I drilled, drilled, drilled, drilled, alas, the screw fell off again. How can I fix the screw and let me work once? With the magnetic screw holder, you don't have to worry about drilling once. This eliminates the inconvenience of screws falling off when initially drilling, effectively improving efficiency.

feature of product:

• The magnetic screw holder can correctly fix the screws without being too tight or too loose, ensuring the quality of the work.
• Magnetic screw holder fixes the screws not easily falling off
• Screw magnetic holder, permanent magnetic design
• Suitable for screws of any length and easy to operate
• The magnetic screw holder comes with a professional unloading screwdriver, which is 6 times more durable.
• Suitable for weak electricity, communications, surveillance, water and electricity, electrical machinery, carpentry and DIY use
• Made in Taiwan

Removable screw fixing agent is a single-liquid, medium-strength, thixotropic anaerobic adhesive, specially designed for screws that require tools to be removed. It is suitable for the surfaces of two closely connected metal parts. The bonding will be solidified when used under oxygen-deficient conditions. Even if it is subject to vibration or impact, it can prevent leakage and loosening of the connected parts. After fixation, it can also avoid contamination or corrosion from other chemicals and achieve anti-rust effect.

feature of product:

• Screw fixing agents made in Taiwan (screw fixing glue, screw glue, anti-loosening glue, thread locking agent, thread screw glue, fastening glue, anaerobic glue, removable screw glue)
• Suitable for screws and fasteners smaller than M20, removable fixing screw fixative
• It can prevent nuts, bolts and screws from loosening due to thermal expansion, contraction or vibration. The screws will not loosen after being fixed, making tools and instruments highly safe.
• It can resist the corrosion of lubricating oil, engine oil, gasoline, weak acid, weak alkali and most chemicals to achieve anti-rust effect.
• Replaces traditional screw washers or washers, easy to assemble
• Non-toxic, solvent-free, no shrinkage after hardening

Notice:
Removable screw fixing agents are not suitable for pure oxygen or oxygen-rich environments, and cannot be used on materials that contain chlorine or are highly susceptible to oxidation.

If you use liquid to clean the surface of the object before joining, please pay special attention to the compatibility of the glue and the cleaning water. In some cases, these solutions will affect the curing and performance of the glue. Under normal circumstances, this product is not recommended for use on plastic products (especially thermoplastic plastics, which may crack due to pressure). Users are advised to confirm the compatibility of the object first.

Product specifications:

• Main ingredients: acrylate
• Viscosity: 1600-5500CPS
• Hardening speed: 15 minutes
• Breakaway torque: 22 Nm (Newton meters)
• Friction torque: 10 Nm (Newton meters)
• Temperature range: -54~150℃
• Capacity: 10ml

Instructions:

Assemble
1. For best results, the surface of the object must be clean and free of oil.
2. Shake thoroughly before use.
3. If the substrate is an inactive metal, consider using a catalyst
4. Appropriate amount of removable screw fixing agent should be applied to the thread engagement, but only the first turn of threads should be left without sealant. If the thread is larger, you need to increase the amount of coating and drip an appropriate amount of glue on the nut.
5. Assemble and tighten the screws and nuts
6. Use appropriate tools to tighten until a proper fit is achieved. Allows to sit for 24 hours for maximum strength

Disassembly
1. Disassemble with standard tools
2. In some cases, if it cannot be removed with tools, the bolt or nut can be removed by locally heating the bolt or nut.

clean
1. Remove the hardened product by brushing with solvent

Origin:
Taiwan

Permanent screw fixative is a single liquid, medium to high strength, thixotropic anaerobic adhesive. It is suitable for the surfaces of two closely connected metal parts. The bonding will be solidified when used under oxygen-deficient conditions. Even if it is subject to vibration or impact, it can prevent leakage and loosening of the connected parts.

Screw fixing agent is mainly used to fix metal screws and fasteners to prevent screws, bolts and nuts from loosening due to vibration and enhance safety. In addition, after being fixed, it can also avoid contamination or corrosion from other chemicals and achieve anti-rust effect.

feature of product:

• Screw fixing agents made in Taiwan (screw fixing glue, screw glue, anti-loosening glue, thread locking agent, thread screw glue, fastening glue, anaerobic glue, permanent fixing screw glue)
• Suitable for permanent fixing of screws and fasteners smaller than M20
• It can prevent nuts, bolts and screws from loosening due to thermal expansion, contraction or vibration. The screws will not loosen after being fixed, making tools and instruments highly safe.
• It can resist the corrosion of lubricating oil, engine oil, gasoline, weak acid, weak alkali and most chemicals to achieve anti-rust effect.
• Replaces traditional screw washers or washers, easy to assemble
• Non-toxic, solvent-free, no shrinkage after hardening

Notice:
Permanent screw fixatives are not suitable for pure oxygen or oxygen-rich environments, and cannot be used on materials that contain chlorine or are highly susceptible to oxidation.

If you use liquid to clean the surface of the object before joining, please pay special attention to the compatibility of the glue and the cleaning water. In some cases, these solutions will affect the curing and performance of the glue. Under normal circumstances, this product is not recommended for use on plastic products (especially thermoplastic plastics, which may crack due to pressure). Users are advised to confirm the compatibility of the object first.

Product specifications:

• Main ingredients: acrylate
• Viscosity: 1600-5500CPS
• Hardening speed: 15 minutes
• Breakaway torque: 22 Nm (Newton meters)
• Friction torque: 10 Nm (Newton meters)
• Temperature range: -54 ~ 150℃
• Capacity: 10ml

Instructions:

Assemble
1. For best results, the surface of the object must be clean and free of oil.
2. Shake thoroughly before use.
3. If the substrate is an inactive metal, consider using a catalyst
4. An appropriate amount of permanent screw fixing agent should be applied to the thread engagement, but only the first turn of threads should be left without sealant. If the thread is larger, you need to increase the amount of coating and drip an appropriate amount of glue on the nut.
5. Assemble and tighten the screws and nuts
6. Use appropriate tools to tighten until a proper fit is achieved. Allows to sit for 24 hours for maximum strength

clean
1. Remove the hardened product by brushing with solvent

Origin:
Taiwan

Galvanized bolts are special bolts for chemical anchors and are essential fixing system accessories in construction projects. They are used with anchor glue or glass bottle chemical anchors to provide stable and durable structural connections. They are widely used in high-strength fixing needs to ensure long-term safety and reliability.

Applicable:
Special bolts for anchoring glue and chemical anchors

Specifications:

※ If you have any needs, please contact us

Stainless steel screws and tin screws (tin bolts) are key components in modern construction and industrial applications, with excellent fixing performance. These professional fixing systems can effectively withstand high loads and are suitable for various environments. When installed with chemical anchors, they provide higher fixing stability, especially in concrete or stone structures, and can achieve a strong fastening effect. Whether it is mechanical equipment, building structure or pipeline setting, these high-quality accessories can ensure long-term and stable use and are widely used in various industrial and engineering projects.

Product Features:

• Screw for anchoring
• Stainless steel material

Detailed specifications of each model:

*Suitable for use with chemical anchors and rebar glue. If you have any needs, it is recommended that you consult local screw hardware stores.

Removable screw fixing agent is a single-liquid, medium-strength, thixotropic anaerobic adhesive, specially designed for screws that require tools to be removed. It is suitable for the surfaces of two closely connected metal parts. The bonding will be solidified when used under oxygen-deficient conditions. Even if it is subject to vibration or impact, it can prevent leakage and loosening of the connected parts. After fixation, it can also avoid contamination or corrosion from other chemicals and achieve anti-rust effect.

feature of product:

• Screw fixing agents made in Taiwan (screw fixing glue, screw glue, anti-loosening glue, thread locking agent, thread screw glue, fastening glue, anaerobic glue, removable screw glue)
• Suitable for screws and fasteners smaller than M20, removable fixing screw fixative
• It can prevent nuts, bolts and screws from loosening due to thermal expansion, contraction or vibration. The screws will not loosen after being fixed, making tools and instruments highly safe.
• It can resist the corrosion of lubricating oil, engine oil, gasoline, weak acid, weak alkali and most chemicals to achieve anti-rust effect.
• Replaces traditional screw washers or washers, easy to assemble
• Non-toxic, solvent-free, no shrinkage after hardening

Notice:
Removable screw fixing agents are not suitable for pure oxygen or oxygen-rich environments, and cannot be used on materials that contain chlorine or are highly susceptible to oxidation.

If you use liquid to clean the surface of the object before joining, please pay special attention to the compatibility of the glue and the cleaning water. In some cases, these solutions will affect the curing and performance of the glue. Under normal circumstances, this product is not recommended for use on plastic products (especially thermoplastic plastics, which may crack due to pressure). Users are advised to confirm the compatibility of the object first.

Product specifications:

• Main ingredients: acrylate
• Viscosity: 1600-5500CPS
• Hardening speed: 15 minutes
• Breakaway torque: 22 Nm (Newton meters)
• Friction torque: 10 Nm (Newton meters)
• Temperature range: -54~150℃
• Capacity: 10ml

Instructions:

Assemble
1. For best results, the surface of the object must be clean and free of oil.
2. Shake thoroughly before use.
3. If the substrate is an inactive metal, consider using a catalyst
4. Appropriate amount of removable screw fixing agent should be applied to the thread engagement, but only the first turn of threads should be left without sealant. If the thread is larger, you need to increase the amount of coating and drip an appropriate amount of glue on the nut.
5. Assemble and tighten the screws and nuts
6. Use appropriate tools to tighten until a proper fit is achieved. Allows to sit for 24 hours for maximum strength

Disassembly
1. Disassemble with standard tools
2. In some cases, if it cannot be removed with tools, the bolt or nut can be removed by locally heating the bolt or nut.

clean
1. Remove the hardened product by brushing with solvent

Origin:
Taiwan