Dutch B+BTec glass chemical anchor anchor structural reinforcement material suitable for equipment foundation fixed shading project (DM-VDP-EAM)

feature of product:

• Dutch B+BTec glass chemical anchors, unparalleled fastening power, cannot be replaced by any Anka
• Rotating the implant instantly cleans the hole wall, mixes glass and quartz particles, carves the wall surface and quickly removes dust.
• The risk of failure rate can still be maintained to a minimum when performed by non-permanent professional staff ~ almost "zero"
• Providing accurate dosage and equal-proportion mixing guarantee
• Construction temperature ranges from -5℃ to 40℃, wide application range
• Glass chemical anchors (chemical anchors) are suitable for heavy loads and various vibration loads
• Glass chemical anchors (chemical anchors) are suitable for various operations and underwater construction (can be used in humid environments)
• Glass chemical anchors (chemical anchors) are suitable for small spacings, margins and narrow spaces
• Glass chemical anchors (chemical anchors) do not produce compressive stress on concrete and can be used on various base materials
• Glass chemical anchors (chemical anchors) are completely bonded to the structure, resistant to vibration and heat, not weathered, not aged, acid and alkali resistant, and corrosion resistant
• Glass chemical anchors (chemical anchors) provide the shortest hardening time and greatly improve efficiency
• Non-parallel expansion reaches maximum gripping force
• The creep life has actually been proven to exceed 40 years, with no failure record.
• The only number of pull-out tests after installation is almost single digits, and it is currently the safest construction method.
• Taking quality assurance, follow-up service and testing costs into consideration, it is actually the most economical gravity-type fixed series.
• The longest retention period (more than two years)

Application scope:

• No steel bars are reserved for new construction projects, such as atrium garden railings, continuous walls, beams, columns, floor slabs, etc.
• Addition, renovation, engineering change design or structural reinforcement of old buildings
• Ports, bridges, high-load structures
• Shade project
• It can fix heavy machinery equipment, wall panels and crane tracks, safe and reliable

Installation steps instructions:

• Drill holes in concrete using a power hammer drill using the recommended hole diameter and depth.
• Use a diamond drill to drill holes where the steel bars need to be penetrated.
• Use a brush, blower or water to clean the hole.
• Check the chemical anchor agent tube to confirm that it is not damaged and that the resin inside can flow normally.
• Insert the medicine tube into a clean hole with the round head facing inward.
• Make sure the screw is clean, use the installation tool and electric hammer drill to rotate the screw to the bottom of the hole at a uniform speed (it is recommended that the electric hammer drill speed is 250-500rpm) to rupture the medicine tube and allow the medicine to be fully mixed.
• Check whether there is any chemical overflow on the surface of the hole to ensure that the hole is full; check whether the screw burial depth reaches the surface of the base material to ensure that the screw reaches the required burial depth.
• Wait for the agent to cure according to the recommended curing time. During this period, do not collide or knock the chemical anchors.
• Install artifacts

Origin: Netherlands