Sort by:
734 products
734 products
- Drill tail screws, pan head fine thread screws
- Generally used in water and electricity decoration, it can lock iron plates within 1+2mm thick, and is often used to lock doors, windows and hinges.
- Self-tapping screws are self-drilling screws that can be drilled into building materials by themselves and do not require pre-drilling holes.
Product specifications:
| ● | M4 x 13 |
| ● | M4x16 |
| ● | M4 x 19 |
| ● | M4 x 25 |
| ● | M4x38 |
Material:
Origin:
Taiwan
- Made in Taiwan ball hex wrench set
- Made of chromium-molybdenum steel, heat treatment technology, high torque
- Super hard, high toughness, wear resistance, 3 times more durable
- Hardness 55~63 degrees
-
PP resin storage cover, easy to store, a good helper for professional construction
B+BTec glass chemical anchors imported from the Netherlands (chemical anchors, chemical anchors, anchor reinforcement chemical tubes, chemical bolt anchors, chemical anchors), can be used for underwater construction, and are suitable for various vibration loads , foundation bolts, steel plate fixation, and reinforcement. It is quickly consolidated after installation and has high bearing capacity.
Obtained ETA European Technical Approval Certification, which is similar to ICC-ES AC58 / AC308 (formerly known as ICBO) and ASTM E 1512.
feature of product:
- Dutch B+BTec glass chemical anchors, unparalleled fastening power, cannot be replaced by any Anka
- Rotating the implant instantly cleans the hole wall, mixes glass and quartz particles, carves the wall surface and quickly removes dust.
- The risk of failure rate can still be maintained to a minimum when performed by non-permanent professional staff ~ almost "zero"
- Providing accurate dosage and equal-proportion mixing guarantee
- Construction temperature ranges from -5℃ to 40℃, wide application range
- Glass chemical anchors (chemical anchors) are suitable for heavy loads and various vibration loads
- Glass chemical anchors (chemical anchors) are suitable for various operations and underwater construction (can be used in humid environments)
- Glass chemical anchors (chemical anchors) are suitable for small spacings, margins and narrow spaces
- Glass chemical anchors (chemical anchors) do not produce compressive stress on concrete and can be used on various base materials
- Glass chemical anchors (chemical anchors) are completely bonded to the structure, resistant to vibration and heat, not weathered, not aged, acid and alkali resistant, and corrosion resistant
- Glass chemical anchors (chemical anchors) provide the shortest hardening time and greatly improve efficiency
- Non-parallel expansion reaches maximum gripping force
- The creep life has actually been proven to exceed 40 years, with no failure record.
- The only number of pull-out tests after installation is almost single digits, and it is currently the safest construction method.
- Taking quality assurance, follow-up service and testing costs into consideration, it is actually the most economical gravity-type fixed series.
- The longest retention period (more than two years)
Application scope:
- No steel bars are reserved for new construction projects, such as atrium garden railings, continuous walls, beams, columns, floor slabs, etc.
- Addition, renovation, engineering change design or structural reinforcement of old buildings
- Ports, bridges, high-load structures
- Shade project
- It can fix heavy machinery equipment, wall panels and crane tracks, safe and reliable
Installation steps instructions:
- Drill holes in concrete using a power hammer drill using the recommended hole diameter and depth.
- Use a diamond drill to drill holes where the steel bars need to be penetrated.
- Use a brush, blower or water to clean the hole.
- Check the chemical anchor agent tube to confirm that it is not damaged and that the resin inside can flow normally.
- Insert the medicine tube into a clean hole with the round head facing inward.
- Make sure the screw is clean, use the installation tool and electric hammer drill to rotate the screw to the bottom of the hole at a uniform speed (it is recommended that the electric hammer drill speed is 250-500rpm) to rupture the medicine tube and allow the medicine to be fully mixed.
- Check whether there is any chemical overflow on the surface of the hole to ensure that the hole is full; check whether the screw burial depth reaches the surface of the base material to ensure that the screw reaches the required burial depth.
- Wait for the agent to cure according to the recommended curing time. During this period, do not collide or knock the chemical anchors.
- Install artifacts
Origin: Netherlands
An excellent export product made in Taiwan, the blue gold steel double-ended long groove screwdriver bit is made of S2 special alloy steel heat treatment technology. It is super hard, high toughness, wear-resistant, high durability and high torque.
The one-piece long-groove double-head screwdriver head design is magnetic and can absorb screws without falling off, making the work efficiency first-rate. It can be used with all kinds of Japanese-style cordless screwdrivers, tapping machines or cordless electric drills. It is not limited to a single brand and is more convenient to use.
feature of product:
- S2 special alloy steel material, made of heat treatment technology
- The double-ended long groove screwdriver head is suitable for use with Japanese gauge machines. The length from the screwdriver head to the groove is relatively long.
- Super hard, high toughness, wear resistance, high durability, precise dimensions
- Double-ended screwdriver head design, molded in one piece
- Torque can reach 180 kg/cm2 under normal use
- Excellent quality, lowest price, welcome to purchase in large quantities
Product specifications:
| Product number | Specification |
|---|---|
| EP08006522 | Cross #2 Double Head PH2 x 65mm |
| EP08011022 | Cross #2 Double Head PH2 x 110mm |
- British technical expertise manufacturing
- Patented automatic chip removal design
- Patented automatic water cooling function
- New patented grinding drill bit, more accurate drilling size, smooth cutting surface, and no cracking on the edge of the cutting object
- Precision combination of diamond and metal technology, fast cutting speed and reduced vibration
- Suitable for drilling construction stone
A dream for art lovers! Artists jointly issue limited edition art cloth measuring tapes. Each work contains the artist's unique style. It can not only add artistic color to your daily life, but also is a rare art collection opportunity. Explore our selection of art cloth tape measures, incorporate art into your daily life, and experience limitless beauty.
| Product Features: | |
| ● | Co-signed by artists, limited edition art cloth ruler |
| ● | The famous painter Chen Yushou's ink color transfer on silk is small and easy to carry, and has great art collection value. |
| ● | Centimeter/inch fiberglass double-sided ruler tape |
| ● | Automatic telescopic cloth ruler, automatically locks when the tape is pulled out, and retracts the tape with one click |
| ● | Mini measuring tape for measuring body measurements, can be used to measure height, waist circumference, chest circumference, furniture and items |
Screwdriver magnetizer and demagnetizer + Phillips No. 2 screwdriver head set (EP08006522-1)
$275.00
Unit price perScrewdriver magnetizer and demagnetizer + Phillips No. 2 screwdriver head set (EP08006522-1)
$275.00
Unit price per- Three-in-one functions of magnetizing, degaussing and magnetic screw suction
- Instantly magnetized, the magnetism increases and the screws will not fall off
- Can be quickly demagnetized
- NdFeB powerful magnet, the strongest permanent magnet, the magnetic attraction will never fade away
- You can choose to demagnetize or magnetize the screwdriver head according to your personal work needs.
- The screwdriver magnetizer pushes the front end of the screwdriver head and can also be used as a magnetic screw holder to prevent the screws from falling out.
- Comes with 10 2 cross size 2 screwdriver bits with a torque of 180kg-cm
Instructions for use:
- Magnetization: Put the magnetizer into a hexagonal handle screwdriver or driver head. The driver head will instantly become magnetic and can surely attract the screws and the screws will not fall out.
-
Degaussing: Rub the screwdriver or screwdriver head against the degaussing device on both sides of the outer ring of the magnet end to degauss.
Lightweight 5-stage lighting headlamp, 1W super bright white light LED headlamp work light, headlamp lighting angle can be adjusted, suitable for mountaineering, camping, night fishing and construction and repair, etc., IPX4 splash-proof design allows you to relax and work more smoothly.
The head-mounted 1W ultra-bright white light LED headlamp work light with a red light attachment design can be used as an emergency rescue function as well as a firefly viewing headlamp to observe fireflies and insects without disturbing them, helping you observe the dynamics of insects at night.
Lightweight and easy to store. Lightweight and comfortable headlamp with adjustable light strip to make you more comfortable when using it. The single switch headlamp is easy to use and is suitable for both adults and children.
Product Features:
- Lightweight 5-stage LED ultra-white LED headlamp, 1W brightness, suitable for mountaineering, camping, night fishing and construction and repair
- Lightweight and easy to store light and comfortable headlamp
- The headlight strip is adjustable to make your use more comfortable
- The headlight has a single switch design, which is easy to use even when wearing gloves
- Lighting up to 50 meters
- The headlight angle can be adjusted up and down
- IPX4 water-resistant design
- 5 lighting modes: full brightness, dim brightness, SOS, flashing and off
- The red light can be used as a headlight for firefly viewing, making it easier to observe insects.
Specifications:
| led | 1W |
| Ultra white light height (lumens) | 120Lm (Max) / 60Lm (Medium) / 30Lm (Min) 100% (3 hours) / 50% (5 hours) / 25% (10 hours) |
| Shell material | ABS plastic |
| Usage time (hours) | 3 hours (alkaline batteries) |
| Waterproof and dustproof | IPX4 |
| Using batteries | AAA size 4 x 3 pieces |
| Irradiation distance (meters) | 50M |
| weight | 40g (without battery) |
- Screwdriver magnetizer and demagnetizer made in Taiwan (screwdriver magnetizer and demagnetizer, screwdriver magnetizer and demagnetizer, screwdriver magnetizer and demagnetizer, screwdriver magnetizer and demagnetizer)
- For any screwdriver or other small metal tool, after putting it into the magnetizer or demagnetizer, a simple operation can make the metal magnetic or eliminate the magnetism, quickly and conveniently.
- Extra large open-end adjustable wrench made in Taiwan
- The opening is enlarged and the usability is increased by 18%.
- The hollow handle of the powerful adjustable wrench reduces weight and saves effort.
- The extra-large open adjustable wrench has a 60% wider side design, making it easier to apply force.
- Manufactured from professional grade chromium vanadium steel
-
The hollow movable wrench body CR-V SAE6140 has been specially heat treated and has a hardness of HRC 40-50
- Made in Taiwan, super American metal scissors (American aviation scissors, super American aviation scissors, American stainless steel metal scissors, American straight scissors)
- Serrated blade, not easy to slide, easier to cut
- The handle is nickel-zinc plated, and the blade is treated with special phosphate to prevent rust.
- Automatic pop-up design, press the handle latch to pop up instantly
- The handle is made of TPR+PP special plastic and has a comfortable grip.
- The blade is made of special chromium-molybdenum alloy steel and has undergone special heat treatment to make it tough and highly durable.
Product specifications:
- Specifications FM904301: 10" (250mm)
- Maximum cutting range: iron sheet 1.2mm / stainless steel 0.7mm
- Blade material: HRC60-62 degree chromium molybdenum alloy material
- Tool handle material: PP+TPR
- Made in Taiwan, ultra-thin extra large open adjustable wrench for hydropower (adjustable wrench, adjustable spanner, adjustable spanner, adjustable spanner, manual adjustable spanner)
- Professional grade chromium vanadium steel material, extra large opening design, large torque
- Comes with precision scale
-
Ergonomic handle, comfortable and easy to hold
- Made in Taiwan, 4-inch lightweight large-open adjustable wrench
- Professional grade chromium vanadium steel material
- Increase the opening by 18% and reduce the weight by 10%
- Special tiger claw design, anti-slip and anti-falling, maximizes torque and object-biting ability
- Comes with precision scale
-
Ergonomic handle, comfortable and easy to hold
- Silicon special caulking injection gun, the best tool for home DIY
- Silicone gun, made of ABS nylon, light weight, good toughness, impact resistance
- Strengthened structure, easy to operate, can be constructed by yourself
- Silicone gun, skeleton type, light and easy to carry, with needle attached
- The silicone gun pushes a steady amount, making it easy to control the injection flow and saving silicone consumption.
Product specifications:
- 310ml
- Body ABS nylon material
Introduction to use:
- Make sure the surface to be followed by caulking is dry and clean
- Cut the front end of silicone glue
- Connect the catheter head, and then cut off the catheter head at a 45° angle according to the amount of output.
- Install the silicone onto the silicone gun
- You can put paper masking tape on both sides of the construction area (or tear off the tape without leaving any adhesive residue) to prevent the silicone from sticking to other places.
- Apply silicone to the construction site
ICHINEN CHEMICALS CO., LTD. is an original tire stain removal and maintenance agent imported from Japan. It does not stick to your hands and does not require wiping or washing with water. It can be easily cleaned, polished and protected by just spraying .
- Spray it directly on the dirty tires and quickly penetrate the tire rubber surface. The foam will decompose into water and the stains will flow down with the water flow, thereby removing the dirt on the tire surface and restoring the original black and dark luster.
- No need to wipe or wash with water, just spray on tires to clean, shine and protect
- Contains anti-UV protection ingredients to prevent tire aging and deterioration caused by ozone and UV rays
use:
Tire cleaning, shine and UV protection
Content volume: 420ml
Origin: Japan
- Mini industrial air impact wrench made in Taiwan, mini industrial air impact wrench
- Durable Mini Air Impact Wrench
- Strict quality control, safe to use mini industrial-grade pneumatic wrench
- Suitable for production line use
Specifications:
- Striking structure: double ring hammer
- Drive shaft size: 1/2" square head
- No-load speed: 11000rpm
- Weight:1.3kgs
- Working torque: 0-450 ft-lb
- Maximum torque: 550 ft-lb
- Air consumption: 35 scfm
In the past, when driving nails, I held them with my hands and was always cautious, fearing that I would hit my hands. At the end of the hammering, I would hit the surface material as well, causing marks.
With the new nail holder, you don’t have to worry about hammering nails. It can fix 5 sizes of nails, including 1.5mm-2.5mm. You don’t have to worry about hammering nails anymore. When you want to hammer the nail tightly, use the other side to tap the side nail in a conical shape. It does not damage the surface material and can easily nail the nails.
feature of product:
- Nails can be easily attached
- Protect your fingers from knocking
- When you want to hammer a nail tight, use the hammering side.
- Only 10cm, can be carried anywhere
Material:
PP plastic
feature of product :
- 10-inch pump pliers, with a slotted screwdriver at the end/12-inch standard end
- Made of CR-V chromium vanadium steel, precision processed and durable
- Pump pliers, maximum opening 65mm
- Grooved connection, precise bite, maximum torque can be achieved
- Special positioning combination, bite distance, easy to adjust
- 7-position bite position, TPR anti-slip grip
Product specifications:
| Product number | Specification | ||
|---|---|---|---|
| size | Overall length(mm) | Load (Nm) | |
| FM908110 | 10" (250mm) | 263 | 84.7 |
| FM908112 | 12" (320mm) | 325 | 96.0 |
- Made in Taiwan, chromium vanadium steel Japanese diagonal pliers (Japanese electrician wire strippers, Japanese diagonal pliers, Japanese diagonal electrician shears, Japanese nozzle shears, Japanese diagonal nose pliers, Japanese electrician scissors, Japanese Electrician wire cutters, Japanese style offset pliers)
- The whole body is made of CR-V chromium vanadium alloy steel with special heat treatment and surface anti-rust treatment.
- The blade is specially ground, sharp and durable
- Precision cutout design
- Non-slip grip for easy use
- Suitable for electricians, telecommunications, electronics, electrical appliances and automobile maintenance
Product specifications:
- FM902106: 6"
- Suitable for soft iron wire 1.2mm and copper wire 2.0mm or less
- Chrome vanadium steel electronic plastic diagonal pliers made in Taiwan
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Precision notch design, cutting wires instantly
- Comes with springs and can be cut out of plastic, a favorite among model makers
- Comply with JIS standards, precise manufacturing process and excellent quality
- Hardness as high as 54~62 degrees
- Suitable for model making and electronics, telecommunications, communications, and electrician maintenance
- Non-slip handle for easy use
Product specifications:
- FM900306: 6 inches
- Made in Taiwan, chrome vanadium steel electronic diagonal pliers (electrician's wire strippers, diagonal nose pliers, diagonal electrician's shears, nozzle shears, diagonal nose pliers, electrician's pliers, electrician's wire cutters, offset pliers)
- The whole body is made of chromium vanadium steel alloy steel with special heat treatment
- The blade is specially ground, sharp and durable
- Easy cutting of fine and precise wires
- Hardness 54~62 degrees
- Precision cutout design, non-slip handle, easy to use
-
A good tool for electronics, telecommunications, communication, electrician repair and model making
Product specifications:
- FM900104: 4 inches
- FM900105: 5 inches
※4" is suitable for soft wires below 1.0mm
※Not suitable for cutting steel wires
- Made in Taiwan, chrome vanadium steel diagonal nose pliers for electricians (wire strippers for electricians, diagonal nose pliers for electricians, diagonal nose electrician shears for electricians, water cutters for electricians, diagonal nose pliers for electricians, electrician shears, wire cutters for electricians, Electrician's offset pliers)
- The whole body adopts special heat treatment of chromium vanadium alloy steel, which has higher hardness than carbon steel and is super durable.
- Attached spring, easier to use
- The blade is specially ground, sharp and durable
- Comfortable grip design
- Hardness 54~62 degrees
-
Applicable to electricians, telecommunications, communications, electronics, and automobile industries
Scope of application:
- Iron wire 2.0mm or less ※Not applicable to steel wire
Product specifications:
- 6"(150mm)
- Chrome vanadium steel carp pliers made in Taiwan
- The opening bites tightly, the material is solid, and the quality is guaranteed
- Open 2-stage bite position
- Chrome vanadium steel alloy steel, chrome plated and heat treated, durable
- Hardness 55~63 degrees
- Anti-slip handle design, easy to hold
-
Suitable for water, electricity, cars and homes
- HSS high speed steel, super hard and durable
- The pipe mouth trimming speed is fast, which makes the processed surface smoother and less likely to have burrs.
- Suitable for scraping the burrs of copper, brass, aluminum pipes, iron pipes and plastic pipes..
-
Suitable for all Baileys pen-type copper pipe scrapers
Product specifications:
Product number Specification FM91200-1 Blades (10 pieces/card) Origin:
- Taiwan
Applicable Products:
- Suitable for copper, brass, aluminum tubes and other metal thin tubes
- Single size elbow, convenient and fast
- Can be bent up to 180° with minimal force
- Compact design, when bending, the copper pipe bends beautifully and is not prone to wrinkles
The 3rd generation upgraded aluminum alloy ratchet manual and electric dual-purpose copper tube expander combines manual and electric functions to provide an efficient and labor-saving tube expanding experience. Made of lightweight and durable aluminum alloy, it is suitable for all types of copper tube expansion operations and is an ideal choice for professional workers. Its unique design includes a magnet and a physical tenon structure, with accurate double-sided positioning to ensure stable operation. The spring design allows for quick replacement of the clamping row, while the automatic tripping mechanism can produce an idling effect to prevent scratching of the tube, making the bell mouth smoother and more beautiful.
Product Features:
- Lightweight aluminum alloy body, with special eccentric key design, to achieve labor-saving, fast and accurate 45° bell-mouth expansion effect
- Equipped with an automatic tripping mechanism, the spring will automatically pop open, producing an idling effect, effectively preventing scratches on the tube and making the bell mouth smoother and more beautiful
- Applicable specifications: 1/4", 3/8", 1/2", 5/8", 3/4"
- Made of aerospace grade aluminum alloy, durable and lightweight, suitable for various professional needs
product description
- Manual and electric dual-purpose aluminum alloy ratchet hand electric pipe expander
- Lightweight design, aluminum alloy copper pipe expander
- Ratchet function saves time and effort
- Eccentric tapered flaring tool
- It can be used with an electric drill or driver. The optimal torque is 80-180kg/cm, and the rotation speed is optimally set at 400rpm (excessive torque and speed will cause damage to the tool and affect the copper pipe interface)
- The slide rail indicates positioning and does not deviate
-
It is suitable for aluminum, copper pipes and new refrigerant pipes R410A, etc. It can efficiently handle copper pipes used in general refrigerant coal piping. It is easy to operate and saves time and effort.
Product specifications:
Product number Applicable copper pipe specifications BX-FT1434A 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
Galvanized bolts are special bolts for chemical anchors and are essential fixing system accessories in construction projects. They are used with anchor glue or glass bottle chemical anchors to provide stable and durable structural connections. They are widely used in high-strength fixing needs to ensure long-term safety and reliability.
Applicable:
Special bolts for anchoring glue and chemical anchors
Specifications:
※ If you have any needs, please contact us
Percussion nylon quick nails, also known as nylon nails, nylon nails, grid nails or vertical grid nails, are hardware tools that can fix objects on walls or ceilings.
Utilizing the elasticity of nylon material, it can expand in the hole after knocking, forming friction, so that the object and the wall are closely combined, replacing the trouble of buying plastic plugs and nails. The combined nylon quick knocking nails eliminate the need for Save you the trouble and make your construction faster.
feature of product:
| ● | Quick and easy installation, high stability |
| ● | Use a hammer to install and secure |
| ● | Provides quick knock protection, high knock load force to increase bolt sleeve gripping force |
| ● | High quality nylon material |
| ● | percussion fixation |
| ● | Suitable for wood, corrugated board, brick wall, cement wall |
Origin:
Taiwan
- The chisel head used with the electric hammer drill eliminates the need for force and is easy to use.
- High speed steel, super hard and durable
- SDS four groove design
- Pointed chisel: used for knocking tiles, chiseling and repairing pipelines, removing surface paint dust, tiles, and gypsum coverings, chiseling and repairing structural connections, light chiseling, suitable for delicate construction by various engineers
-
Flat chisel: suitable for chiseling, cleaning and crushing concrete and brick demolition
-
Product specifications: model Specification length width AE003 SDS four groove point chisel 245mm - AE004 SDS four groove flat chisel 200mm 18mm Origin: Taiwan
Showing 690/734