Originally imported from Switzerland, the Mungo brand MWT washbasin fixing anchor bolt is suitable for fixing washbasins, urinals and other bathroom equipment.

feature of product:

• Originally imported from Switzerland, Mungo MWT washbasin fixing Ankh anchors, Ankh anchors for bathroom equipment, nylon gecko screws for washbasins, plastic Ankh anchors
• Suitable for all kinds of building materials
• Suitable for fixing washbasins, urinals and other bathroom equipment
• Suitable for surface mounting

High quality polyamide (Polyamide PA6)

Applicable substrate:
Suitable for various types of building materials, such as concrete, sandstone, aerated concrete, hollow bricks, bricks, and natural stone

Product Usage:
Wash basin, fixed urinal

Swiss original percussion nylon quick nails (nylon quick percussion nails, nylon plastic anchors, nylon gecko screws, nylon screw anchors, percussion nylon Anka anchors) are now the most commonly used, easy to construct and install, replacing ordinary purchases Plastic plugs don't have to worry about buying nails. The combined quick nails save you the trouble and make the construction faster. 

feature of product: 

• Quick and easy installation, high stability
• Easy and reliable installation
• Use a hammer to install and secure
• Provides quick knock protection, high knock load force to increase bolt sleeve gripping force
• High quality PA6 nylon material
• Penetration fixed mode
• Suitable for wood, corrugated board, brick wall, cement wall

Packing quantity:
100 pieces

Origin:
Switzerland

feature of product:

• Swiss imported nylon quick nails for DIY (nylon quick knock nails, nylon plastic geckos, nylon gecko screws, nylon screw geckos, percussion anchors)
• Quick, easy and easy to install
• Suitable for penetrating fixation
• High knock load force increases bolt sleeve gripping force

Applicable substrate:

• Concrete, sandstone, bricks, hollow bricks, natural stone

Product Usage:

• wooden structure, skirting boards, frame

installation method:

Product specifications:

Technical Information:

Allowable load (kN)

Safety factor: 5 / 1kN=100kg

An excellent export product made in Taiwan, it is made using S2 special alloy steel heat treatment technology. It is super hard, has high toughness, wear resistance, high durability and high torque. The one-piece double-headed screwdriver head design is magnetic and can absorb screws without falling off. The work efficiency is excellent. It can be used with all kinds of cordless screwdrivers, tapping machines or cordless electric drills. It is not limited to a single brand, making it more convenient to use.

feature of product:

• Platinum steel screwdriver bits made in Taiwan (S2 alloy steel screwdriver bits, double-ended screwdriver bits)
• S2 special alloy steel material, made of heat treatment technology
• Electroplated surface mirror treatment, highlighting the noble texture
• Super hard, high toughness, wear resistance, high durability, precise dimensions
• Double-ended screwdriver head design, molded in one piece
• Under normal use, the torque can reach 230kg/cm ²
• Excellent quality, lowest price, welcome to purchase in large quantities

• Hexagonal casing gecko, 204 white iron expansion screw
• Generally used on concrete and walls

Product specifications:

Material:

Origin:
Taiwan

• Drill tail screw, 204 white iron plate head with fine thread
• Generally used in water and electricity decoration, it can lock white iron plates with a thickness of less than 1+2mm. It is often used to lock doors, windows and hinges.
• Self-tapping screws are self-drilling screws that can be drilled into building materials by themselves and do not require pre-drilling holes.

Product specifications:

Material:

Origin:
Taiwan

• Hexagonal screw nut with washer, 304 white iron fixing bolt set
• Generally used to connect two objects, usually through light holes. Bolts and nuts are required to be used together. A single one cannot connect.

Product specifications:

Material:

Origin:
Taiwan

• Drill tail screw, 410 white iron large flat head iron die
• Generally used in water and electricity decoration, often used in carpentry
• Point-tail screws are self-drilling screws that can be drilled into building materials by themselves without pre-drilling.

Product specifications:

Material:

Origin:
Taiwan

• Drill tail screw, 304 white iron large flat head iron die
• Generally used in water and electricity decoration, often used in carpentry
• Point-tail screws are self-drilling screws that can be drilled into building materials by themselves without pre-drilling.

Product specifications:

Material:

Origin:
Taiwan

• Hexagonal flat head gecko, 204 white iron flat head expansion screw
• Generally used on concrete and walls

Product specifications:

Material:

Origin:
Taiwan

• Percussion nylon nails, 410 white iron lightning quick nails
• Generally used in water and electricity decoration, it can be directly tapped and locked on the cement wall after being used with a cement drill bit to guide the hole.

Product specifications:

Material:

Origin:
Taiwan

• Wood tapping screws, 410 white iron trumpet head inner plum T25 high and low thread wood screws
• Generally used in carpentry, often used in hard wood, outdoor wooden planks

Product specifications:

Material:

Origin:
Taiwan

• Drill Screws, 410 Stainless Steel Hexagon Head Fine Thread
• Generally used for roof corrugated board, can lock tinplate within 2mm thickness
• Self-tapping screws are self-drilling screws that can be tapped into building materials without pre-drilling.
• The self-drilling screw with plastic washer has stronger bite force and is not easy to loosen

Specifications:

Origin:
Taiwan

• Drill tail screw, 410 white iron cross coarse thread
• Generally used in roof corrugated sheets, it can lock white iron sheets within 2mm thick.
• Self-tapping screws are self-drilling screws that can be drilled into building materials by themselves and do not require pre-drilling holes.

Product specifications:

Material:

Origin:
Taiwan

• Drill tail screw, 410 white iron round head coarse thread
• Generally used in water and electricity decoration, it can lock white iron plates within 1+2mm thick. It is often used to lock doors, windows and hinges.
• Self-tapping screws are self-drilling screws that can be drilled into building materials by themselves and do not require pre-drilling holes.

Product specifications:

Material:

Origin:
Taiwan

• Drill tail screw, 410 white iron pan head with fine thread
• Generally used in water and electricity decoration, it can lock white iron plates within 1+2mm thick. It is often used to lock doors, windows and hinges.
• Self-tapping screws are self-drilling screws that can be drilled into building materials by themselves and do not require pre-drilling holes.

Product specifications:

Material:

Origin:
Taiwan

White iron screw knock-type nylon quick nails, also known as nylon nails, nylon nails, grid nails or vertical grid nails, are a convenient, efficient and multifunctional fixing tool specially used for fixing objects on walls or ceilings.

White iron screws are not easy to rust, and have nylon elastic properties that can automatically expand and form friction after being struck to ensure a firm connection between the object and the wall, improving convenience and efficiency, allowing you to complete various fixing tasks more quickly .

White iron screw knock-type nylon quick nails are not only convenient and fast, but also avoid the trouble of purchasing additional plastic plugs and nails during the construction process.

feature of product:

Origin:
Taiwan

白鐵螺絲螺帽組是廣泛應用於機械、建築及家具安裝的理想選擇。這些螺絲通提供圓頭(丸頭)設計，圓頭螺絲/丸頭螺絲具有平滑圓潤的外觀，適合美觀需求。搭配白鐵材質，這些螺絲螺帽組具有優異的耐腐蝕性，確保長期穩定的使用。無論是重型設備還是日常家居安裝，白鐵螺絲螺帽組都能提供牢固可靠的固定效果。

產品特色：

• 圓頭螺絲，附螺帽及華司組，304白鐵固定螺栓組
• 一般使用於連接兩個物體，通常是通過光孔，需要螺栓和螺母配合使用，單個不起連接作用

產品規格：

材質：
304白鐵
表面處理：洗白

產地：
台灣

• Straight shank tungsten steel hole drill (straight shank tungsten steel hole drill, straight shank tungsten steel hole drill) made in Taiwan, Japanese steel tungsten steel sheet, super hard, wear-resistant, sharp
• Straight handle tungsten steel circular hole saw with chip guide and grooving, less likely to accumulate chips and smooth processing
• The grinding of tungsten steel sheets adopts an alternating type, which reduces the contact area between internal and external grinding, has low resistance and enhances cutting ability.
• The width of the tungsten steel sheet is relatively wide, the welding surface is wide and firm, and it will not fall off easily.
• The steel structure of the knife holder is thicker than ordinary and tough and not easy to break.
• Adopting a straight tube structure, it can penetrate two holes (within 50mm) at one time
• Straight handle tungsten steel circular hole saw maximum cutting capacity stainless steel sheet 5mm thick
• There is a spring in the center, which can pop up the round iron piece quickly and neatly.
• Suitable for stainless steel plates, steel plates and other metal plates

※ 15mm and 16mm tungsten steel circular hole saws do not come with springs

• Straight shank drill bit set, metal, woodworking, cement drill bits, three uses, satisfied at one time
• Metal drill bit, made of HSS high-speed steel, precision ground and manufactured, long service life
• Cement drill bit, tungsten steel bit with high-strength alloy blade at the top of the bit
• Woodworking drill bit, made of medium carbon steel, center tip design, fast drilling speed
• Rapid chip removal and chip groove design
• ABS storage box makes it more convenient to store drill tails
• Suitable for use with electric drill

• Safe, dust-proof and droplet-proof, the goggles have a longer service life
• Adjustable frame legs design, bend the frame legs according to your needs
• Covered safety goggles, protective glasses design, can be worn with glasses at the same time
• Suitable for protective use in horticulture, laboratories, construction, industry, etc.
• Made in Taiwan

• Made in Taiwan, short arm hexagonal wrench (hexagonal wrench, short hexagonal wrench, flat head wrench, flat head hexagonal wrench, six ling wrench)
• Lightweight and easy to use, the best tool for use in narrow spaces
• Made of chromium-molybdenum alloy steel, HRC hardness 54-58 degrees, high torque, high durability
• High hardness, super easy to use
• Made in Taiwan, quality guaranteed

  Product number	Specifications (mm)			Weight(g)
  	A	B	C
  FM871015	1.5	14	45	0.9
  FM87102	2.0	16	50	1.8
  FM871025	2.5	18	56	3
  FM87103	3	20	63	5
  FM87104	4	25	70	10
  FM87105	5	28	80	18
  FM871055	5.5	30	85	twenty four
  FM87106	6	32	90	30
  FM87108	8	36	100	60
  FM87110	10	40	112	105
  FM87112	12	45	125	170
  FM87110	14	56	140	265
  FM87112	17	65	160	442
  FM87110	19	70	180	631

Special wallboard auxiliary screws (wallboard pull nails/auxetic screws/hollow geckos/expansion screws) for gypsum boards, light partitions, and calcium silicate boards are used in situations where self-tapping screws and general expansion screws are not suitable. . For example, in the problem of hanging light steel frame partition walls, self-tapping screws cannot be used because the screw holding force of the panel is insufficient, and the hollow structure in the wall cannot use ordinary expansion screws. However, wallboard auxiliary screws can be used. Get very good results.

The wallboard auxiliary screw has a hollow gecko structure, a pan-head screw and a sleeve with a fixing piece that can be opened. During installation, first drill a hole in the wallboard with the same size as the outer diameter of the sleeve, insert the entire wallboard auxiliary screw into the hole, and then use the wallboard auxiliary puller to pull out the screw. At the same time, the fixing piece on the sleeve It will open and fix the sleeve to the wall board, remove the inner screws, put the fixings on, and then lock the inner screws.

feature of product:

• Used for gypsum board, hollow board, calcium silicate board wall and when items need to be fixed. After auxetic expansion, it can be used as a base, which is stable and reliable.
• Quick installation, special pull rods for control installation
• The umbrella-shaped opening prevents the anchor bolt from spinning in the hole.
• The best firmware for upside-down and county cranes

use:

• Used to fix flooring materials, decorative battens, groove/rail slats, etc.

Base material:

• Hollow bricks, gypsum board partition walls (light partitions), calcium silicate boards

product material:

• Casing: CQ2 iron material
• Screws: 1006/1008 iron material, surface galvanized

Perform industrial inspection work with ease! Rigid industrial endoscopes (gun-type industrial endoscopes, gun-type rigid tube endoscopes, industrial inspection endoscopes) made in Taiwan are specially designed for industrial inspection, whether it is mechanical internal or parts inspection, gun-type hard tube industrial Both endoscopes provide excellent visual resolution and operational flexibility.

Rigid industrial endoscopes are rugged and durable and can meet the challenges of various industrial environments. Whether it is a small space or equipment with complex structures, rigid industrial endoscopes can easily handle it and help you accurately detect and diagnose problems.

The 5.5mm diameter lens of the rigid industrial endoscope can be made into 3 modes: 0°, 90° side-viewing close-range and 90° side-viewing extremely close-range. 0° is suitable for viewing objects in front, and 90° side-viewing is suitable for Observe objects at close range.

feature of product:

• Replaces the old hard-tube industrial endoscope to visually measure objects.
• Gun-type rigid tube endoscope, the test object is displayed on the screen, making it easy to interpret.
• The 5.5mm lens has a 0° viewing angle to view the front, and the viewing angle is 54°.
• 5.5mm lens 90° rigid tube endoscope, with two focal length ranges of 4mm-5mm/10mm-16mm available. The 4mm - 5mm focal length is suitable for very close objects, and the 10-16mm focal length is suitable for short-distance inspection.
• Suitable for inspection of precision machinery, automobile parts, engines or smooth inner tube objects.
• 5.5mm lens, 90° focal length, 4mm-5mm rigid tube endoscope, LED light designed with diffused light, which will not cause white exposure due to reflection from smooth objects.
• Resolution: 5.5mm lens: 300,000 pixels / 3.9mm lens: 160,000 pixels.
• Dustproof and water-proof lens.
• The gun-type grip is detachable.

Scope of application:

• Equipment inspection and maintenance: bearings, pipelines, printers, molds, lathes
  
• Quality control: incoming material inspection, finished product shipping inspection
• Factory production line: inspection of process items, confirmation of wafer process, repair of defective circuit boards
• Engineering/R&D: Engineering record reports, problem analysis record reports, communication with customer products

Product specifications:

Note: If you need rigid industrial endoscopes, please call or email us.

掉落縫隙的救星！磁吸 + 抓取雙功能

這款台灣製造的「龍抓手」具備可彎曲軟管，能深入沙發底、水管、引擎室等狹窄死角，是撿拾小零件或物品的好幫手。

產品特色：

• 強磁吸附：前端內建釹鐵硼磁鐵，輕鬆吸起螺絲、鑰匙等金屬物。
• 四爪抓取：按壓即伸出四爪，搭配強力彈簧，抓握異物更穩固。
• 靈活彎折：700mm 加長型金屬軟管，可自由彎曲定型，直達死角。

 產品規格：

• 長度：700mm
• 重量：115g
• 材質：金屬軟管、釹鐵硼磁鐵、塑膠手柄
• 產地：台灣

I drilled, drilled, drilled, drilled, alas, the screw fell off again. How can I fix the screw and let me work once? With the magnetic screw holder, you don't have to worry about drilling once. This eliminates the inconvenience of screws falling off when initially drilling, effectively improving efficiency.

feature of product:

• The magnetic screw holder can correctly fix the screws without being too tight or too loose, ensuring the quality of the work.
• Magnetic screw holder fixes the screws not easily falling off
• Screw magnetic holder, permanent magnetic design
• Suitable for screws of any length and easy to operate
• The magnetic screw holder comes with a professional unloading screwdriver, which is 6 times more durable.
• Suitable for weak electricity, communications, surveillance, water and electricity, electrical machinery, carpentry and DIY use
• Made in Taiwan

Replacement blades for air conditioning pipe grooving cutters, suitable for air conditioning installation and repair, providing precise and efficient pipe cutting. The replacement blade of the pipe groove cutter for air conditioners can easily cut the air conditioner covered copper pipes, water pipes, etc., ensuring construction accuracy and quality.

Product Features:
- Smooth cut, no burrs

👉 Suitable for 140mm air conditioner pipe groove cutter

Specifications:
- Overall length 205mm
- Blade hardness HRC50~54

Replacement blades for air conditioning pipe grooving cutters, suitable for air conditioning installation and repair, providing precise and efficient pipe cutting. The replacement blade of the pipe groove cutter for air conditioners can easily cut the air conditioner covered copper pipes, water pipes, etc., ensuring construction accuracy and quality.

Product Features:
- Smooth cut, no burrs

👉 Suitable for 140mm air conditioner pipe groove cutter

Specifications:
- Overall length 205mm
- Blade hardness HRC50~54

Provide high-quality industrial endoscope pipeline cameras (pipeline inspection cameras, in-pipe cameras, in-pipe inspection cameras, in-pipe inspection endoscopes), which can be used for pipeline detection, pipeline obstruction detection and pipeline inspection. Special industrial endoscope pipeline detectors for pipelines can provide you with accurate and efficient solutions.

The built-in SD memory card of the tunnel endoscope camera can store photos and images, which can be viewed and browsed immediately after the shooting is completed, or transferred to a computer. The main unit is equipped with an AV terminal port, which can transmit endoscope images to the TV, which is very convenient to use.

The tube endoscope camera made in Taiwan has CE/FCC certification and is of reliable quality. The product is equipped with a 300,000-pixel (real pixels, not ordinary simulated pixels) 25mm lens coil, and the image is super clear. Contains an adjustable light source that allows you to see in the dark. It is suitable for pipeline inspection, gas pipes, oil pipelines, drainage pipes and factory piping inspection. It can understand pipeline cracks, scratches and rust damage of drainage pipes. and blockage conditions.

In order to save costs, some endoscope products use disposable dry batteries. Because endoscopes consume a lot of power, the subsequent result is that you have to spend money to buy batteries, which is not environmentally friendly and hurts your wallet. The pipeline inspection camera uses a non-keyed battery or a dry cell battery. It uses a replaceable rechargeable lithium battery, which can be recharged and charged and discharged more than 600 times. It is more environmentally friendly and economical than other general disposable batteries.

The tube endoscope camera has a 2-photo comparison function, allowing you to compare photos before and after repair, making it easier to discuss work with partners or explain to customers, allowing you to communicate with zero errors.

feature of product:

• Pipe endoscope cameras made in Taiwan (pipeline inspection cameras, in-pipe cameras, in-pipe inspection cameras, pipeline detectors, in-pipe inspection peepscopes, pipe-specific industrial endoscopes)
• Professional grade industrial endoscope, 3.5" TFT LCD screen, capable of dynamic photography/static photography storage, super easy to operate
• Using a 300,000-pixel high-resolution 25mm CMOS lens and high-quality optical lenses, the full-focus lens includes a super wide angle of 140 ^° , a normal lens of 73 ^° , a focal length of 5-60 cm, and a super clear field of view.
• Equipped with camera and video functions, the system is equipped with a 4GB SD memory card, allowing you to browse and view stored photos and videos at any time
• Highly sensitive 12 powerful white LEDs, the brightness can be adjusted, and the dark corners can be clearly displayed
• 2x digital zoom, multiple languages ​​available
• Gooseneck design at the front of the lens makes it easier to turn corners
• Can be output to TV and computer for viewing
• Use high-capacity lithium battery with long life
• IP67 dustproof and waterproof coefficient
• Snake tube length selection: 5M ~ 50M
• The fiberglass pipe material is a coiled pipe, which has strong support, sufficient uprightness, and no ductility. The push and pull force of the coiled pipe can be increased between the pipes (there are also coiled pipes made of other materials to choose from)
• The product includes a reel and a high-grade aluminum portable box, which is convenient for storage and has good product protection.
• Suitable for pipeline inspection and maintenance of pipelines, sewage pipes, air ducts, gas pipes, oil pipelines, and drainage pipes

Product specifications:

※Pipeline inspection cameras are custom-made. If you need other lengths, please call or email us.