can expand in the hole after knocking, forming friction, so that the object and the wall are closely combined, replacing the trouble of buying plastic plugs and nails. The combined nylon quick knocking nails eliminate the need for Save you the trouble and make your construction faster.

feature of product:

• Swiss percussion nylon quick nails (percussion nylon quick nails, percussion nylon plastic screws, percussion nylon screws, percussion nylon screw screws, percussion Anka anchors)
• Easy installation of percussion nylon quick nails
• Percussion nylon plastic geckos are suitable for penetrating fixation
• High knock load force increases bolt sleeve gripping force
• Angled-headed percussion nylon gecko screws

product material:
High quality polyamide (Polyamide PA6)
Screws: galvanized

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, bricks, and natural stone

Product Usage:
wooden structure, skirting boards, frame

Originally imported from Switzerland, Mungo brand MNL series long-sleeved nylon nail covers and nylon bolt covers are plastic anchor bolts, also known as nylon anchor bolts, plastic plugs, plastic geckos, nylon anchor bolts, and nylon wall bolts.

feature of product:

• Original Swiss imported Mungo MNL long-sleeved nylon nail covers, long-sleeved nylon bolt covers, nylon anchor plastic plugs, plastic geckos, plastic anchor bolts, nylon anchor bolts
• Long-sleeved nylon nail sets are suitable for screw types: wood screws, gypsum board (plywood) screws, hexagonal screws
• Suitable for penetrating fixation
• Long sleeves to avoid color side steps
• Fixation of optimal frame etc.

product material:
High quality polyamide (Polyamide PA6)

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, bricks, limestone bricks, natural stone, and gypsum board

Product Usage:
Frame fixed, suitable for knock-on screws

Originally imported from Switzerland, Mungo brand MN series nylon bolt sleeves and nylon nail sleeves are plastic anchor bolts, also known as nylon anchor bolts, plastic plugs, plastic geckos, nylon anchor bolts, and nylon wall bolts.

feature of product:

• Knock protection design prevents premature expansion during installation
• Secure the plug sleeve securely in the hole to prevent rotation and ensure immediate grip when the plug sleeve expands
• M-shaped patented tooth wave ensures smooth advancement of the screw and complete radial expansion
• Prevents the plug sleeve from breaking when inserted into the hole
• High quality PA6 nylon material
• Suitable for surface fixation or penetrating fixation
• Applicable screw types: wood screws, gypsum board (plywood) screws, hexagonal screws
• Suitable for most types of building materials, especially solid building materials

product material:
High quality polyamide (Polyamide PA6)

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, bricks, limestone bricks, natural stone, and gypsum board

Product Usage:
Photo frame fixing, light stand fixing, support frame, electrical switch, railing fixing

Originally imported from Switzerland, the Mungo brand MU series multi-purpose nylon bolt sleeves and nylon nail sleeves are plastic anchor bolts, also known as nylon anchor bolts, plastic plugs, plastic geckos, nylon anchor bolts, and nylon wall bolts.

feature of product:

• Multi-purpose, promotes agglomeration forming
• Knock protection to prevent premature expansion during installation
• Self-expanding force prevents the nylon nail sleeve from rotating in the drill hole
• High quality PA6 nylon material
• Suitable for penetrating fixation or surface fixation
• Applicable screw types: wood screws, gypsum board (plywood) screws, hexagonal screws

product material:
High quality polyamide (Polyamide PA6)

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, bricks, hollow bricks, plywood, gypsum board, light steel frame

Product Usage:
Support frame, electrical switch, railing fixation, photo frame fixation, light stand fixation

feature of product:

• Multi-purpose, promotes agglomeration forming
• Knock protection to prevent premature expansion during installation
• Self-expanding force prevents the nylon nail sleeve from rotating in the drill hole
• High quality PA6 nylon material
• Suitable for penetrating fixation or surface fixation
• Applicable screw types: wood screws, gypsum board (plywood) screws, hexagonal screws

product material:
High quality polyamide (Polyamide PA6) 

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, bricks, hollow bricks, plywood, gypsum board, light steel frame 

Product Usage:
Support frame, electrical switch, railing fixation, photo frame fixation, light stand fixation

Origin:
Switzerland

feature of product:

• Swiss original auxetic anchor, auxetic anchor bolt
• Suitable for wet areas and outdoors
• Torque controlled expansion
• Comply with DIN 125A standard, hot dip galvanized >40μm
• Suitable for surface fixation or penetrating fixation

Be applicable:

• Bridges, railings, steel structures, machinery, elevated, unconstructed projects

feature of product:

• Original Swiss (seismic auxetic gecko, expansion bolt)
• European ETA CE Option1 technology certification, eccentric expansion design works perfectly in cracked concrete
• According to DIN 50221 standard, the minimum corrosion resistance is 24Oh
• Unique torsion wings prevent sliding in the hole
• Additional expansion ring on the expansion ring to enhance gripping power
• Special round ends and mechanical expansion ring for easy installation
• Special alloy steel provides excellent bending ductility and high load-bearing capacity
• Suitable for surface fixation or penetrating fixation

Be applicable:

• Railings, construction steel, profiles, machinery, unbuilt projects, elevated, cable launch boxes

installation method:

feature of product:

• Swiss original gravity-type anchor bolt (expandable anchor bolt, auxetic metal anchor)
• European ETA CE Option1 technical certification
• Waterproof grade F30-F120
• Pre-assembled hexagonal screws
• Retractable plastic block easily locks onto any substrate
• Torque controlled expansion
• Penetrating fixed anchor

Be applicable:

• Application: machinery, bridges, pipelines, doors, unconstructed projects, railings