Permanent screw fixing agent (DH-TL06210)

Permanent screw fixative is a single liquid, medium to high strength, thixotropic anaerobic adhesive. It is suitable for the surfaces of two closely connected metal parts. The bonding will be solidified when used under oxygen-deficient conditions. Even if it is subject to vibration or impact, it can prevent leakage and loosening of the connected parts.

Screw fixing agent is mainly used to fix metal screws and fasteners to prevent screws, bolts and nuts from loosening due to vibration and enhance safety. In addition, after being fixed, it can also avoid contamination or corrosion from other chemicals and achieve anti-rust effect.

feature of product:

• Screw fixing agents made in Taiwan (screw fixing glue, screw glue, anti-loosening glue, thread locking agent, thread screw glue, fastening glue, anaerobic glue, permanent fixing screw glue)
• Suitable for permanent fixing of screws and fasteners smaller than M20
• It can prevent nuts, bolts and screws from loosening due to thermal expansion, contraction or vibration. The screws will not loosen after being fixed, making tools and instruments highly safe.
• It can resist the corrosion of lubricating oil, engine oil, gasoline, weak acid, weak alkali and most chemicals to achieve anti-rust effect.
• Replaces traditional screw washers or washers, easy to assemble
• Non-toxic, solvent-free, no shrinkage after hardening

Notice:
Permanent screw fixatives are not suitable for pure oxygen or oxygen-rich environments, and cannot be used on materials that contain chlorine or are highly susceptible to oxidation.

If you use liquid to clean the surface of the object before joining, please pay special attention to the compatibility of the glue and the cleaning water. In some cases, these solutions will affect the curing and performance of the glue. Under normal circumstances, this product is not recommended for use on plastic products (especially thermoplastic plastics, which may crack due to pressure). Users are advised to confirm the compatibility of the object first.

Product specifications:

• Main ingredients: acrylate
• Viscosity: 1600-5500CPS
• Hardening speed: 15 minutes
• Breakaway torque: 22 Nm (Newton meters)
• Friction torque: 10 Nm (Newton meters)
• Temperature range: -54 ~ 150℃
• Capacity: 10ml

Instructions:

Assemble
1. For best results, the surface of the object must be clean and free of oil.
2. Shake thoroughly before use.
3. If the substrate is an inactive metal, consider using a catalyst
4. An appropriate amount of permanent screw fixing agent should be applied to the thread engagement, but only the first turn of threads should be left without sealant. If the thread is larger, you need to increase the amount of coating and drip an appropriate amount of glue on the nut.
5. Assemble and tighten the screws and nuts
6. Use appropriate tools to tighten until a proper fit is achieved. Allows to sit for 24 hours for maximum strength

clean
1. Remove the hardened product by brushing with solvent

Origin:
Taiwan